Power Metering Solution — GE MTM-120(S-A20-120VA) | Meter Module
Where This Product Is Used
The GE MTM-120(S-A20-120VA) Meter Module is deployed across a wide range of industrial and commercial power distribution environments where accurate, real-time electrical measurement is critical to operations and safety compliance:
- Motor Control Centers (MCC) — Monitors current draw per motor circuit, enabling early detection of overload conditions and predictive maintenance scheduling.
- Low-Voltage Switchgear Panels — Provides panel-level metering for voltage, current, power factor, and energy consumption without requiring external transducers.
- Industrial Power Distribution Boards — Integrates into feeder circuits in manufacturing plants, chemical facilities, and heavy industry to support energy auditing and load balancing.
- Building Management Systems (BMS) — Feeds real-time electrical data to SCADA or BMS platforms for centralized energy monitoring and demand management.
- Utility Substations & Distribution Automation — Used in secondary distribution panels where compact, DIN-rail-mountable metering is required alongside protection relays.
- Data Centers & Critical Infrastructure — Supports power quality monitoring at the PDU or branch circuit level to ensure uptime and compliance with power SLAs.
- Water Treatment & Pumping Stations — Monitors pump motor energy consumption and power factor for efficiency optimization and regulatory reporting.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | MTM-120(S-A20-120VA) |
| Manufacturer | General Electric (GE) |
| Module Type | Meter Module |
| Rated Burden | 120 VA |
| Suffix Code | S-A20 |
| Mounting | Panel / DIN-rail compatible (per series) |
| Measured Parameters | Voltage, Current, Power Factor, Active/Reactive Power, Energy (kWh) |
| Communication | Refer to GE series documentation for protocol options (Modbus RTU / DNP3) |
| Operating Temperature | -20°C to +70°C (typical industrial range) |
| Weight | 7,000 g (shipping weight) |
| Compliance | See Compliance section below |
Note: Always verify specifications against the official GE MTM-120 series datasheet for your specific application requirements.
Why Engineers Specify This Model
- Compact Form Factor — Fits within existing switchgear and MCC enclosures without requiring panel redesign or additional space allocation.
- High Accuracy Metering — Delivers revenue-grade or sub-revenue-grade accuracy suitable for energy cost allocation and billing verification.
- Plug-and-Play Integration — Designed to integrate directly with GE’s protection relay and control system ecosystem, reducing engineering hours during commissioning.
- Robust Industrial Rating — Built to withstand the vibration, temperature cycling, and EMI environments typical of heavy industrial installations.
- Proven GE Platform — Part of a well-documented, widely supported product family with long-term spare parts availability and global service network.
- Reduced Wiring Complexity — Consolidates multiple measurement functions into a single module, minimizing field wiring and potential failure points.
Complete System Bill of Materials
For a complete metering and protection system built around the MTM-120, engineers typically specify the following complementary components:
- Current Transformers (CTs) — matched to the MTM-120 input rating (e.g., 5A secondary)
- Voltage Transformers (VTs) / Potential Transformers (PTs) — for HV applications
- GE Multilin Protection Relay (e.g., 750/760 series) — for integrated protection and metering
- DIN Rail & Mounting Hardware — 35mm DIN rail, end stops, and terminal blocks
- Communication Gateway / RTU — for Modbus or DNP3 integration to SCADA
- HMI / Energy Management Software — for data visualization and reporting
- Surge Protection Devices (SPDs) — for transient voltage protection on metering inputs
- Enclosure / Panel (IP54 or higher) — for outdoor or harsh environment installations
Contact support@konmask.com for BOM assistance and compatible part sourcing.
Compliance & Industry Standards
- IEC 61557 — Electrical safety in low-voltage distribution systems
- IEC 62053 — Electricity metering equipment accuracy classes
- ANSI C12.20 — Revenue metering accuracy standard (North American applications)
- UL 508A — Industrial control panel standard (where applicable)
- CE Marking — European conformity for EMC and Low Voltage Directive
- RoHS Compliant — Restriction of Hazardous Substances
Verify applicable certifications with the GE product datasheet and your regional regulatory authority.
Quality Assurance & Sourcing
- Authorized Distribution Channels — Konmask.com sources GE automation components through verified industrial distribution networks to ensure product authenticity.
- Pre-Shipment Inspection — Each unit undergoes visual inspection and packaging integrity checks before dispatch.
- Traceability — Lot numbers and date codes are documented for full supply chain traceability.
- Anti-Counterfeit Policy — We do not source from grey-market or unverified secondary suppliers. All products are accompanied by original manufacturer documentation where available.
- Warranty — Subject to GE’s standard warranty terms. Contact us for details specific to this part number.
How to Source This Part
- Add to Cart — Click the purchase button above to place an order directly through Konmask.com.
- Request a Quote — For bulk orders (>5 units) or project-based procurement, email support@konmask.com with your project BOM and required delivery timeline.
- Lead Time — Standard lead time is 3–10 business days depending on stock availability. Expedited shipping available on request.
- Export & Cross-Border Orders — We support international procurement. Contact us for export documentation, HS code confirmation, and freight options.
- Technical Pre-Sales Support — Our engineering team can assist with compatibility verification, application review, and alternative part recommendations.
Application-Specific FAQ
Q: Can the MTM-120(S-A20-120VA) be used in a 3-phase 4-wire system?
A: The MTM-120 series supports multi-phase metering configurations. Confirm the specific wiring topology (3P3W, 3P4W) against the GE installation manual for your suffix code.
Q: Is this module compatible with GE Multilin relays?
A: Yes, the MTM-120 is designed for integration within GE’s protection and control ecosystem. Verify compatibility with your specific Multilin relay model and firmware version.
Q: What communication protocol does this module support?
A: Depending on the configuration suffix, the MTM-120 series supports Modbus RTU and/or DNP3. Refer to the GE MTM-120 communication manual or contact us for protocol confirmation.
Q: Can I use this in a retrofit project replacing an older GE meter module?
A: In many cases, yes. The MTM-120 series is designed with backward compatibility in mind for GE panel upgrades. Provide your existing part number to our team for a compatibility assessment.
Q: Do you provide installation support or commissioning services?
A: Konmask.com provides pre-sales technical support and documentation. For on-site commissioning, we can refer you to qualified GE-certified system integrators in your region.
Q: What is the minimum order quantity?
A: Single units are available. Volume pricing applies for orders of 5+ units. Contact us for project pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




