GE PC2IP3 Profibus DP Communication Card | Replacement, Equivalent & Selection Guide
The GE PC2IP3 is a Profibus DP Communication Card designed for the GE Fanuc IC693 Series PLC platform. It enables high-speed, deterministic fieldbus communication between the PLC controller and distributed I/O devices, drives, sensors, and other Profibus DP-compatible field instruments. Widely deployed in discrete manufacturing, process control, and motion-intensive applications, the PC2IP3 remains a critical component in legacy and active GE automation architectures.
At Konmask.com, we supply genuine, tested, and refurbished PC2IP3 cards with full traceability — serving procurement engineers who require verified sourcing and rapid delivery.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | PC2IP3 |
| Manufacturer | GE / GE Fanuc Automation |
| Series | IC693 (Series 90-30) |
| Module Type | Profibus DP Communication Card |
| Fieldbus Protocol | Profibus DP (EN 50170 / IEC 61158) |
| Baud Rate | 9.6 kbps – 12 Mbps (auto-detect) |
| Max Slave Devices | Up to 125 Profibus DP slaves |
| Connector | 9-pin Sub-D (DB9) female |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Humidity | 5% – 95% non-condensing |
| Power Consumption | Supplied via IC693 backplane |
| Form Factor | Single-slot IC693 module |
| Approvals | CE, UL |
| Weight | Approx. 300 g |
Compatible Replacement & Equivalent Models
When the PC2IP3 is discontinued, hard to source, or requires a functional upgrade, the following alternatives are evaluated by our engineering team:
| Model | Brand | Protocol | Compatibility Notes |
|---|---|---|---|
| IC693CMM321 | GE Fanuc | Profibus DP | Direct GE platform replacement; same IC693 backplane slot |
| IC693CMM311 | GE Fanuc | Genius Bus | Alternative if migrating to Genius fieldbus topology |
| IC695PBM300 | GE / Emerson | Profibus DP Master | RX3i platform upgrade; requires backplane migration |
| CP343-5 | Siemens | Profibus DP | Cross-brand equivalent for S7-300; requires re-engineering |
| 1756-DPB | Allen-Bradley | Profibus DP | ControlLogix platform; full re-architecture required |
Note: Cross-brand replacements require GSD file reconfiguration and I/O mapping validation. Contact our engineers for a compatibility assessment.
Why Choose the Original PC2IP3
- Zero re-engineering cost — drop-in replacement for existing IC693 racks with no software changes
- Proven fieldbus stability — deterministic Profibus DP timing validated in high-cycle manufacturing environments
- GSD file compatibility — works with all existing GSD-based device configurations without modification
- Minimal downtime — hot-swap capable within IC693 architecture; reduces maintenance window
- Long service life — robust industrial-grade PCB design rated for continuous 24/7 operation
Typical Applications
- Automotive assembly lines with distributed Profibus DP I/O slaves
- Packaging machinery with servo drives and variable frequency drives (VFDs) on Profibus
- Water treatment and utilities with remote I/O panels
- Food & beverage processing with hygienic distributed control nodes
- Material handling and conveyor systems with Profibus-enabled sensors and actuators
- Oil & gas upstream/downstream control panels
System Compatibility
| Component | Compatible Models |
|---|---|
| PLC Rack | IC693CHS391, IC693CHS392, IC693CHS393, IC693CHS397, IC693CHS398 |
| CPU | IC693CPU311, IC693CPU313, IC693CPU321, IC693CPU331, IC693CPU340, IC693CPU341, IC693CPU350, IC693CPU360, IC693CPU363, IC693CPU364, IC693CPU374 |
| Power Supply | IC693PWR321, IC693PWR322, IC693PWR330, IC693PWR331 |
| Programming Software | Proficy Machine Edition (ME) v5.0 and above |
| Profibus DP Slaves | Any EN 50170-compliant Profibus DP slave device with valid GSD file |
Selection Guide
Use this guide to determine whether the PC2IP3 or an alternative best fits your application:
| Requirement | Recommended Model |
|---|---|
| Direct drop-in for existing IC693 rack (Profibus DP) | PC2IP3 (original) or IC693CMM321 |
| Upgrade to RX3i platform, retain Profibus DP | IC695PBM300 |
| Migrate to Ethernet-based fieldbus (EtherNet/IP) | IC695ETM001 + gateway adapter |
| Migrate to PROFINET | IC695PNC001 (RX3i) + network redesign |
| Cross-brand migration to Siemens S7-300 | CP343-5 + full I/O remapping |
| Budget-constrained: refurbished original | PC2IP3 (tested refurbished) — available at Konmask.com |
Quality Assurance & Sourcing
- Genuine & refurbished stock — all units inspected, tested, and verified before shipment
- Traceability documentation — batch records and test reports available on request
- Anti-counterfeit verification — physical inspection of PCB markings, date codes, and component authenticity
- 90-day warranty on all refurbished units; 12-month warranty on new-in-box stock
- ESD-safe packaging — shipped in anti-static bags with foam protection
- Export compliance — ECCN classification and export documentation provided for international orders
How to Order
- Confirm your IC693 rack model and available slot position
- Verify Profibus DP master/slave topology and baud rate requirements
- Contact Konmask.com with your part number (PC2IP3) and required quantity
- Receive quotation with lead time, warranty terms, and shipping options
- Submit PO — we accept T/T, L/C, and major payment platforms
- Receive unit with test report, packing list, and commercial invoice
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Is the PC2IP3 still in production?
A: GE Fanuc has transitioned many IC693 modules to end-of-life status. Konmask.com maintains refurbished and new-old-stock (NOS) inventory to support legacy systems.
Q: Can I replace PC2IP3 with IC693CMM321 without reprogramming?
A: In most cases, yes — both are IC693 Profibus DP cards. However, GSD file re-import and I/O address verification in Proficy ME is recommended before going live.
Q: Does PC2IP3 support Profibus PA?
A: No. PC2IP3 supports Profibus DP only. For Profibus PA, a DP/PA coupler (e.g., Siemens DP/PA Link) is required in the field segment.
Q: What is the maximum cable length for Profibus DP at 12 Mbps?
A: At 12 Mbps, maximum segment length is 100 m. Use repeaters to extend the network. At 9.6 kbps, maximum segment length is 1,200 m.
Q: Can Konmask.com provide a test report for the PC2IP3?
A: Yes. All units are functionally tested and a test report is included with shipment upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


