Process Control & DCS Solution — Honeywell 8C-PAOHA1 51454469-275 | Experion C300 Series
Where This Product Is Used
The Honeywell 8C-PAOHA1 (P/N 51454469-275) is an 8-channel analog output module designed for deployment within Honeywell’s Experion PKS C300 Controller architecture. It is specified by process engineers and control system integrators across the following industries and applications:
- Oil & Gas Upstream & Midstream — wellhead control panels, separator skids, compressor station automation, and pipeline SCADA integration
- Petrochemical & Refining — distillation column control, reactor temperature/pressure regulation, and fired heater management
- Power Generation — boiler combustion control, turbine governor interfaces, and balance-of-plant (BOP) automation
- Pulp & Paper / Chemical Processing — continuous process loops requiring high-density analog output with HART diagnostics
- Water & Wastewater Treatment — pump speed control via VFD interfaces, dosing system regulation, and clarifier drive control
- Pharmaceutical & Food & Beverage — validated batch process control where SIL-rated I/O and audit trails are mandatory
Wherever a Honeywell Experion C300 DCS is the backbone of a process plant, the 8C-PAOHA1 is the standard analog output I/O module of choice.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 8C-PAOHA1 / 51454469-275 |
| Manufacturer | Honeywell Process Solutions |
| Series / Platform | Experion PKS — C300 Controller I/O |
| Module Type | Analog Output (AO) |
| Channel Count | 8 channels |
| Output Signal | 4–20 mA (current loop) |
| HART Communication | HART 5/6/7 per channel (field device diagnostics) |
| Resolution | 16-bit DAC |
| Accuracy | ±0.1% of full scale |
| Loop Power | External loop power required (24 VDC typical) |
| Isolation | Channel-to-channel and channel-to-bus isolation |
| Backplane Interface | EUCN / Series C I/O Link |
| Operating Temperature | 0°C to +60°C |
| Humidity | 5% to 95% RH, non-condensing |
| Dimensions (H×W×D) | Refer to Honeywell datasheet 51454469 |
| Weight | Approx. 0.3 kg (module only) |
| Certifications | CE, UL, FM, ATEX (zone 2 barrier), SIL 2 capable |
Why Engineers Specify This Model
- Native C300 Integration — Plug-and-play with Experion PKS R500+ without additional configuration gateways or protocol converters
- Per-Channel HART — Enables online valve diagnostics, positioner calibration, and predictive maintenance without loop interruption
- High-Density I/O — 8 AO channels per slot reduces cabinet footprint and wiring cost versus legacy single-channel modules
- Hot-Swap Capable — Module replacement under power with zero process interruption when used with redundant I/O carriers
- SIL 2 Capable — Suitable for safety instrumented function (SIF) loops when integrated with Honeywell Safety Manager per IEC 61511
- Proven Field Reliability — Widely deployed in tier-1 refineries and chemical plants globally; long-term spare parts availability confirmed
Complete System Bill of Materials
The 8C-PAOHA1 module operates within the Experion C300 I/O subsystem. A complete functional assembly typically requires:
- C300 Controller — CC-PCNT01 or CC-PCNT11 (redundant pair)
- EUCN Cable / Fiber — CC-TAIX11 or CC-TAIX51 (Extended Universal Control Network)
- I/O Link Interface Module (IOLIM) — CC-PDOB01 or equivalent
- I/O Carrier / Termination Assembly — 8C-TAOX12 (standard) or 8C-TAOX22 (HART-enabled termination)
- 8C-PAOHA1 51454469-275 — This module (AO, 8-ch, HART)
- 24 VDC Loop Power Supply — Redundant PSU recommended (e.g., Honeywell CC-PWR001)
- Field Junction Box / Marshalling Cabinet — Per plant cabling standard
Contact Konmask for complete BOM quotation and cross-reference to your existing Experion revision.
Compliance & Industry Standards
- IEC 61131-2 — Programmable controllers: equipment requirements and tests
- IEC 61511 / ISA-84 — Functional safety for SIS in the process industry (SIL 2 capable)
- NAMUR NE 43 — Standardization of the signal level for fault information from field devices
- HART Communication Foundation — HART 5/6/7 protocol compliance
- CE Marking — EMC Directive 2014/30/EU; Low Voltage Directive 2014/35/EU
- UL 508 — Industrial Control Equipment (UL Listed)
- FM Approved — Class I, Division 2 (with appropriate barriers)
- ATEX / IECEx — Zone 2 installation with certified Zener barriers or galvanic isolators
- RoHS Compliant — Directive 2011/65/EU
Quality Assurance & Sourcing
Konmask.com sources the 8C-PAOHA1 51454469-275 through verified industrial automation supply channels. Our quality assurance process includes:
- Authenticity Verification — Each unit is inspected against Honeywell OEM labeling, PCB revision markings, and firmware version records
- Functional Pre-Shipment Test — Modules are bench-tested for channel continuity, HART response, and backplane communication prior to dispatch
- Condition Grading — New surplus, refurbished, and used-tested grades available; condition clearly stated on each listing
- Traceability Documentation — Certificate of conformance and test report available upon request
- Packaging — ESD-safe anti-static bags, foam-lined cartons, and double-boxing for international shipments
- Warranty — 12-month warranty on all tested units; 90-day warranty on used-tested stock
How to Source This Part
Konmask.com maintains stock of the Honeywell 8C-PAOHA1 51454469-275 for immediate dispatch. To place an order or request a quotation:
- Online — Add to cart directly on this page; checkout supports T/T bank transfer, PayPal, and credit card
- Email RFQ — Send your purchase order or BOM to support@konmask.com with quantity, required delivery date, and destination port
- Phone / WhatsApp — Call or message +0086 19859288691 for urgent requirements or technical pre-sales consultation
- Lead Time — In-stock units ship within 1–3 business days; ex-stock international delivery 5–10 business days via DHL/FedEx
- Minimum Order — 1 unit; volume pricing available for orders of 5+ units
Application-Specific FAQ
Q: Is the 8C-PAOHA1 compatible with Experion PKS R400 and earlier?
A: The module is designed for C300 Series I/O and is fully supported from Experion R500 onward. Compatibility with R400 depends on firmware revision — contact us with your current system revision for confirmation.
Q: Can this module be used in a Safety Instrumented System (SIS)?
A: The 8C-PAOHA1 is SIL 2 capable when integrated with Honeywell Safety Manager per IEC 61511. It must not be used as a standalone SIS output without the full safety-rated architecture.
Q: Does each channel support individual HART communication simultaneously?
A: Yes. The module supports per-channel HART multiplexing, enabling simultaneous HART communication on all 8 channels without loop interruption.
Q: What termination assembly is required for HART-enabled wiring?
A: Use the 8C-TAOX22 HART-enabled termination assembly. The standard 8C-TAOX12 does not route HART signals to the field terminals.
Q: Can I hot-swap this module without shutting down the process?
A: Yes, when installed on a redundant I/O carrier with the C300 controller in redundant mode. The controller will hold last output values during the swap window (configurable, typically 30 seconds).
Q: Do you provide export documentation for international shipments?
A: Yes. We provide commercial invoice, packing list, certificate of origin, and ECCN classification documentation. HS Code 8537.10 applies for most jurisdictions.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


