Honeywell FS-QPP-0001 System Interconnection Cable for FTA | Replacement, Equivalent & Selection Guide
The Honeywell FS-QPP-0001 is a dedicated system interconnection cable designed to terminate on Field Termination Assemblies (FTAs) within the Honeywell Safety Manager (SM) platform. It provides reliable, noise-resistant signal routing between the Safety Manager controller and FTA marshalling panels, ensuring SIL-rated system integrity in process safety applications.
Technical Specifications
| Parameter | Details |
|---|---|
| Part Number | FS-QPP-0001 |
| Manufacturer | Honeywell Process Solutions |
| Series | Safety Manager (SM) / FSC Platform |
| Function | System Interconnection Cable terminating on FTAs |
| Termination Type | Field Termination Assembly (FTA) |
| Application | Safety Instrumented System (SIS) wiring |
| Weight (approx.) | 270 g |
| Compliance | IEC 61508 / SIL 2–3 compatible system |
| Condition Available | New, Refurbished, Tested |
Compatible Replacement & Equivalent Models
When the FS-QPP-0001 is unavailable or under evaluation, the following cables and accessories may serve as functional equivalents or alternatives depending on your FTA configuration:
| Model | Description | Compatibility Notes |
|---|---|---|
| FS-QPP-0002 | Extended-length system interconnection cable | Same FTA termination; verify cable length requirement |
| FS-QPP-0003 | Alternate routing variant | Check FTA slot assignment before substitution |
| FS-CABLE-FTA | Generic Honeywell FTA cable kit | May require pin-out verification |
| Custom Harness | Third-party fabricated cable | Must match Honeywell SM connector spec exactly |
Always verify connector type, pin count, and cable length against your Safety Manager system drawing before substitution.
Why Choose the Original FS-QPP-0001
- OEM-certified fit: Designed specifically for Honeywell Safety Manager FTA bays — no adapter or modification required.
- SIL system integrity: Maintains the SIL 2/3 loop integrity required by IEC 61508 when used within a certified SM configuration.
- Plug-and-play installation: Keyed connectors prevent mis-wiring during maintenance or replacement.
- Reduced commissioning risk: Eliminates field fabrication errors that can compromise safety function validation.
- Long-term availability: Sourced through authorized Honeywell distribution channels with full traceability.
Typical Applications
- Burner Management Systems (BMS) using Honeywell Safety Manager
- Emergency Shutdown (ESD) systems in oil & gas facilities
- High-integrity pressure protection systems (HIPPS)
- Chemical plant SIS marshalling cabinets
- Power generation safety interlock wiring
- Offshore platform process safety systems
System Compatibility
| Platform | Compatible | Notes |
|---|---|---|
| Honeywell Safety Manager SC | ✅ Yes | Primary target platform |
| Honeywell FSC (Fail-Safe Controller) | ✅ Yes | Verify FTA model number |
| Honeywell Safety Manager (Classic) | ✅ Yes | Check revision of FTA bay |
| Third-party SIS controllers | ⚠️ Conditional | Connector and pin-out must match |
| Honeywell Experion PKS (standard) | ❌ No | Different I/O architecture |
Selection Guide
Use the following criteria to confirm FS-QPP-0001 is the correct cable for your application:
- Identify your FTA model — Confirm the FTA part number installed in your Safety Manager cabinet (e.g., FS-TAI-0001, FS-TAO-0001).
- Check cable length — Measure the distance from the SM processor bay to the FTA marshalling panel; select the appropriate FS-QPP variant if length differs.
- Verify connector type — FS-QPP-0001 uses a specific keyed multi-pin connector; confirm it matches your FTA receptacle.
- Review system drawing — Cross-reference the Honeywell SM system wiring diagram (typically supplied with the engineering package).
- Confirm SIL loop requirements — If the loop is SIL 2 or SIL 3 rated, only use OEM-specified cables to maintain certification.
Quality Assurance & Sourcing
- All units sourced through verified industrial automation supply channels.
- Each cable inspected for connector integrity, shielding continuity, and labeling accuracy prior to shipment.
- Certificates of conformance (CoC) and test reports available upon request.
- Traceability documentation provided for SIL-critical procurement requirements.
- Konmask.com specializes in hard-to-find and long-lead Honeywell Safety Manager components.
How to Order
- Confirm part number: FS-QPP-0001
- Specify quantity and required delivery timeline.
- Request a quote via support@konmask.com or call +0086 19859288691.
- Provide your system drawing or FTA model number for cross-reference validation if needed.
- Receive order confirmation with lead time and shipping details.
Replacement & Compatibility FAQ
Q: Can I use a custom-fabricated cable instead of FS-QPP-0001?
A: Technically possible, but not recommended for SIL-certified loops. Custom cables must exactly replicate the OEM connector spec and shielding to maintain safety function integrity.
Q: Is FS-QPP-0001 compatible with all Honeywell FTA types?
A: It is designed for the Safety Manager FTA family. Always verify against your specific FTA part number and system revision.
Q: What is the lead time for FS-QPP-0001?
A: Lead time varies by stock availability. Contact Konmask for current inventory status and expedited options.
Q: Can FS-QPP-0002 replace FS-QPP-0001?
A: Only if the cable length and connector type match your installation. Consult your system drawing before substitution.
Q: Do you provide documentation for SIL procurement audits?
A: Yes. Konmask provides CoC, test reports, and sourcing traceability upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
