Honeywell SC-UCMX02 (51307195-276) UCN Controller Module | Replacement, Equivalent & Selection Guide
The Honeywell SC-UCMX02 (Part Number 51307195-276) is a Universal Control Network (UCN) Controller Module designed for use in Honeywell’s TDC 3000, PlantScape, and Experion PKS distributed control systems. As a critical communication and control interface, it manages UCN network traffic and coordinates data exchange between process controllers and the operator station. Konmask.com supplies genuine and compatible SC-UCMX02 modules with full traceability for industrial automation environments.
Technical Specifications
- Part Number: SC-UCMX02 / 51307195-276
- Manufacturer: Honeywell Process Solutions
- Series: Safety Manager / TDC 3000 / Experion PKS
- Module Type: UCN (Universal Control Network) Controller Module
- Network Interface: UCN Coaxial / Redundant UCN
- Communication Protocol: UCN proprietary (Honeywell)
- Power Supply: Supplied via backplane (5 VDC / 24 VDC)
- Operating Temperature: 0°C to 60°C (32°F to 140°F)
- Humidity: 5% to 95% non-condensing
- Weight: Approx. 340 g
- Form Factor: Single-slot card module
- Certifications: CE, UL (refer to original datasheet for full listing)
Compatible Replacement & Equivalent Models
The following models are functionally compatible or serve as direct/near-direct replacements for the SC-UCMX02 in supported Honeywell DCS architectures. Always verify firmware revision and backplane compatibility before substitution.
- 51307195-175 – Earlier revision of the same UCN Controller family; verify firmware compatibility
- 51307195-200 – Mid-series revision; compatible with TDC 3000 LCN/UCN configurations
- SC-UCMX01 – Single-redundancy variant; suitable where full redundancy is not required
- SC-UCMX03 – Enhanced revision with extended diagnostics; drop-in compatible in most racks
- 51401288-100 – UCN Interface Module (UCNIM); used in specific gateway configurations
- 51304485-100 (HPMM) – High-Performance Process Manager Module; alternative for process-intensive nodes
Note: Replacement compatibility depends on system firmware version, rack type, and network topology. Contact Konmask.com for a verified cross-reference.
Why Choose the Original SC-UCMX02
- Proven Reliability: Factory-tested and validated for Honeywell UCN environments with decades of field deployment history.
- Full Protocol Support: Native UCN protocol stack ensures zero-compromise communication integrity.
- Redundancy Ready: Supports hot-standby redundancy configurations critical for continuous process operations.
- Seamless Integration: Plug-and-play with existing TDC 3000, PlantScape, and Experion PKS cabinets without firmware re-engineering.
- Long Service Life: Designed for 24/7 industrial operation in harsh process environments.
Typical Applications
- Oil & Gas refining and upstream production control systems
- Chemical and petrochemical plant DCS networks
- Power generation and utilities automation
- Pulp & paper process control
- Pharmaceutical manufacturing (batch and continuous)
- Water treatment and municipal infrastructure
System Compatibility
- Honeywell TDC 3000 – LCN/UCN network nodes (PM, HPM, AM, NIM)
- Honeywell PlantScape – Legacy UCN-based controller cabinets
- Honeywell Experion PKS – C200/C300 migration paths with UCN legacy support
- Honeywell Safety Manager – Where UCN interface is required for SIS integration
Incompatible with: Experion LS, Experion Batch (standalone), or non-UCN Honeywell platforms without additional gateway hardware.
Selection Guide
Use the following criteria to confirm the SC-UCMX02 is the correct module for your application:
- Step 1 – Identify your DCS platform: Confirm you are running TDC 3000, PlantScape, or Experion PKS with UCN backbone.
- Step 2 – Check part number revision: The suffix -276 denotes a specific hardware/firmware revision. Cross-check with your system’s Bill of Materials (BOM).
- Step 3 – Verify rack slot type: SC-UCMX02 occupies a standard single-slot UCN card position. Confirm slot availability in your cabinet.
- Step 4 – Redundancy requirement: If your system requires dual UCN controllers, order two units and confirm redundancy pairing in your system configuration.
- Step 5 – Firmware alignment: Request the firmware revision label from Konmask.com to match your existing system version before installation.
Quality Assurance & Sourcing
- All SC-UCMX02 modules supplied by Konmask.com undergo visual inspection, functional verification, and anti-static packaging.
- Units are sourced from authorized distributors, decommissioned plant upgrades, or certified refurbishers with full chain-of-custody documentation.
- Certificates of conformance (CoC) and test reports available upon request.
- Lead time: In-stock units ship within 3–5 business days; sourced units within 2–4 weeks.
How to Order
- Part Number: SC-UCMX02 | Reference P/N: 51307195-276
- Minimum Order Quantity: 1 unit
- Packaging: Anti-static bag, foam-lined carton
- Payment: T/T, PayPal, credit card (contact for B2B terms)
- Shipping: DHL / FedEx / UPS worldwide; sea freight available for bulk orders
- Submit your inquiry via the product page or email support@konmask.com with your system details for a tailored quote.
Replacement & Compatibility FAQ
Q: Can SC-UCMX02 replace 51307195-175 directly?
A: In most cases yes, but firmware revision differences may require a system configuration update. Contact us for a compatibility check.
Q: Is the SC-UCMX02 compatible with Experion PKS R500 and above?
A: It is compatible in legacy UCN-connected nodes. Pure C300-based Experion systems do not use UCN and do not require this module.
Q: Do you supply tested/refurbished units?
A: Yes. All refurbished units are functionally tested and include a 90-day warranty. New surplus units carry original manufacturer warranty terms.
Q: What is the lead time for SC-UCMX02?
A: In-stock units ship within 3–5 business days. For sourced units, typical lead time is 2–4 weeks.
Q: Can I return a module if it is not compatible?
A: Yes, subject to our return policy. Please verify compatibility before installation. Contact support@konmask.com for assistance.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






