Metso IOP345 091124 Digital Input Module | Replacement, Equivalent & Selection Guide
The Metso IOP345 091124 is a Digital Input (DI) I/O module designed for use within Metso DNA / Metso Automation DCS platforms. It provides reliable discrete signal acquisition from field devices such as limit switches, proximity sensors, and push-buttons, making it a critical component in process automation and control systems across pulp & paper, power generation, and industrial manufacturing environments.
At Konmask.com, we specialize in sourcing, cross-referencing, and supplying original and compatible replacement modules for industrial automation systems worldwide.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | IOP345 091124 |
| Manufacturer | Metso Automation (Neles Controls) |
| Module Type | Digital Input (DI) Module |
| Platform | Metso DNA DCS / Metso Automation System |
| Signal Type | Discrete / Digital Input |
| Weight | 560 g |
| Condition Available | New, Refurbished, Tested |
| Warranty | 12 Months |
Compatible Replacement & Equivalent Models
If the IOP345 091124 is discontinued, long lead-time, or out of budget, the following models may serve as functional equivalents depending on your system configuration. Always verify firmware and backplane compatibility before substitution.
| Model | Brand | Type | Compatibility Notes |
|---|---|---|---|
| IOP345 091124 | Metso | Digital Input | Original OEM module |
| IOP346 (variant) | Metso | Digital Input | Check channel count & firmware rev |
| IC693MDL645 | GE Fanuc | Digital Input | Cross-platform; requires I/O adapter |
| 1756-IB16 | Allen-Bradley | Digital Input 24VDC | Different platform; engineering review needed |
| SM321 | Siemens S7-300 | Digital Input | Different platform; not plug-compatible |
Note: Cross-brand replacements require system engineering evaluation. Contact our team for a compatibility assessment.
Why Choose the Original Metso IOP345 091124
- Native DCS Integration – Plug-and-play with Metso DNA systems; no firmware patching required.
- Proven Field Reliability – Designed for continuous 24/7 industrial operation in harsh environments.
- OEM Signal Integrity – Maintains certified accuracy and diagnostic reporting within the Metso platform.
- Reduced Commissioning Risk – Eliminates compatibility unknowns associated with third-party substitutes.
- Full Diagnostic Support – Supports Metso DNA system-level fault diagnostics and health monitoring.
Typical Applications
- Pulp & paper mill process control (e.g., digester, bleaching, recovery boiler)
- Power plant auxiliary systems and boiler control
- Oil & gas upstream/downstream discrete signal monitoring
- Chemical plant safety interlock and ESD systems
- Water treatment plant pump and valve status monitoring
- General industrial DCS-based discrete I/O acquisition
System Compatibility
- Metso DNA – Full native compatibility (primary platform)
- Metso Automation / Neles Controls legacy systems – Compatible with appropriate backplane revision
- Third-party DCS platforms – Not directly compatible; requires gateway or I/O conversion hardware
Always confirm the system firmware version and I/O bus specification with your DCS engineer before ordering a replacement module.
Selection Guide
Use the following criteria to select the correct digital input module for your application:
- Channel Count – Verify the number of DI channels required (8, 16, or 32 ch variants may exist).
- Input Voltage Range – Confirm field device signal voltage (24VDC, 48VDC, 120VAC, etc.).
- Isolation Type – Optically isolated inputs preferred for noise-sensitive environments.
- Backplane Slot Type – Match the physical connector and bus protocol to your existing I/O rack.
- Firmware Revision – Ensure module firmware is compatible with your DCS controller version.
- Hazardous Area Rating – If installed in Zone 1/2 or Div 1/2, confirm ATEX/IECEx certification.
Quality Assurance & Sourcing
- All modules are inspected and tested prior to shipment.
- Original OEM units sourced from authorized distributors or decommissioned systems with full traceability.
- Refurbished units undergo full functional testing and cleaning to OEM standards.
- Certificate of conformance and test report available upon request.
- Secure anti-static packaging with shock-absorbing protection for international shipping.
How to Order
- Confirm your part number: IOP345 091124
- Specify required condition: New / Refurbished / Tested-Used
- Provide your DCS platform version and firmware revision if known
- Submit your inquiry via [email protected] or add to cart directly
- Receive quotation with lead time and shipping options within 24 hours
Replacement & Compatibility FAQ
Q: Can I replace IOP345 091124 with a different Metso DI module?
A: Possibly, if the channel count, voltage range, and backplane connector match. Contact us with your system details for a verified recommendation.
Q: Is a refurbished IOP345 091124 reliable for critical process control?
A: Yes, when properly tested and certified. Our refurbished units pass full functional testing and include a 12-month warranty.
Q: Can this module be used in a non-Metso DCS system?
A: Not directly. It is designed for the Metso DNA platform. Cross-platform use requires engineering evaluation and potentially a protocol gateway.
Q: What is the lead time for a new IOP345 091124?
A: Typically 3–10 business days for stock items. Contact us for current availability.
Q: Do you provide a datasheet or wiring diagram?
A: Yes. Request documentation via [email protected] after placing your inquiry.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
