Proface PFXSP5600WAD-PFXSP5B40 HMI Expansion Module | Replacement, Equivalent & Selection Guide
The Proface PFXSP5600WAD-PFXSP5B40 is a high-performance HMI expansion module from the Pro-face SP5000 Series, designed for demanding industrial automation environments. This combination unit pairs the PFXSP5600WAD display/logic unit with the PFXSP5B40 backplane/expansion base, delivering a modular, scalable human-machine interface solution for process control, machine automation, and SCADA integration.
At Konmask.com, we specialize in sourcing genuine, tested, and traceable Pro-face HMI modules for procurement engineers who require spec-accurate parts with verified provenance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Pro-face (Schneider Electric / Digital Electronics) |
| Part Number | PFXSP5600WAD-PFXSP5B40 |
| Main Unit | PFXSP5600WAD |
| Expansion Base | PFXSP5B40 |
| Series | SP5000 |
| Device Type | HMI Expansion Module / Backplane Unit |
| Display Interface | Compatible with SP5000 Series display units |
| Communication | Ethernet, RS-232C, RS-422/485, USB |
| Expansion Slots | Up to 4 (PFXSP5B40 backplane) |
| Power Supply | 24 VDC |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Protection Rating | IP65 (front panel) |
| Certifications | CE, UL, cUL |
| Weight | Approx. 1,600 g |
| Country of Origin | Japan |
Compatible Replacement & Equivalent Models
When the PFXSP5600WAD-PFXSP5B40 is discontinued or unavailable, the following models offer functional equivalence or direct replacement compatibility:
| Model | Type | Compatibility Notes |
|---|---|---|
| PFXSP5600TPD-PFXSP5B40 | Direct Replacement | Same SP5000 backplane, different display variant |
| PFXSP5600WAD-PFXSP5B00 | Equivalent | Smaller backplane, reduced expansion slots |
| PFXSP5600WAD-PFXSP5B80 | Upgrade | Larger backplane, 8-slot expansion |
| PFXSP5500WAD | Predecessor | SP5000 series, fewer I/O options |
| PFXGP4601TAD | Cross-series | GP4000 series, similar HMI functionality |
| Siemens KTP700 Basic | Cross-brand | Comparable panel size, different protocol stack |
Note: Always verify firmware version, communication protocol, and backplane slot count before substituting. Contact Konmask engineering support for compatibility confirmation.
Why Choose the Original Model
- Modular Architecture — PFXSP5B40 backplane supports up to 4 expansion cards, enabling flexible I/O and communication configurations without rewiring.
- Proven SP5000 Ecosystem — Seamlessly integrates with Pro-face GP-Pro EX software, existing SP5000 projects, and Schneider Electric automation platforms.
- IP65 Front Panel — Suitable for wash-down environments, food processing, and dusty industrial floors.
- Multi-Protocol Support — Native drivers for Mitsubishi, Omron, Siemens, Allen-Bradley, Modbus, and 2,800+ PLC/device protocols via GP-Pro EX.
- Long Service Life — Industrial-grade components rated for continuous 24/7 operation in harsh environments.
Typical Applications
- Automated production line HMI control panels
- Process monitoring in chemical, pharmaceutical, and food & beverage plants
- SCADA terminal integration in water treatment and energy facilities
- Machine tool operator interfaces (CNC, injection molding, packaging)
- Building automation and HVAC control systems
- Semiconductor and electronics manufacturing equipment
System Compatibility
| System / Platform | Compatibility |
|---|---|
| Pro-face GP-Pro EX Software | ✅ Full support |
| Mitsubishi MELSEC Series PLCs | ✅ Native driver |
| Omron CJ/CS/NJ Series | ✅ Native driver |
| Siemens S7-300/400/1200/1500 | ✅ Native driver |
| Allen-Bradley ControlLogix / MicroLogix | ✅ Native driver |
| Modbus RTU / TCP | ✅ Supported |
| EtherNet/IP | ✅ Supported |
| PROFIBUS DP (via expansion card) | ✅ With PFXSP5B40 slot |
Selection Guide
Use the following criteria to confirm the PFXSP5600WAD-PFXSP5B40 is the right choice for your application:
- ✅ Expansion Slots Required: Need 3–4 expansion I/O or communication cards → PFXSP5B40 (4-slot) is correct
- ✅ Display Type: WAD suffix = Wide-format display with analog touch; confirm panel cutout dimensions match your enclosure
- ✅ Power Input: Confirm 24 VDC supply availability at installation point
- ✅ Protocol: Verify target PLC brand and confirm GP-Pro EX driver availability
- ✅ Environment: IP65 front panel — suitable for most industrial floors; check rear-side ingress protection for enclosure design
- ⚠️ If fewer slots needed: Consider PFXSP5600WAD-PFXSP5B00 (2-slot) to reduce cost
- ⚠️ If more slots needed: Upgrade to PFXSP5600WAD-PFXSP5B80 (8-slot)
Quality Assurance & Sourcing
- Genuine Parts Only — All Pro-face modules sourced from authorized distributors or verified surplus channels with full traceability documentation.
- Pre-shipment Testing — Each unit undergoes power-on verification and communication port testing before dispatch.
- Authenticity Verification — Serial numbers cross-referenced against Pro-face manufacturer records where applicable.
- Packaging Integrity — ESD-safe packaging with anti-static bags, foam inserts, and tamper-evident sealing.
- Warranty — 90-day replacement warranty on all verified units; extended warranty available on request.
How to Order
- Confirm part number: PFXSP5600WAD-PFXSP5B40
- Specify quantity and required delivery timeline
- Submit RFQ via support@konmask.com or call +0086 19859288691
- Receive quotation within 24 business hours
- Confirm order — payment, shipping terms, and export documentation arranged
- Dispatch with tracking number and test report
Lead Time: In-stock units ship within 3–5 business days. Special-order items: 2–4 weeks.
Replacement & Compatibility FAQ
Q: Can PFXSP5600WAD-PFXSP5B40 replace an older PFXSP5500 series unit?
A: Functionally yes in most cases, but backplane dimensions and mounting holes may differ. Verify panel cutout and wiring harness compatibility before installation.
Q: Is the PFXSP5B40 backplane sold separately?
A: Yes. Contact us if you need only the backplane or only the PFXSP5600WAD display unit as individual components.
Q: What software is required to program this HMI?
A: Pro-face GP-Pro EX (version 4.0 or later recommended). License and installation support available upon request.
Q: Can this unit communicate with non-Pro-face PLCs?
A: Yes. GP-Pro EX supports 2,800+ device drivers including Mitsubishi, Omron, Siemens, Rockwell, Modbus, and EtherNet/IP.
Q: Do you provide a certificate of conformance (CoC)?
A: Yes, CoC and test reports are available for all verified units. Request at time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
