Digital Output Solution – Siemens 6ES7132-6BH01-0BA0 | ET 200SP Series
The Siemens 6ES7132-6BH01-0BA0 is a high-density digital output module for the SIMATIC ET 200SP distributed I/O system. Delivering 16 channels of 24V DC / 0.5A switching capability in a compact footprint, this module is the standard specification for machine builders and system integrators who require reliable, high-cycle actuator control at the field level.
Where This Product Is Used
This module is deployed wherever a SIMATIC ET 200SP station must drive 24V DC loads at the process level. Typical installation environments include:
- Automotive Assembly Lines — controlling pneumatic cylinders, solenoid valves, and indicator lamps across multi-station transfer lines
- Packaging Machinery — synchronised actuation of pushers, diverters, and reject gates in high-speed lines
- Conveyor & Material Handling Systems — driving motor starters, brake coils, and zone-control solenoids in warehouse logistics
- Food & Beverage Processing — hygienic-area panel builds where IP20 ET 200SP stations are mounted in stainless-steel enclosures
- Water & Wastewater Treatment — remote I/O stations on distributed pump and valve skids communicating via PROFINET
- Building Automation & HVAC — fan coil unit control, damper actuators, and lighting relay outputs in BMS panels
- Semiconductor & Electronics Manufacturing — cleanroom equipment requiring deterministic, low-latency output switching
Technical Specifications
| Parameter | Value |
|---|---|
| Article Number | 6ES7132-6BH01-0BA0 |
| Product Family | SIMATIC ET 200SP |
| Module Type | Digital Output (DQ) |
| Number of Outputs | 16 |
| Output Voltage | 24V DC |
| Output Current per Channel | 0.5 A |
| Total Current per Module | 4 A |
| Output Type | Source (P-switching) |
| Switching Frequency | Up to 100 Hz (resistive load) |
| Isolation | Optocoupler isolation between channels and backplane bus |
| Backplane Bus Interface | ET 200SP BaseUnit (BU-type) |
| Supply Voltage (Load) | 24V DC (via BaseUnit) |
| Dimensions (W × H × D) | 15 mm × 73 mm × 58 mm |
| Weight | Approx. 40 g |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | −40 °C to +70 °C |
| Degree of Protection | IP20 |
| Firmware | Configurable via TIA Portal V13 SP1 and above |
| Packing Unit | 1 piece (PU 1) |
Why Engineers Specify This Model
- Ultra-compact 15 mm pitch — the narrowest DQ16 module in the ET 200SP range, maximising channel density in space-constrained panels
- Standard (ST) variant — cost-optimised for the majority of machine I/O applications without sacrificing cycle-time performance
- Hot-swap capable — modules can be replaced under power when used with the appropriate BaseUnit, minimising unplanned downtime
- Seamless TIA Portal integration — full GSD/GSDML support; hardware configuration, diagnostics, and firmware updates managed from a single engineering environment
- Consistent Siemens ecosystem — direct compatibility with SIMATIC S7-1200, S7-1500, and ET 200SP CPU variants without gateway hardware
- Diagnostic capability — channel-level short-circuit and overload detection reported back to the CPU via PROFINET, enabling predictive maintenance workflows
Complete System Bill of Materials
A functional ET 200SP station using this output module requires the following components:
| Item | Siemens Article No. | Description |
|---|---|---|
| Interface Module | 6ES7155-6AU01-0BN0 | IM 155-6 PN ST — PROFINET interface module |
| BaseUnit (Light) | 6ES7193-6BP00-0BA0 | BU15-P16+A0+2B — BaseUnit for DQ modules, light version |
| Digital Output Module | 6ES7132-6BH01-0BA0 | DQ 16x 24V DC/0.5A ST (this item) |
| Server Module | 6ES7193-6PA00-0AA0 | Server module — terminates the ET 200SP station |
| Potential Distribution Module | 6ES7193-6AR00-0AA0 | Optional — for load voltage distribution across station |
| Labelling Strips | 6ES7193-6LB00-0AA0 | Optional — for I/O channel identification |
Compliance & Industry Standards
- CE Marking — compliant with EU Low Voltage Directive and EMC Directive
- UL / cUL Listed — recognised for use in North American industrial control panels
- IEC 61131-2 — programmable controller I/O module standard
- PROFINET IO — IEC 61158 / IEC 61784 conformant fieldbus communication
- RoHS Compliant — restriction of hazardous substances per EU Directive 2011/65/EU
- ATEX / IECEx — consult Siemens documentation for zone-specific approvals when used in hazardous areas
Quality Assurance & Sourcing
Konmask.com sources automation components through authorised distribution channels and verified industrial surplus networks. Every unit offered is subject to the following quality process:
- Visual inspection for physical damage, label integrity, and original Siemens holographic authenticity markings
- Firmware version verification against Siemens published release notes
- Functional power-on test where test equipment is available
- Anti-static packaging with humidity indicator card for transit protection
- Batch traceability records retained for a minimum of 24 months
All products are shipped with original manufacturer documentation where available. Certificates of conformity and test reports can be provided upon request for project procurement.
How to Source This Part
- Add to Cart — select quantity and proceed to checkout directly on this page
- Request a Quote — for orders of 5 units or more, contact us for volume pricing and lead-time confirmation
- Provide Your BOM — send your full project bill of materials to support@konmask.com and we will respond with a consolidated quotation within 1 business day
- Urgent Requirements — call or WhatsApp +0086 19859288691 for same-day stock confirmation and expedited dispatch options
Application-Specific FAQ
Q: Can this module replace the older 6ES7132-6BH00-0BA0?
A: Yes. The -0BA0 hardware revision is backward-compatible with the -0AA0 predecessor. No TIA Portal project changes are required beyond a hardware update in the device configuration.
Q: What BaseUnit must be used with this module?
A: This module requires a BU-type BaseUnit with P-bus connection. The standard pairing is the 6ES7193-6BP00-0BA0 (BU15-P16+A0+2B). Light-coloured BaseUnits indicate a new potential group; dark-coloured units continue the existing potential group.
Q: Is this module suitable for safety (SIL/PLe) applications?
A: No. The ST (Standard) variant does not carry functional safety certification. For safety-rated outputs, specify the F-DQ variant (e.g., 6ES7136-6DC00-0CA0) and a corresponding F-capable interface module.
Q: What is the maximum cable length from the module to the field device?
A: Siemens specifies a maximum of 600 m for unshielded cables and 1000 m for shielded cables to 24V DC actuators, subject to voltage drop calculations for the load current.
Q: Can I mix DI and DQ modules on the same ET 200SP station?
A: Yes. ET 200SP supports mixed I/O configurations. Module sequence is defined in TIA Portal and downloaded to the interface module; physical slot order must match the configured order.
Q: What diagnostics are available?
A: The module reports short-circuit and overload conditions on a per-channel basis. Diagnostic alarms are forwarded to the CPU via PROFINET and can be evaluated in the user program using OB82 or equivalent diagnostic organisation blocks.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691




