Process Automation Power Solution – YOKOGAWA SPW484-50 | Centum VP / CS 3000 Series
Where This Product Is Used
The YOKOGAWA SPW484-50 is a dedicated power supply module engineered for mission-critical distributed control system (DCS) environments. It is widely deployed in:
- Oil & Gas Refineries – Powering field controller stations and I/O bus segments in upstream/downstream process units
- Chemical & Petrochemical Plants – Sustaining 24/7 continuous process control loops where power interruption is unacceptable
- Pulp & Paper Mills – Supplying stable DC power to Centum VP field control units across large-scale production lines
- Power Generation Facilities – Integrated into turbine control and boiler management DCS cabinets
- Pharmaceutical Manufacturing – Supporting GMP-compliant automation systems requiring validated, stable power rails
- Water & Wastewater Treatment – Deployed in SCADA-linked DCS panels for pump and valve control
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | SPW484-50 |
| Manufacturer | YOKOGAWA Electric Corporation |
| Series | Centum VP / CS 3000 |
| Module Type | Power Supply Module |
| Output Voltage | 48 V DC |
| Output Current | 50 A (nominal) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Redundancy Support | Yes – N+1 redundant configuration |
| Mounting | DIN rail / cabinet rack mount |
| Weight | 2,140 g |
| Operating Temperature | 0°C to 55°C |
| Humidity | 5% to 95% RH (non-condensing) |
| Protection Class | IP20 |
| Certifications | CE, UL, cUL |
Why Engineers Specify This Model
- OEM-Exact Replacement – Drop-in compatible with existing Centum VP and CS 3000 power bus architecture; no firmware reconfiguration required
- Redundant Power Architecture – Supports hot-standby N+1 redundancy, eliminating single points of failure in critical control loops
- Wide AC Input Range – Accepts 100–240 V AC globally, simplifying deployment across international plant sites
- Stable 48 V DC Rail – Delivers clean, regulated output with low ripple, protecting sensitive I/O modules and field instruments
- Proven MTBF – YOKOGAWA’s industrial-grade components ensure long service life in harsh plant environments
- Compact Form Factor – Optimized for high-density DCS cabinet layouts without compromising thermal performance
Complete System Bill of Materials
For a fully redundant Centum VP power subsystem, engineers typically specify:
- 2× SPW484-50 Power Supply Modules (N+1 redundancy)
- 1× YOKOGAWA Power Distribution Unit (PDU) compatible with Centum VP bus
- 1× Field Control Unit (FCU) – e.g., AFV10D or AFV30D
- I/O Modules – AAI141, AAI841, ADV151, or equivalent per signal type
- 1× Communication Bus Cable Set (RIO bus or ESB bus)
- Cabinet grounding kit and DIN rail mounting hardware
Compliance & Industry Standards
- CE Marking – Compliant with EU Low Voltage Directive and EMC Directive
- UL / cUL Listed – Recognized for use in North American industrial installations
- IEC 61131-2 – Meets programmable controller power supply requirements
- IEC 61000-4 Series – EMC immunity tested (ESD, EFT, surge, conducted RF)
- RoHS Compliant – Restriction of Hazardous Substances directive compliant
- YOKOGAWA Factory Acceptance Test (FAT) – Each unit undergoes OEM burn-in and functional verification
Quality Assurance & Sourcing
At Konmask.com, every YOKOGAWA SPW484-50 unit is:
- Sourced directly from authorized YOKOGAWA distributors or verified industrial surplus channels
- Inspected for physical integrity, label authenticity, and connector condition prior to listing
- Stored in ESD-safe, climate-controlled warehousing to preserve module integrity
- Shipped with original packaging where available, or equivalent anti-static protective packaging
- Backed by Konmask’s 90-day functional warranty on all tested units
How to Source This Part
Need the SPW484-50 urgently for a plant shutdown or emergency replacement? Konmask.com maintains ready stock of YOKOGAWA DCS components for rapid dispatch.
- Request a Quote: Email support@konmask.com with your PO or project reference
- Phone / WhatsApp: +0086 19859288691 (Mon–Sat, 09:00–18:00 CST)
- Bulk Orders: Volume pricing available for MRO procurement teams and EPC contractors
- Lead Time: In-stock units ship within 1–3 business days; ex-stock international DHL/FedEx available
Application-Specific FAQ
Q: Is the SPW484-50 compatible with both Centum VP and CS 3000 systems?
A: Yes. The SPW484-50 is designed for the Centum VP platform and is backward-compatible with CS 3000 power bus configurations in most cabinet layouts. Verify your cabinet revision with YOKOGAWA documentation before installation.
Q: Can I run two SPW484-50 modules in parallel for redundancy?
A: Yes. The module supports N+1 hot-standby redundancy. In the event of a primary module failure, the standby unit assumes load without interrupting the control system.
Q: What is the expected service life of this module?
A: YOKOGAWA rates industrial power supply modules for 10+ years MTBF under normal operating conditions (25°C, rated load). Actual life depends on ambient temperature, load factor, and maintenance schedule.
Q: Do you provide a test report or inspection certificate?
A: Yes. Konmask can provide a pre-shipment inspection report upon request. Contact us before placing your order to arrange documentation.
Q: Can this module be used outside of YOKOGAWA DCS systems?
A: The SPW484-50 is optimized for YOKOGAWA Centum VP/CS 3000 bus architecture. Use in third-party systems is not recommended without consulting a qualified automation engineer.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
