YOKOGAWA SPW484-13 Power Supply Module | Replacement, Equivalent & Selection Guide
The YOKOGAWA SPW484-13 is a redundant-capable DC power supply module designed for the CENTUM VP and CS 3000 distributed control systems (DCS). It delivers stable, regulated power to field control stations (FCS) and I/O modules, ensuring continuous process operation in demanding industrial environments. This page serves as a comprehensive selection, replacement, and compatibility reference for procurement engineers and automation specialists.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | SPW484-13 |
| Manufacturer | YOKOGAWA Electric Corporation |
| Series | CENTUM VP / CS 3000 |
| Module Type | Power Supply Module |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Output Voltage | 24 V DC |
| Redundancy | Supports 1:1 redundant configuration |
| Mounting | DIN rail / rack-mount (CENTUM VP nest) |
| Weight | 2,140 g (approx.) |
| Operating Temperature | 0 °C to 55 °C |
| Certifications | CE, UL (refer to YOKOGAWA datasheet for full listing) |
| Country of Origin | Japan |
Compatible Replacement & Equivalent Models
When the SPW484-13 is unavailable or end-of-life, the following models may serve as functional replacements or equivalents. Always verify electrical ratings, firmware compatibility, and mechanical fit before substitution.
| Model | Brand | Compatibility Notes |
|---|---|---|
| SPW484-11 | YOKOGAWA | Earlier revision; same form factor, verify firmware |
| SPW484-12 | YOKOGAWA | Intermediate revision; functionally equivalent |
| SPW481 | YOKOGAWA | CS 3000 series predecessor; check nest compatibility |
| SPW482 | YOKOGAWA | Alternative output rating; confirm load requirements |
| SPW483 | YOKOGAWA | Verify redundancy wiring before swap |
Note: Third-party or generic replacements are not recommended for safety-critical DCS applications. Contact Konmask for OEM-sourced alternatives.
Why Choose the Original SPW484-13
- Guaranteed compatibility — factory-validated for CENTUM VP and CS 3000 nests with no firmware conflicts.
- Redundancy support — seamless 1:1 hot-standby operation without additional configuration.
- Long service life — YOKOGAWA industrial-grade components rated for continuous 24/7 operation.
- Regulatory compliance — meets CE and UL requirements for process industries.
- OEM traceability — full documentation and serial number traceability for audit and maintenance records.
Typical Applications
- Oil & gas refinery DCS power distribution
- Chemical plant field control station (FCS) power supply
- Power generation plant automation systems
- Pharmaceutical batch control systems
- Pulp & paper process control infrastructure
- Water treatment and utilities automation
System Compatibility
- YOKOGAWA CENTUM VP — R5.03 and later (confirm with YOKOGAWA release notes)
- YOKOGAWA CS 3000 — R3.xx series field control stations
- Nest types — AFV10D, AFV20D, and compatible CENTUM VP I/O nests
- Redundancy pairing — pair with a second SPW484-13 for 1:1 redundant power
Always cross-reference the YOKOGAWA hardware compatibility matrix or contact Konmask technical support before installation.
Selection Guide
Use the following decision criteria to confirm the SPW484-13 is the correct module for your application:
- Step 1 — Confirm DCS platform: Verify your system is CENTUM VP or CS 3000. Other YOKOGAWA platforms (STARDOM, ProSafe-RS) use different power modules.
- Step 2 — Check input voltage: Confirm site power is 100–240 V AC. For 24 V DC input sites, a different SPW variant is required.
- Step 3 — Assess redundancy requirement: If your FCS requires redundant power, order two units and configure per YOKOGAWA wiring guidelines.
- Step 4 — Verify nest slot: Confirm the power supply slot in your nest is designated for the SPW484 series.
- Step 5 — Check revision: SPW484-13 is the current revision. If your system documentation specifies an earlier revision, contact Konmask to confirm interchangeability.
Quality Assurance & Sourcing
- All units sourced from authorized YOKOGAWA distributors or verified OEM channels.
- Pre-shipment functional inspection and packaging integrity check.
- Original manufacturer labeling, serial numbers, and documentation preserved.
- Anti-static packaging for safe international shipping.
- Konmask maintains traceability records for every unit sold.
How to Order
- Add the YOKOGAWA SPW484-13 to your cart and proceed to checkout, or
- Contact us directly for bulk orders, lead time confirmation, or export documentation:
📧 [email protected]
📞 +0086 19859288691 - Provide your DCS system model and revision for compatibility verification if required.
- Request a proforma invoice or commercial invoice for customs clearance.
Replacement & Compatibility FAQ
Q: Can the SPW484-13 replace an SPW484-11 or SPW484-12?
A: In most cases yes — the -13 is the latest revision and is backward-compatible with earlier -11 and -12 revisions. Confirm with YOKOGAWA release notes for your specific FCS firmware version.
Q: Is the SPW484-13 compatible with CENTUM CS 1000?
A: No. CS 1000 uses a different power module family. Contact Konmask for the correct CS 1000 power supply.
Q: Can I use a third-party power supply as a replacement?
A: Not recommended for safety-critical DCS applications. Non-OEM modules may void YOKOGAWA support agreements and introduce reliability risks.
Q: What is the lead time for the SPW484-13?
A: Typically 3–15 business days depending on stock. Contact us for real-time availability.
Q: Do you provide a warranty?
A: Yes. Konmask provides a 90-day functional warranty on all modules. OEM warranty terms apply where applicable.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
