ABB AINP-01C 64530267D Input Bridge Controller | Replacement, Equivalent & Selection Guide
The ABB AINP-01C (Part No. 64530267D) is an Input Bridge Controller module designed for ABB industrial drive and automation systems. This page provides a comprehensive technical reference, compatible replacement options, and a structured selection guide to help engineers and procurement teams make informed sourcing decisions.
Technical Specifications
- Manufacturer: ABB
- Model / Part Number: AINP-01C
- Reference Number: 64530267D
- Module Type: Input Bridge Controller
- Product Category: PLC / Drive Auxiliary Module
- Weight: Approx. 100 g
- Condition Available: New, Refurbished, Tested Used
- Compliance: CE / RoHS (verify with datasheet for specific revision)
Note: For full electrical ratings (voltage, current, I/O count, communication protocol), please refer to the official ABB AINP-01C datasheet or contact our technical team.
Compatible Replacement & Equivalent Models
When the original AINP-01C is unavailable or discontinued, the following models may serve as functional equivalents or drop-in replacements depending on your system configuration. Always verify compatibility with your drive firmware version before substitution.
- ABB AINP-01C (alternate revision codes): 64530267A / 64530267B / 64530267C — same functional block, minor PCB revisions
- ABB AINP-02C: Enhanced input bridge variant; check I/O mapping compatibility
- ABB RDIO-01C: Digital I/O extension module — applicable in some bridge input configurations
- ABB AIMA-01C: Analog input module — may substitute in signal-conditioning roles
- Third-party equivalents: Contact Konmask for cross-reference to compatible OEM-grade alternatives
Disclaimer: Replacement suitability depends on drive model, firmware, and application. Konmask technical advisors can assist with compatibility verification.
Why Choose the Original Model
- Guaranteed compatibility: Factory-matched to ABB ACS / DCS drive families without firmware modification
- Validated signal integrity: Precision-calibrated input bridge circuitry for accurate process feedback
- Long service life: Industrial-grade components rated for continuous duty in harsh environments
- OEM support: Eligible for ABB warranty and technical support when sourced through authorized channels
- Reduced commissioning risk: Plug-and-play replacement with no parameter re-mapping required
Typical Applications
- ABB ACS series variable frequency drive (VFD) input signal conditioning
- DCS distributed control system I/O bridge interfacing
- Motor control center (MCC) feedback loop integration
- Process automation in oil & gas, power generation, and water treatment plants
- Conveyor, pump, and compressor drive systems requiring precise input monitoring
System Compatibility
The AINP-01C is primarily designed for use within the following ABB drive and control platforms:
- ABB ACS 600 / ACS 800 / ACS 880 series drives
- ABB DCS 400 / DCS 600 DC drive systems
- ABB Advant / AC 800M control systems (as auxiliary I/O)
- Third-party systems with compatible 24 VDC I/O bus architecture (verify signal levels)
Always confirm compatibility by cross-referencing the drive’s hardware manual and the AINP-01C installation guide.
Selection Guide
Use the following decision framework to determine whether the AINP-01C is the right module for your application:
- Step 1 – Identify your drive model: Confirm the ABB drive series (ACS 600/800/880 or DCS 400/600) and firmware version.
- Step 2 – Check slot/bus type: Verify the module slot type (RDCO, RMIO, or option slot) matches AINP-01C’s form factor.
- Step 3 – Define I/O requirements: Confirm the number and type of input signals (analog/digital) required by your process.
- Step 4 – Assess environment: Confirm operating temperature, humidity, and vibration ratings meet your installation conditions.
- Step 5 – Evaluate alternatives: If AINP-01C is unavailable, use the replacement table above and consult Konmask for cross-reference support.
- Step 6 – Request a quote: Contact Konmask with your drive model, serial number, and required quantity for a tailored sourcing proposal.
Quality Assurance & Sourcing
- Source verification: All modules are sourced from authorized distributors, OEM surplus, or certified refurbishers
- Inspection protocol: Each unit undergoes visual inspection, functional bench testing, and ESD-safe packaging
- Traceability: Batch records and supplier documentation available upon request for regulated industries
- Warranty: 90-day replacement warranty on all tested units; new OEM units carry manufacturer warranty
- Anti-counterfeit: Konmask does not knowingly source or sell counterfeit components — all units are verified against OEM markings
How to Order
- Online: Add to cart directly from this page and complete checkout
- Email RFQ: Send your BOM or part list to support@konmask.com
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 9:00–18:00 CST)
- Bulk / B2B orders: Request a formal quotation with lead time, packaging, and shipping terms
- Lead time: In-stock units ship within 1–3 business days; sourced units typically 5–15 business days
Replacement & Compatibility FAQ
Q: Can AINP-01C replace AINP-01B directly?
A: In most cases yes, as the -01C revision is backward compatible with -01B slots. Verify with your drive’s hardware manual.
Q: Is a refurbished AINP-01C reliable for production use?
A: Konmask-tested refurbished units are bench-verified and carry a 90-day warranty, making them suitable for non-critical and maintenance applications. For safety-critical systems, we recommend new OEM units.
Q: Do you provide a certificate of conformance (CoC)?
A: Yes, CoC and test reports are available upon request for B2B and regulated industry orders.
Q: What if my drive model is not listed in the compatibility table?
A: Contact our technical team with your drive model and serial number — we will verify compatibility before shipment.
Q: Can you source the AINP-01C if it is not currently in stock?
A: Yes. Konmask maintains an active sourcing network for obsolete and hard-to-find ABB modules. Submit an RFQ and we will provide availability and lead time within 24 hours.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
