AEREVB 211QS10540C Vibration Sensor | Replacement, Equivalent & Selection Guide
The AEREVB 211QS10540C is an industrial-grade piezoelectric vibration sensor designed for continuous machine health monitoring, predictive maintenance, and condition-based monitoring systems. Sourced and verified by Konmask.com, this module is suitable for OEM integration and direct replacement in existing automation architectures.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 211QS10540C |
| Brand / Manufacturer | AEREVB |
| Sensor Type | Piezoelectric Vibration Sensor |
| Measurement Range | 0–50 g (typical) |
| Frequency Response | 2 Hz – 10 kHz |
| Output Signal | Analog voltage / 4–20 mA (model-dependent) |
| Supply Voltage | 18–30 VDC |
| Operating Temperature | -40°C to +85°C |
| Protection Rating | IP67 |
| Connector | M12 4-pin |
| Weight | 750 g (with cable assembly) |
| Certifications | CE, RoHS |
Note: Confirm exact specifications against the official AEREVB datasheet before installation.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional equivalents or drop-in replacements for the AEREVB 211QS10540C. Always verify electrical and mechanical compatibility before substitution:
- SKF CMSS 2200 – Industrial accelerometer, similar frequency range and M12 connector
- Emerson CSI 430 – 4–20 mA output vibration transmitter, compatible mounting pattern
- Hansford Sensors HS-100 – General-purpose industrial accelerometer, IP67 rated
- PCB Piezotronics 603C01 – High-sensitivity ICP® accelerometer for OEM integration
- Wilcoxon Research 786A – Low-frequency vibration sensor for slow-speed machinery
- Brüel & Kjær Type 4507 – Precision MEMS accelerometer for lab and field use
Contact support@konmask.com for cross-reference verification and compatibility confirmation.
Why Choose the Original Model
- Factory-calibrated – Each unit ships with a calibration certificate traceable to NIST standards
- Proven field reliability – Validated in heavy industrial environments including steel mills, paper mills, and compressor stations
- OEM-matched performance – Ensures system integrity when replacing in-service units without re-tuning alarm thresholds
- Long-term availability – Konmask maintains stock continuity for MRO and capital project procurement
Typical Applications
- Rotating machinery health monitoring (motors, pumps, fans, compressors)
- Predictive maintenance (PdM) and condition monitoring systems
- Vibration alarm and shutdown systems on critical assets
- OEM integration into machine tool spindles and gearboxes
- Structural health monitoring in civil and industrial infrastructure
- Quality control vibration testing on production lines
System Compatibility
The AEREVB 211QS10540C integrates with major industrial monitoring platforms and PLC/DCS systems, including:
- Siemens SIMATIC S7-300/400/1500 – Via analog input modules (SM 331/AI)
- Rockwell Allen-Bradley ControlLogix / CompactLogix – 4–20 mA analog input cards
- Emerson DeltaV / Ovation DCS – Direct wiring to AI field cards
- Honeywell Experion PKS – Compatible with standard analog input termination assemblies
- ABB System 800xA – Supported via S800 I/O analog input modules
- Vibration monitoring systems: Emerson AMS 2140, SKF @ptitude, Pruftechnik VIBSCANNER
Selection Guide
Use the following criteria to confirm the AEREVB 211QS10540C is the right sensor for your application:
- Frequency range: Suitable for rotating equipment operating at 120–60,000 RPM
- Measurement axis: Single-axis; specify triaxial variant if multi-axis measurement is required
- Output type: Confirm 4–20 mA or voltage output matches your data acquisition system
- Mounting: Stud mount (standard); adhesive or magnetic base adapters available separately
- Environment: IP67 rated — suitable for washdown, outdoor, and high-humidity environments
- Temperature: Verify process temperature does not exceed +85°C at the sensor mounting point
Not sure which model fits your system? Email support@konmask.com with your equipment nameplate data and monitoring system model for a free selection recommendation.
Quality Assurance & Sourcing
- All units sourced through authorized distribution channels or verified OEM supply chains
- 100% incoming inspection: visual, dimensional, and functional verification
- Calibration certificate included with each shipment
- Traceability documentation available upon request (COC, test reports)
- Anti-counterfeit verification available for critical applications
How to Order
- Part Number: 211QS10540C
- Brand: AEREVB
- Lead Time: In-stock items ship within 1–3 business days; contact us for bulk order scheduling
- Minimum Order: 1 unit
- Payment: T/T, PayPal, credit card, and trade finance options available
- Shipping: DHL / FedEx / UPS express worldwide; sea freight for bulk orders
- Quote Request: support@konmask.com | +0086 19859288691
Replacement & Compatibility FAQ
Q: Can the 211QS10540C replace my existing SKF CMSS 2200 directly?
A: In most cases yes, provided the output signal type and connector pinout match. Contact us for a detailed cross-reference check.
Q: Is a calibration certificate included?
A: Yes. Every unit ships with a factory calibration certificate. NIST-traceable calibration is available on request.
Q: What is the warranty period?
A: 12 months from date of shipment against manufacturing defects under normal operating conditions.
Q: Do you supply in bulk for MRO contracts?
A: Yes. We support blanket orders, consignment stock, and annual supply agreements. Contact our sales team for pricing.
Q: Can I get a sample unit for testing before committing to a large order?
A: Sample units are available for qualified projects. Please contact us with your application details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
