Allen-Bradley 80026-044-02 Medium Voltage SMC Flex Motor Controller | Replacement, Equivalent & Selection Guide
The Allen-Bradley 80026-044-02 is a Medium Voltage SMC Flex Motor Controller manufactured by Rockwell Automation. Designed for demanding industrial motor control applications, this unit delivers reliable soft-start and soft-stop functionality for medium-voltage AC motors. Konmask.com supplies genuine, tested, and sourced units with full traceability.
Technical Specifications
- Part Number: 80026-044-02
- Brand: Allen-Bradley / Rockwell Automation
- Series: SMC Flex
- Type: Medium Voltage Motor Controller
- Function: Soft-Start / Soft-Stop Motor Control
- Voltage Class: Medium Voltage
- Weight: 280 g (approx.)
- Condition: New / Surplus / Refurbished (specify on inquiry)
Compatible Replacement & Equivalent Models
If the 80026-044-02 is discontinued or on extended lead time, the following Allen-Bradley SMC Flex models may serve as functional equivalents or replacements depending on your application voltage, current rating, and control requirements:
- Allen-Bradley 150-C85NBD — SMC-3 Soft Starter (lower voltage class alternative)
- Allen-Bradley 150-F135NBD — SMC Flex Full-Voltage Soft Starter
- Allen-Bradley 150-F201NBD — SMC Flex Higher-Current Variant
- Allen-Bradley 150-F251NBD — SMC Flex Extended Range
- Siemens 3RW4455-6BC44 — Cross-brand medium voltage soft starter equivalent
- ABB PST300-600-70 — Alternative medium voltage soft starter
Note: Always verify voltage class, current rating, and communication protocol compatibility before substituting. Contact Konmask.com for a verified cross-reference.
Why Choose the Original 80026-044-02
- Factory-engineered for Allen-Bradley SMC Flex medium voltage drive systems
- Seamless integration with Rockwell Automation control architectures (Studio 5000, RSLogix)
- Proven reliability in heavy industrial environments: mining, oil & gas, water treatment, cement
- Full parameter compatibility — no re-engineering of existing control programs required
- Supported by Rockwell Automation global service network
Typical Applications
- Medium voltage pump and compressor motor control
- Conveyor and crusher drive systems
- HVAC large fan and blower applications
- Water and wastewater treatment plant motor starters
- Mining and mineral processing equipment
- Oil & gas upstream and downstream motor control panels
System Compatibility
- PLC Integration: Compatible with Allen-Bradley ControlLogix, CompactLogix, and MicroLogix platforms via DeviceNet or hardwired I/O
- SCADA/DCS: Integrates with Rockwell FactoryTalk, Wonderware, and third-party SCADA systems
- Communication: DeviceNet, Remote I/O (verify with specific firmware revision)
- Motor Types: Standard squirrel-cage induction motors, medium voltage class
Selection Guide
When selecting a motor controller for your application, consider the following parameters:
- Motor Voltage: Confirm medium voltage rating matches your motor nameplate (e.g., 2.3 kV, 4.16 kV, 6.6 kV)
- Full Load Current (FLA): Match controller current rating to motor FLA with appropriate service factor
- Starting Method: Soft-start vs. across-the-line vs. VFD — SMC Flex is optimized for soft-start duty
- Control Voltage: Verify 120 VAC or 24 VDC control circuit compatibility
- Communication Protocol: DeviceNet, EtherNet/IP, or hardwired — confirm with your PLC architecture
- Environment: Enclosure type (NEMA 1, 12, 4X) and ambient temperature rating
- Bypass Requirement: Determine if a mechanical bypass contactor is required for your application
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Pre-shipment inspection: visual, label verification, and functional check where applicable
- Anti-counterfeit measures: hologram labels, serial number traceability
- Packaging: original OEM packaging or equivalent ESD-safe protective packaging
- Warranty: 12-month warranty against manufacturing defects (terms apply)
- Export compliance: ECCN classification and export documentation available on request
How to Order
- Step 1: Confirm part number 80026-044-02 against your existing equipment nameplate or BOM
- Step 2: Specify required condition: New, Surplus New, or Refurbished
- Step 3: Submit your RFQ via the product page or email support@konmask.com
- Step 4: Receive quote with lead time, pricing, and shipping options within 24 hours
- Step 5: Confirm order and receive tracking information upon dispatch
For urgent requirements or large quantity orders, call us directly: +0086 19859288691
Replacement & Compatibility FAQ
Q: Is the 80026-044-02 still in production?
A: This part may be on limited availability or superseded. Contact Konmask.com to confirm current stock and lead time.
Q: Can I use a 150-series SMC-3 as a direct replacement?
A: The SMC-3 (150-series) is a low-voltage soft starter and is NOT a direct replacement for medium voltage SMC Flex units. Voltage class must match.
Q: Do you provide a certificate of conformance (CoC)?
A: Yes. CoC, test reports, and country of origin documentation are available upon request.
Q: What is the lead time for the 80026-044-02?
A: Lead time varies by stock availability. In-stock units ship within 3–5 business days. Contact us for current availability.
Q: Can Konmask.com assist with cross-referencing to another brand?
A: Yes. Our engineering team can provide verified cross-references to Siemens, ABB, Schneider, and other brands based on your motor and system specifications.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
