Rotating Machinery Vibration Monitoring Solution – Bently Nevada 190501-13-00-01 | Velomitor CT Series
Where This Product Is Used
The Bently Nevada 190501-13-00-01 Velomitor CT is a high-output piezoelectric velocity transducer engineered for continuous vibration monitoring on rotating machinery in demanding industrial environments. Typical deployment sites include:
- Steam & Gas Turbines – Bearing housing vibration surveillance on power generation turbines (50 Hz / 60 Hz utility plants)
- Centrifugal Compressors – Casing vibration measurement on pipeline and process-gas compressors per API 670
- Pumps & Fans – Absolute casing velocity monitoring on large BFW pumps, cooling-tower fans, and induced-draft fans
- Gearboxes – High-frequency structural vibration detection on parallel-shaft and epicyclic gearboxes
- Electric Motors – Bearing-cap vibration trending on HV induction motors (>500 kW)
- Reciprocating Compressors – Frame vibration monitoring as a complement to proximity probe systems
- Marine Propulsion – Shaft-line and gearbox vibration on diesel-electric vessels
The Velomitor CT is the preferred drop-in replacement for traditional geophone-type velocity sensors, offering superior high-frequency response, no moving parts, and direct compatibility with Bently Nevada 3500 Series rack monitors.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 190501-13-00-01 |
| Series | Velomitor CT (Piezoelectric Velocity Transducer) |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Sensing Element | Piezoelectric crystal (no moving parts) |
| Measurement Type | Absolute casing velocity (mm/s or in/s) |
| Sensitivity | 100 mV/in/s (4 mV/mm/s) ±5% |
| Frequency Range | 2 Hz – 2,000 Hz (±3 dB) |
| Amplitude Range | 0 – 50 in/s peak (0 – 1,270 mm/s peak) |
| Resonant Frequency | ≥ 22 kHz |
| Bias Voltage | 10 – 24 VDC (IEPE / ICP® compatible) |
| Output Impedance | < 100 Ω |
| Operating Temperature | −40 °C to +121 °C (−40 °F to +250 °F) |
| Connector | 2-pin MIL-C-5015 (per suffix -01) |
| Housing Material | 316 Stainless Steel |
| Ingress Protection | IP67 |
| Weight | ~320 g |
| Mounting | 1/4-28 UNF stud or magnetic base adapter |
Why Engineers Specify This Model
- No Moving Parts – Piezoelectric design eliminates the mechanical wear and resonance issues inherent in geophone-type sensors, delivering consistent accuracy over a 10+ year service life.
- Wide Frequency Bandwidth – 2–2,000 Hz coverage captures both low-speed imbalance (sub-10 Hz) and high-frequency gear-mesh or blade-pass events in a single sensor.
- Direct 3500 Rack Compatibility – Plug-and-play integration with Bently Nevada 3500/42M Velocity Monitor cards; no signal conditioning adapters required.
- Harsh Environment Rated – IP67 sealing and 316 SS housing withstand steam, oil mist, and washdown environments common in petrochemical and power plants.
- API 670 Compliant – Meets the machinery protection standard for casing vibration measurement, satisfying EPC contractor and insurance requirements.
- IEPE / ICP® Signal Protocol – Compatible with virtually all modern DCS, PLC, and condition monitoring systems via standard 4–20 mA or voltage output transmitters.
Complete System Bill of Materials
For a fully functional Velomitor CT monitoring loop, engineers typically specify the following components:
- Bently Nevada 190501-13-00-01 – Velomitor CT Velocity Transducer (this item)
- Bently Nevada 330130-040-00-00 – Extension Cable (armored, 4 m)
- Bently Nevada 3500/42M – Velocity Monitor Module (3500 rack)
- Bently Nevada 3500/20 – Rack Interface Module
- Bently Nevada 3500/15 – Power Supply Module
- Mounting stud adapter (1/4-28 UNF) or magnetic base (for temporary surveys)
Contact support@konmask.com for bundle pricing on complete monitoring loops.
Compliance & Industry Standards
- API 670 – Machinery Protection Systems (5th Edition)
- ISO 10816-3 – Mechanical vibration: evaluation of machine vibration by measurements on non-rotating parts
- IEC 60068-2 – Environmental testing (temperature, humidity, vibration)
- MIL-C-5015 – Connector specification (suffix -01 variant)
- ATEX / IECEx – Consult factory for zone-rated variants
- RoHS Compliant – Restriction of Hazardous Substances
Quality Assurance & Sourcing
Every Bently Nevada 190501-13-00-01 unit shipped from Konmask.com undergoes the following verification process:
- Visual inspection against OEM dimensional drawings
- Sensitivity calibration check (100 mV/in/s ±5%) with traceable reference
- Connector continuity and insulation resistance test
- Serialization and traceability documentation provided with each unit
- Sourced from authorized distributors and verified surplus channels; no counterfeit-risk grey-market supply
How to Source This Part
Konmask.com maintains stock of the Bently Nevada 190501-13-00-01 for immediate dispatch. To place an order or request a formal quotation:
- Online: Add to cart and proceed to checkout at konmask.com
- Email RFQ: support@konmask.com – include quantity, required delivery date, and ship-to country
- Phone / WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Lead Time: In-stock units ship within 1–3 business days; EXW Xiamen, DDP options available
- Export: We handle export documentation, HS code classification (9031.80), and commercial invoices for international buyers
Application-Specific FAQ
Q: Can the 190501-13-00-01 replace a geophone-type velocity sensor directly?
A: Yes. The Velomitor CT outputs a velocity-proportional signal compatible with the same monitor cards. Sensitivity scaling may need adjustment in the 3500 rack configuration if the original sensor had a different mV/in/s rating.
Q: What is the maximum cable run length from sensor to monitor?
A: Bently Nevada recommends a maximum of 30 m (100 ft) for standard coaxial cable. For longer runs, use a signal conditioner or remote transmitter to maintain signal integrity.
Q: Is this sensor suitable for use in hazardous areas (Zone 1 / Zone 2)?
A: The standard 190501-13-00-01 is not ATEX-certified. For hazardous-area installations, consult Konmask for the appropriate intrinsically safe barrier or ATEX-rated variant.
Q: What is the difference between the Velomitor CT and the standard Velomitor (330500 series)?
A: The Velomitor CT (190501 series) features an enhanced low-frequency response (down to 2 Hz) and a more robust MIL-spec connector, making it better suited for low-speed machinery and outdoor installations.
Q: Does Konmask provide calibration certificates?
A: Yes. Factory calibration data is available upon request. Third-party NIST-traceable calibration certificates can be arranged for an additional fee.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






