Bently Nevada 200155-11-CN Low Frequency Trendmaster Pro Accelerometer | Replacement, Equivalent & Selection Guide
The Bently Nevada 200155-11-CN is a low-frequency accelerometer designed for the Trendmaster Pro continuous monitoring system. Engineered for precision vibration measurement on rotating machinery, it delivers reliable data in demanding industrial environments. This page provides full technical specifications, compatible replacement models, application guidance, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Part Number: 200155-11-CN
- Manufacturer: Bently Nevada (Baker Hughes)
- Series: Trendmaster Pro
- Type: Low Frequency Accelerometer (Seismic / Velocity-type response)
- Measurement: Vibration (acceleration / velocity)
- Frequency Range: Low frequency (optimized for <1 Hz to ~1 kHz applications)
- Output Signal: Compatible with Trendmaster Pro I/O module inputs
- Connector: CN-type (Chinese market variant)
- Housing: Stainless steel, IP-rated industrial enclosure
- Weight: Approx. 400 g
- Mounting: Stud or adhesive mount
- Operating Temperature: -40°C to +121°C (typical Bently Nevada range)
- Application: Continuous online machinery monitoring
Compatible Replacement & Equivalent Models
When the 200155-11-CN is unavailable or requires a cost-effective alternative, the following models offer compatible performance in Trendmaster Pro systems or equivalent monitoring architectures:
- Bently Nevada 200155-01 — Standard international variant; same sensing element, different connector
- Bently Nevada 200155-11 — Direct predecessor; verify connector compatibility before substitution
- Bently Nevada 330400-xx-xx — Proximity probe series for shaft vibration (different measurement principle; use for radial/axial displacement)
- Emerson CSI 2130 Accelerometer — Portable route-based alternative for periodic monitoring
- PCB Piezotronics 603C01 — Third-party low-frequency ICP® accelerometer; requires signal conditioner adaptation
- Wilcoxon Research 793L — Low-frequency seismic accelerometer; widely used as a drop-in for slow-speed machinery
Note: Always verify signal conditioning compatibility, connector pinout, and sensitivity range before substituting. Contact support@konmask.com for a free compatibility check.
Why Choose the Original 200155-11-CN
- Factory-calibrated: Ships with Bently Nevada calibration certificate for direct system integration
- Plug-and-play: Designed specifically for Trendmaster Pro I/O modules — no signal conditioning adaptation required
- CN connector variant: Optimized for Chinese market installations with locally standardized wiring
- Long-term data integrity: Consistent sensitivity ensures accurate trend data over the asset lifecycle
- OEM warranty support: Eligible for Baker Hughes / Bently Nevada service and recalibration programs
Typical Applications
- Steam and gas turbine bearing housing vibration monitoring
- Centrifugal compressor casing vibration measurement
- Slow-speed rotating equipment (fans, cooling towers, ID/FD fans)
- Pump and motor vibration trending in continuous process plants
- Petrochemical, power generation, and LNG plant machinery protection systems
- Pulp & paper and cement plant rotating equipment
System Compatibility
- Primary System: Bently Nevada Trendmaster Pro (2000 Series I/O modules)
- Compatible I/O Modules: Trendmaster Pro Accelerometer Input Module (AIM)
- DCS Integration: Compatible with DeltaV, Ovation, and third-party DCS via Trendmaster Pro gateway
- Software: System 1 Condition Monitoring Software (Bently Nevada)
- Communication: Supports Modbus, OPC-DA/UA via Trendmaster Pro host
Selection Guide
Use the following criteria to confirm the 200155-11-CN is the right choice — or to identify the best alternative:
- Step 1 — Confirm monitoring system: Is your system Trendmaster Pro 2000 series? If yes, the 200155-11-CN is the correct OEM sensor.
- Step 2 — Verify connector type: CN suffix = Chinese market connector. If your installation uses a different connector standard, select the 200155-01 or 200155-11 variant.
- Step 3 — Assess frequency range: For machinery running below 600 RPM (10 Hz), a low-frequency accelerometer like this model is essential. For high-speed machinery (>3,600 RPM), consider a standard ICP accelerometer.
- Step 4 — Continuous vs. periodic monitoring: For online 24/7 protection, use the 200155-11-CN. For route-based periodic checks, a portable accelerometer may suffice.
- Step 5 — Budget vs. OEM: If budget is constrained, evaluate the Wilcoxon 793L or PCB 603C01 with appropriate signal conditioning. Contact us for a cost-benefit analysis.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Each unit inspected for physical integrity, connector condition, and labeling authenticity
- Calibration certificates provided where available; recalibration service can be arranged
- Anti-counterfeit verification: serial number cross-referenced with Bently Nevada records on request
- Secure packaging with ESD protection and moisture barrier for international shipping
How to Order
- Part Number: 200155-11-CN
- Minimum Order: 1 unit
- Lead Time: In-stock units ship within 3–5 business days; sourced units 2–4 weeks
- Payment: T/T, PayPal, credit card, and trade finance options available
- Shipping: DHL, FedEx, UPS worldwide; sea freight available for bulk orders
- Request a Quote: support@konmask.com | +0086 19859288691
- Online Order: Add to cart above or contact us for volume pricing
Replacement & Compatibility FAQ
Q: Can I use the 200155-11-CN as a direct replacement for the 200155-01?
A: The sensing element is identical, but the CN connector differs from the standard international connector. A wiring adapter or pigtail modification is required. Contact us for adapter availability.
Q: Is the 200155-11-CN compatible with System 1 software?
A: Yes. When connected via a Trendmaster Pro AIM module, all data streams are fully compatible with Bently Nevada System 1 Condition Monitoring Software.
Q: What is the difference between an accelerometer and a proximity probe for this application?
A: Accelerometers measure casing/bearing housing vibration (seismic). Proximity probes (e.g., 330400 series) measure shaft relative displacement. Both are often used together in a complete machinery protection scheme.
Q: Can I use a third-party accelerometer in my Trendmaster Pro system?
A: Third-party sensors can be used if their sensitivity and output impedance match the AIM module specifications. However, OEM sensors are recommended for warranty compliance and data accuracy.
Q: Do you offer recalibration services?
A: Yes. We can arrange recalibration through accredited metrology partners. Contact support@konmask.com for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






