Bently Nevada 330103-00-02-10-01-00 – Eddy Current Proximity Transducer System | 3300 XL Series Platform
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact, continuous shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system has been deployed in critical turbomachinery protection applications across power generation, oil & gas, petrochemical, and heavy industrial sectors for decades.
Product Positioning: Part number 330103-00-02-10-01-00 is a complete eddy current transducer system comprising a probe, extension cable, and proximitor (signal conditioner). It delivers a calibrated, linear DC output proportional to the gap between the probe tip and the observed conductive target surface — enabling real-time shaft radial vibration, axial position, and differential expansion monitoring with sub-micron resolution.
Complete Technical Specifications
- Part Number: 330103-00-02-10-01-00
- Series / Platform: Bently Nevada 3300 XL
- Transducer Type: Eddy Current (Non-Contact) Proximity Transducer System
- Probe Tip Diameter: 8 mm (standard)
- Cable Length (Extension): 2 m (extension cable included)
- Proximitor Supply Voltage: –24 VDC (nominal)
- Output Signal: –2 VDC to –18 VDC (linear range)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm to 2.25 mm (10 mil to 90 mil)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Operating Temperature (Probe): –35°C to +177°C (–31°F to +351°F)
- Operating Temperature (Proximitor): –35°C to +85°C
- Target Material: AISI 4140 steel or equivalent ferromagnetic alloy
- Ingress Protection: IP67 (probe and connector)
- Compliance: API 670, CE, RoHS
- Connector Type: MIL-C-5015 series (standard Bently Nevada)
- Weight: Approx. 40 g (probe assembly)
Proven Application Environments
- Steam and gas turbine radial shaft vibration monitoring
- Centrifugal compressor axial position and thrust measurement
- Pump and motor bearing proximity sensing
- Gearbox differential expansion monitoring
- Expander and blower critical machinery protection per API 670
- Integration with Bently Nevada 3500 Series rack-based protection systems
- Retrofit and replacement for legacy 3300 Series installations
Engineering Advantages
- Non-contact measurement: Zero mechanical wear, suitable for continuous 24/7 operation in harsh environments
- High linearity: ±1% full-scale accuracy across the calibrated linear range
- Wide temperature range: Qualified for high-temperature turbine bearing housings up to +177°C
- System-calibrated: Probe, cable, and proximitor are factory-matched and calibrated as a system — do not mix components from different system sets
- API 670 compliant: Meets the mandatory machinery protection standard for critical rotating equipment in the process industries
- Direct 3500 rack compatibility: Plug-and-play integration with Bently Nevada 3500/40M, 3500/42M, and 3500/45 monitor modules
System Architecture & Signal Flow
The 330103-00-02-10-01-00 system operates on the eddy current principle. The probe tip generates a high-frequency electromagnetic field (oscillator frequency: ~1 MHz). When a conductive target enters the field, eddy currents are induced, loading the oscillator and producing a proportional change in the proximitor output voltage. The signal chain is:
Probe Tip → Extension Cable (2 m) → Proximitor / Signal Conditioner → –24 VDC Supply → DC Output (–2 to –18 VDC) → Monitor Input Card (e.g., 3500/40M)
The output is a negative-going DC voltage: a larger gap produces a less negative voltage (closer to –2 VDC); a smaller gap produces a more negative voltage (closer to –18 VDC). This convention is consistent across all Bently Nevada 3300 XL and 3500 Series systems.
Sourcing & Quality Verification
- All units sourced through verified industrial automation supply channels with full traceability
- Each unit inspected for physical integrity, connector condition, and cable continuity prior to dispatch
- Original OEM packaging preserved where available; factory labels and date codes intact
- Certificate of conformance (CoC) available upon request for critical installation documentation
- Konmask.com maintains a zero-counterfeit policy — all Bently Nevada products are authenticated against OEM part number databases before listing
Procurement Process
- Step 1: Confirm your system configuration — verify probe tip diameter, cable length, and proximitor supply voltage match your existing 3300 XL installation
- Step 2: Submit your purchase order or inquiry via the product page or email support@konmask.com
- Step 3: Receive order confirmation with lead time and shipping details within 1 business day
- Step 4: Expedited dispatch available for critical plant shutdowns — contact us directly at +0086 19859288691
- Step 5: Post-delivery technical support available for installation and commissioning queries
Technical FAQ
Q: Can I use this probe with a different proximitor from another 3300 XL set?
A: No. The 3300 XL system is factory-calibrated as a matched set (probe + cable + proximitor). Mixing components from different system sets will invalidate the calibration and produce inaccurate output. Always replace as a complete system.
Q: Is this compatible with the Bently Nevada 3500 Series monitoring rack?
A: Yes. The 330103-00-02-10-01-00 is fully compatible with 3500/40M, 3500/42M, and 3500/45 monitor modules. Verify the input channel configuration (radial vibration vs. axial position) matches your application.
Q: What is the maximum cable run from probe to proximitor?
A: The standard system includes a 2 m extension cable. Total cable length (armored probe cable + extension) must not exceed the system-specified maximum (typically 5 m or 9 m depending on configuration) to maintain calibration accuracy.
Q: What target material is required for accurate measurement?
A: The system is calibrated for AISI 4140 steel. Other ferromagnetic or non-ferromagnetic materials will shift the scale factor. Bently Nevada provides correction factors for common alternative target materials.
Q: Do you provide a Certificate of Conformance?
A: Yes. CoC documentation is available upon request. Please specify your requirement at the time of order.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






