Bently Nevada 330103-00-14-05-02-CN – Eddy-Current Proximity Transducer System | 3300 XL Series
Engineering Background
The Bently Nevada 3300 XL Series represents the industry benchmark for non-contacting vibration and position measurement in rotating machinery. Engineered to API 670 standards, these eddy-current transducer systems are the preferred choice of reliability engineers and OEM integrators worldwide for turbines, compressors, pumps, and gearboxes operating in critical service.
Product Positioning
The 330103-00-14-05-02-CN is a complete proximity transducer system comprising an 8 mm probe, 5-metre extension cable, and compatible driver/proximitor. It delivers continuous, real-time shaft radial vibration and axial position data with sub-micron resolution — essential for predictive maintenance programs and API 670-compliant machinery protection systems.
Complete Technical Specifications
| Part Number | 330103-00-14-05-02-CN |
| Series / Platform | Bently Nevada 3300 XL |
| Sensor Type | Eddy-Current (Non-Contacting) Proximity Transducer |
| Probe Tip Diameter | 8 mm |
| Measurement Range | 0 – 200 mil pp (0 – 5.08 mm pp) |
| Linear Range | 25 – 225 mil (0.635 – 5.715 mm) |
| Scale Factor | 200 mV/mil (7.87 V/mm) |
| Frequency Response | DC – 10,000 Hz (–3 dB) |
| Supply Voltage | –24 VDC (–20 to –26 VDC) |
| Output Voltage | –1 to –17 VDC (nominal gap: –10 VDC) |
| Extension Cable Length | 5 m (16.4 ft) — suffix -05 |
| Probe Cable Length | 0.5 m integral — suffix -00-14 |
| Connector Type | Coaxial, TNC (suffix -02) |
| Target Material | AISI 4140 steel (standard); consult factory for other alloys |
| Operating Temperature | –35 °C to +177 °C (probe); –35 °C to +85 °C (driver) |
| Ingress Protection | IP67 (probe assembly) |
| Approvals / Compliance | API 670, CE, ATEX (consult datasheet for zone ratings) |
| Weight | Approx. 40 g (probe + cable assembly) |
| Country of Origin | United States |
Proven Application Environments
- Steam and gas turbines (radial shaft vibration, thrust position)
- Centrifugal and reciprocating compressors
- Boiler feed pumps and large motor-driven equipment
- Gearboxes and expanders in petrochemical plants
- API 670 machinery protection systems (MPS) paired with 3500 Series monitors
- Condition monitoring retrofits on legacy turbomachinery
Engineering Advantages
- Non-contacting measurement — zero mechanical wear, unlimited service life on the sensor
- Flat frequency response to 10 kHz — captures sub-synchronous, synchronous, and high-frequency vibration events
- High temperature probe rating (+177 °C) — suitable for hot-section turbine bearing housings without additional cooling
- 200 mV/mil scale factor — direct compatibility with Bently Nevada 3500/3300 monitor cards; no re-ranging required
- IP67 sealed assembly — resists oil mist, steam, and wash-down environments
- API 670 certified — satisfies insurance, regulatory, and OEM acceptance criteria without additional qualification testing
System Architecture & Signal Flow
The 330103-00-14-05-02-CN operates as a three-component system:
- Probe (330103) — 8 mm eddy-current sensing element with 0.5 m integral cable, threaded M10 × 1 body for direct bearing-housing mounting.
- Extension Cable (330130-050-00-00) — 5 m coaxial cable transmitting the high-frequency oscillator signal between probe and driver with minimal signal loss.
- Driver / Proximitor (330180 or 3300 XL NSv) — oscillator/demodulator converting gap distance to a proportional DC voltage output, powered by –24 VDC from the monitor rack.
Output voltage feeds directly into Bently Nevada 3500 Series monitor input cards (or equivalent), where gap, vibration amplitude, and phase are computed and compared against alarm/danger setpoints.
Sourcing & Quality Verification
- All units sourced through authorised distribution channels or verified surplus with full traceability documentation.
- Each assembly undergoes incoming inspection: visual, dimensional, and functional verification against OEM datasheet parameters.
- Calibration certificates and test reports available upon request for critical-service applications.
- Counterfeit-risk mitigation: serial number and date-code verification performed prior to dispatch.
Procurement Process
- Submit your RFQ via support@konmask.com or WhatsApp +0086 19859288691.
- Receive stock confirmation, lead time, and formal quotation within 1 business day.
- Issue PO — we accept T/T, L/C, and major credit cards.
- Shipment via DHL / FedEx with full export documentation (commercial invoice, packing list, COO).
- Post-delivery technical support available from our engineering team.
Technical FAQ
Q: Is the 330103-00-14-05-02-CN interchangeable with the 330103-00-14-10-02-CN?
A: The only difference is extension cable length (5 m vs. 10 m). Probe and driver specifications are identical; the systems are electrically interchangeable if cable routing permits.
Q: Can this probe measure non-ferrous targets?
A: Eddy-current sensitivity varies with target conductivity and permeability. Bently Nevada provides target material correction factors; contact our engineering team for application-specific guidance.
Q: What monitor cards are compatible?
A: The 330103 series is natively compatible with Bently Nevada 3500/40M, 3500/42M, 3500/45, and 3300 Series monitor cards. Third-party monitors accepting –24 VDC-powered, 200 mV/mil transducers are also compatible.
Q: Do you supply the complete system (probe + cable + driver)?
A: Yes. We can supply individual components or complete matched sets. Specify your requirements in the RFQ.
Q: Is expedited shipping available?
A: Yes — next-flight-out and same-day dispatch options are available for critical plant shutdowns. Contact us directly for urgent requirements.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






