Bently Nevada 330104-00-04-10-01-CN Proximity Transducer System – 3300 XL Series
When a critical rotating machine loses its vibration monitoring capability, the consequences are immediate and severe: undetected shaft displacement, catastrophic bearing failure, unplanned shutdowns, and in worst cases, complete destruction of turbines, compressors, or pumps worth millions of dollars. In high-stakes industrial environments — oil & gas platforms, power generation plants, and petrochemical facilities — the absence of a reliable proximity transducer system is not a maintenance gap; it is an operational crisis waiting to happen.
The Bently Nevada 330104-00-04-10-01-CN is a precision-engineered proximity transducer system from the globally trusted 3300 XL Series — Bently Nevada’s flagship eddy-current sensing platform. Designed to deliver continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion, this system is the industry benchmark for rotating machinery protection. Deployed across thousands of critical assets worldwide, the 3300 XL Series is the preferred choice of rotating equipment engineers and reliability professionals in over 100 countries.
Technical Specifications
- Part Number: 330104-00-04-10-01-CN
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Cable Length: 1.0 m (standard configuration)
- Extension Cable Length: 2.5 m
- Thread Size: 8 mm
- Linear Range: 2.0 mm (80 mil)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: -35°C to +177°C (probe); -35°C to +85°C (driver)
- Supply Voltage: -24 VDC (nominal)
- Output: -1 VDC to -21 VDC
- Connector Type: CN (standard connector)
- Approvals: CE, ATEX, FM (refer to datasheet for full certification list)
- Compatible Monitor: Bently Nevada 3300 Series, System 1 Condition Monitoring
Note: All specifications are based on published Bently Nevada documentation. Verify with official datasheet before engineering design.
Key Features & Benefits
- Non-Contact Measurement: Eddy-current technology eliminates mechanical wear, ensuring zero-maintenance sensing over the full equipment lifecycle.
- Wide Frequency Response (DC–10 kHz): Captures both slow-roll runout and high-frequency vibration events critical for early fault detection.
- High-Temperature Probe Tolerance: Rated to +177°C, suitable for hot-section turbine environments without signal degradation.
- Plug-and-Play 3300 XL Compatibility: Direct drop-in replacement for existing 3300 XL installations — no recalibration of the monitor required.
- CN Connector Configuration: Standardized connector ensures reliable field termination and reduced installation error risk.
- Hazardous Area Rated: ATEX/FM approvals support deployment in Zone 1/Division 1 classified areas common in oil & gas and chemical plants.
- Long-Term Signal Stability: Precision-wound coil and temperature-compensated driver maintain calibration accuracy over years of continuous operation.
Industry & Equipment Applications
- Oil & Gas: Centrifugal compressors, gas turbines, expanders on upstream/midstream/downstream facilities
- Power Generation: Steam turbines, gas turbines, hydro generators — radial vibration and axial position monitoring
- Petrochemical & Refining: Reactor feed pumps, cracked gas compressors, process gas blowers
- LNG Plants: Main refrigerant compressor trains requiring continuous API 670 compliant monitoring
- Marine & Offshore: Propulsion turbines and auxiliary rotating equipment on FPSOs and platforms
- Pulp & Paper / Steel Mills: High-speed rolls, ID fans, and boiler feed pumps
System Integration & Compatible Parts
The 330104-00-04-10-01-CN is designed to integrate seamlessly within the Bently Nevada 3300 XL ecosystem. Compatible and commonly paired components include:
- Drivers/Oscillator-Demodulators: 330180-X1-05, 330180-51-05 (3300 XL 8mm driver series)
- Monitors: Bently Nevada 3300/16 Monitor, 3500/42M Proximitor/Seismic Monitor
- Condition Monitoring Software: Bently Nevada System 1 (S1)
- Extension Cables: 330130-045-00-CN, 330130-080-00-CN
- Target Material: AISI 4140 steel shaft (standard); consult Bently Nevada for non-standard alloys
When replacing or upgrading, always verify the complete part number string (probe + extension cable + driver) to ensure system-level calibration is maintained per API 670 requirements.
Our Quality Assurance Process
At Konmask.com, every Bently Nevada component we supply undergoes a rigorous multi-stage verification process before shipment:
- Source Verification: Parts are sourced exclusively from authorized distributors, certified surplus channels, or directly from OEM-approved supply chains.
- Visual & Physical Inspection: Each unit is inspected for connector integrity, cable sheath condition, label authenticity, and housing damage.
- Documentation Review: We verify traceability documentation including manufacturer certificates of conformance (CoC) where available.
- Functional Testing: Where applicable, proximity systems are bench-tested for output voltage linearity and scale factor verification.
- Secure Packaging: Anti-static packaging with moisture-barrier protection ensures safe transit to your facility.
How to Order
- Submit your inquiry via the Contact / RFQ form on this page or email support@konmask.com.
- Provide your required quantity, delivery timeline, and destination country.
- Our technical team will confirm availability, lead time, and issue a formal quotation within 24 business hours.
- Upon PO confirmation, we arrange inspection, documentation, and export packaging.
- Shipment via DHL / FedEx / freight forwarder with full tracking and commercial invoice.
We support customers in the USA, Europe, Middle East, Southeast Asia, and globally. Export documentation (CO, packing list, commercial invoice) provided as standard.
Why Choose Konmask.com?
- ✅ Industrial Automation Specialists: Focused exclusively on PLC, DCS, vibration monitoring, and control system components — not a generalist marketplace.
- ✅ Genuine Parts Guarantee: We do not sell counterfeit or uncertified components. Traceability documentation available on request.
- ✅ Technical Pre-Sales Support: Our engineers can assist with cross-referencing, compatibility verification, and system integration questions.
- ✅ Fast Global Shipping: Stocked items typically ship within 3–5 business days. Express options available.
- ✅ B2B Inquiry-Friendly: We understand procurement workflows — PO-based purchasing, formal quotations, and NET payment terms available for qualified buyers.
- ✅ After-Sales Support: Technical assistance available post-delivery for installation and commissioning queries.
Frequently Asked Questions
- Q: Is the 330104-00-04-10-01-CN a direct replacement for older 330104 series probes?
- A: Yes, the 330104-00-04-10-01-CN is part of the 3300 XL family and is backward-compatible with existing 3300 XL monitor installations. Always verify the driver part number to ensure matched system calibration.
- Q: What does the “CN” suffix in the part number indicate?
- A: The “CN” designates the connector type used on this proximity probe configuration. It specifies the termination style for the probe-to-extension cable interface, ensuring correct mating with compatible 3300 XL extension cables.
- Q: Can this transducer be used in ATEX Zone 1 hazardous areas?
- A: The 3300 XL series carries ATEX and FM certifications for use in hazardous locations. Confirm the specific approval markings on the unit’s label and consult the Bently Nevada safety manual for installation requirements.
- Q: What target material is required for accurate measurement?
- A: The standard calibration is performed on AISI 4140 steel. For shafts made of other alloys (stainless steel, Inconel, titanium), a material correction factor or field recalibration may be required. Contact our technical team for guidance.
- Q: Do you provide a warranty or return policy?
- A: Yes. We offer a standard warranty on all supplied components. Terms are outlined in our quotation. Please contact support@konmask.com for details specific to your order.
- Q: How long does delivery take?
- A: Delivery time depends on stock availability and destination. In-stock items typically ship within 3–5 business days. We will confirm lead time in your quotation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330104-00-04-10-01-CN Proximity Transducer System”,
“description”: “Bently Nevada 330104-00-04-10-01-CN is a 3300 XL Series eddy-current proximity transducer system for non-contact shaft vibration and position monitoring in critical rotating machinery.”,
“sku”: “330104-00-04-10-01-CN”,
“mpn”: “330104-00-04-10-01-CN”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Transducer System”,
“url”: “https://konmask.com/products/bently-nevada-330104-00-04-10-01-cn-proximity-transducer-system”,
“offers”: {
“@type”: “Offer”,
“url”: “https://konmask.com/products/bently-nevada-330104-00-04-10-01-cn-proximity-transducer-system”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330104-00-04-10-01-CN a direct replacement for older 330104 series probes?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes, the 330104-00-04-10-01-CN is part of the 3300 XL family and is backward-compatible with existing 3300 XL monitor installations. Always verify the driver part number to ensure matched system calibration.”
}
},
{
“@type”: “Question”,
“name”: “What does the CN suffix in the part number indicate?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The CN designates the connector type used on this proximity probe configuration, specifying the termination style for the probe-to-extension cable interface.”
}
},
{
“@type”: “Question”,
“name”: “Can this transducer be used in ATEX Zone 1 hazardous areas?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The 3300 XL series carries ATEX and FM certifications for use in hazardous locations. Confirm the specific approval markings on the unit label and consult the Bently Nevada safety manual.”
}
},
{
“@type”: “Question”,
“name”: “What target material is required for accurate measurement?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Standard calibration is performed on AISI 4140 steel. For other alloys, a material correction factor or field recalibration may be required.”
}
},
{
“@type”: “Question”,
“name”: “How long does delivery take?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “In-stock items typically ship within 3-5 business days. Lead time will be confirmed in your formal quotation.”
}
}
]
}
]
}






