Bently Nevada 330104-00-05-20-12-CN Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-00-05-20-12-CN is a high-precision proximity transducer from the 3300 XL Series, engineered for continuous shaft vibration and position monitoring in rotating machinery. As an authorized sourcing partner, Konmask.com supplies genuine, tested, and traceable units with full documentation support.
Technical Specifications
- Part Number: 330104-00-05-20-12-CN
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL Proximity Transducer System
- Probe Type: Eddy-current proximity probe
- Cable Length: 5 m (probe) + 20 m (extension cable)
- Thread Size: M12 × 1
- Connector: CN (standard coaxial connector)
- Measurement Range: 0.25 mm – 2.26 mm (linear range)
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Temperature Range: −35 °C to +177 °C (probe tip)
- Target Material: AISI 4140 steel or equivalent
- Weight: Approx. 210 g
- Compliance: API 670, CE
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330104-00-05-20-12-CN. Always verify electrical and mechanical compatibility before substitution:
- 330104-00-05-10-02-00 – Same series, shorter extension cable (10 m), different connector
- 330104-00-05-20-02-00 – 20 m extension, standard connector variant
- 330180-91-00 – 3300 XL 8 mm proximity transducer system (alternative probe diameter)
- 330130-040-00-00 – 3300 NSv Proximity Transducer (next-generation compatible)
- Emerson CSI 330104 series – OEM-equivalent under Emerson rebranding
- EPRO PR6423 series – Third-party eddy-current equivalent (verify driver compatibility)
Note: Replacement selection must account for probe gap, driver module (e.g., 3300 XL driver), cable length, and connector type. Contact Konmask for a compatibility assessment.
Why Choose the Original Model
- ✅ API 670 certified – Meets international machinery protection standards
- ✅ Factory-calibrated – Guaranteed scale factor accuracy out of the box
- ✅ Full system traceability – Matched probe, extension cable, and driver for optimal performance
- ✅ Long-term availability – Konmask maintains stock of legacy and current Bently Nevada parts
- ✅ OEM documentation – Supplied with datasheet, calibration certificate, and installation guide
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Compressor radial and axial position measurement
- Pump and motor bearing displacement monitoring
- Gearbox and fan shaft eccentricity detection
- Critical rotating machinery in oil & gas, power generation, and petrochemical plants
System Compatibility
The 330104-00-05-20-12-CN is designed to operate within the Bently Nevada 3300 XL Monitoring System and is compatible with:
- 3300/16 Dual Vibration Monitor
- 3300/20 Thrust Position Monitor
- 3300/25 Differential Expansion Monitor
- 3500 Series Machinery Protection System (with appropriate driver)
- System 1 Condition Monitoring Software
Selection Guide
Use the table below to decode the 330104-XX-XX-XX-XX-XX part number structure:
- 330104 – Base model: 3300 XL 8 mm proximity transducer system
- 00 – Standard configuration
- 05 – Probe cable length: 5 m
- 20 – Extension cable length: 20 m
- 12 – Connector type: 12 (coaxial, CN style)
- CN – Regional/connector designation: CN standard
Need a different cable length or connector? Contact our engineers for a custom configuration quote.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or directly from Bently Nevada / Baker Hughes
- Pre-shipment inspection: visual, dimensional, and functional verification
- Anti-counterfeit checks: serial number validation against OEM database
- Packaging: original OEM packaging preserved where available
- Warranty: 12-month replacement warranty on all stocked units
How to Order
- Confirm part number: 330104-00-05-20-12-CN
- Specify quantity and required delivery timeline
- Request a quote via support@konmask.com or call +0086 19859288691
- Receive proforma invoice with lead time confirmation
- Payment → shipment with tracking and full documentation
Replacement & Compatibility FAQ
Q: Can I use a 330104-00-05-20-02-00 instead of the -12-CN variant?
A: The core probe and extension are identical; the difference is the connector type. Verify your driver module accepts the alternate connector before substituting.
Q: Is the 330104-00-05-20-12-CN compatible with the Bently Nevada 3500 system?
A: Yes, with the appropriate 3500/42M or 3500/45 driver module. Confirm driver input impedance and gap voltage requirements.
Q: What is the lead time for this part?
A: In-stock units ship within 3–5 business days. Out-of-stock lead time is typically 4–8 weeks. Contact us for real-time availability.
Q: Do you provide calibration certificates?
A: Yes. All units are supplied with OEM calibration documentation. Third-party recalibration is available on request.
Q: Can Konmask source discontinued or obsolete Bently Nevada parts?
A: Yes. We specialize in legacy industrial automation components. Submit your part number for a sourcing assessment.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






