Bently Nevada 330104-10-20-10-02-CN – Eddy Current Proximity Transducer System | 3300 XL Series Platform
Engineering Background: The Bently Nevada 3300 XL Series represents the industry benchmark for non-contact vibration and position measurement in rotating machinery protection systems. Engineered to API 670 standards, this transducer system is the preferred choice for turbines, compressors, pumps, and motors in critical process industries worldwide.
Product Positioning: The 330104-10-20-10-02-CN is a complete eddy current proximity transducer system comprising a probe, extension cable, and proximitor/oscillator driver. It delivers continuous, real-time shaft vibration and axial position data to plant DCS and machinery protection systems, enabling predictive maintenance and preventing catastrophic machinery failure.
Complete Technical Specifications
- Part Number: 330104-10-20-10-02-CN
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Tip Diameter: 5 mm (8 mm thread)
- Probe Cable Length: 1.0 m (integral)
- Extension Cable Length: 2.0 m
- Total System Cable Length: 5.0 m (standard)
- Proximitor Driver: 3300 XL 8mm Proximitor Sensor
- Supply Voltage: -24 VDC (nominal)
- Output Voltage Range: -1 VDC to -21 VDC
- Scale Factor: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm to 2.26 mm (10 mil to 90 mil)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Temperature Range (Probe): –35°C to +177°C
- Temperature Range (Proximitor): –35°C to +85°C
- Target Material: AISI 4140 steel (standard); consult factory for other alloys
- Connector Type: CN (Chinese market standard connector)
- Compliance: API 670, CE, RoHS
- Weight: 210 g (system)
- Country of Origin: USA (Baker Hughes / Bently Nevada)
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal and reciprocating compressor rotor position measurement
- Boiler feed pump and cooling water pump protection
- Gearbox and motor bearing vibration surveillance
- Petrochemical, LNG, power generation, and refinery critical machinery trains
- Integration with Bently Nevada 3500 Series Machinery Protection Racks
- Retrofit and replacement for legacy 3300 Series installations
Engineering Advantages
- Non-contact measurement: Zero mechanical wear; continuous operation without maintenance intervals
- High frequency response: DC to 10 kHz captures sub-synchronous, synchronous, and super-synchronous vibration components
- API 670 compliant: Meets international machinery protection standards for critical rotating equipment
- Wide temperature tolerance: Probe rated to +177°C for high-temperature bearing housings
- CN connector variant: Optimized for Chinese industrial installations with locally compatible termination
- Plug-and-play compatibility: Direct replacement for existing 3300 XL system installations without recalibration
- Proven field reliability: Millions of operating hours across global critical infrastructure
System Architecture & Signal Flow
The 330104-10-20-10-02-CN operates as a three-component eddy current system:
- Probe (330104): Generates a high-frequency electromagnetic field (1.0 MHz nominal). As the conductive target (shaft) moves within the linear range, eddy currents alter the probe’s impedance.
- Extension Cable: Transmits the modulated RF signal from probe to proximitor with controlled impedance. Cable length is system-calibrated — do not substitute without recalibration.
- Proximitor/Oscillator-Demodulator: Converts the impedance change into a DC voltage output proportional to gap distance. Output feeds directly to the 3500 rack monitor card or DCS analog input.
Signal output: –1 VDC (near gap) to –21 VDC (far gap), linear across the 0.25–2.26 mm measurement range at 7.87 V/mm scale factor.
Sourcing & Quality Verification
- All units sourced through authorized industrial distribution channels or verified surplus with full traceability documentation
- Each system inspected for physical integrity: probe tip, cable jacket, connector pins, and proximitor housing
- Functional verification available upon request prior to shipment
- Original Bently Nevada / Baker Hughes labeling and part number markings preserved
- Counterfeit risk mitigation: serial number cross-reference available for factory-registered units
Procurement Process
- Confirm compatibility: Verify target material, gap range, and cable length against your machinery protection rack configuration (3500/40M, 3500/42M, etc.)
- Request quotation: Contact support@konmask.com with your PO requirements, delivery timeline, and any documentation needs (CoC, test reports)
- Order confirmation: Lead time typically 3–7 business days for in-stock units; expedited shipping available
- Shipping & customs: Export documentation (commercial invoice, packing list, HS code 9031.80) provided for international orders
- After-sales support: Technical assistance available for installation, commissioning, and gap-setting procedures
Technical FAQ
Q: Can this transducer system be used with non-Bently Nevada monitors?
A: Yes, the –24 VDC supply and 0 to –24 VDC output are compatible with most third-party vibration monitors accepting standard eddy current inputs, provided the scale factor (7.87 V/mm) is configured correctly.
Q: What is the difference between the CN and standard connector variants?
A: The CN suffix denotes a connector configuration optimized for Chinese market installations. Electrically and mechanically identical to the standard variant; only the connector termination style differs.
Q: Can I extend the cable beyond 5 m total?
A: No. The 3300 XL system is factory-calibrated for a specific total cable length. Altering cable length requires full system recalibration by Bently Nevada or an authorized service center.
Q: What target materials are compatible?
A: AISI 4140 steel is the standard calibration target. Other ferromagnetic and non-ferromagnetic alloys will produce different scale factors. Consult Bently Nevada application engineering for non-standard target materials.
Q: Is this unit new or refurbished?
A: Please contact us directly at support@konmask.com to confirm current stock condition, availability, and any applicable test documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






