Genuine Bently Nevada 330104-00-07-90-02-05 8mm Proximity Probe | 3300 XL Series – Verified Source
The Bently Nevada 330104-00-07-90-02-05 is an OEM-grade 8mm proximity probe engineered for the industry-leading 3300 XL Proximity Transducer System. Designed for continuous shaft vibration and position monitoring in rotating machinery, this probe delivers the precision and reliability that critical industrial environments demand. Sourced directly through verified supply channels, every unit sold by Konmask.com undergoes rigorous authenticity screening before dispatch.
Technical Specifications
- Part Number: 330104-00-07-90-02-05
- Brand: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Probe Tip Diameter: 8 mm
- Cable Length: 7.62 m (25 ft) — suffix -07
- Connector Type: Integral cable with standard BNC-compatible termination
- Operating Temperature: -35°C to +177°C (-31°F to +350°F)
- Supply Voltage: -24 VDC (nominal)
- Output Range: -1 VDC to -17 VDC
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm to 2.54 mm (10 to 100 mil)
- Target Material: AISI 4140 steel (standard)
- Approvals: CE, ATEX, FM, CSA (refer to current Bently Nevada datasheet for full listing)
- Weight: Approx. 200 g
- Country of Origin: United States
Our 4-Step Quality Verification Process
At Konmask.com, every Bently Nevada component passes through a documented 4-step verification protocol before it reaches your facility:
- Step 1 — Source Authentication: All units are procured exclusively from authorized distributors or verified OEM surplus channels. No grey-market or counterfeit sources are accepted.
- Step 2 — Physical Inspection: Each probe is inspected for label integrity, connector condition, cable jacket quality, and part-number conformance against Bently Nevada’s published specifications.
- Step 3 — Functional Bench Test: Where applicable, units are bench-tested for output linearity and sensitivity within OEM-specified tolerances using calibrated test equipment.
- Step 4 — Secure Packaging & Documentation: Verified units are packed in anti-static, moisture-resistant packaging with a Konmask inspection certificate and original manufacturer documentation where available.
Key Features & Benefits
- ✅ OEM Genuine: Authentic Bently Nevada part — not a clone or compatible substitute.
- ✅ Drop-in Replacement: Direct replacement for existing 3300 XL system installations with zero reconfiguration.
- ✅ High-Temperature Rated: Reliable operation up to 177°C, suitable for turbine and compressor environments.
- ✅ Long Cable Run: 7.62 m integral cable reduces field splicing and signal degradation risk.
- ✅ Hazardous Area Approved: ATEX/FM certified for use in explosive atmospheres.
- ✅ Immediate Availability: In-stock units ready for same-day or next-business-day dispatch.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing condition monitoring
- Gearbox and fan shaft displacement sensing
- Critical rotating machinery protection systems in oil & gas, power generation, and petrochemical plants
Compatible System Components
The 330104-00-07-90-02-05 is designed to operate within the complete Bently Nevada 3300 XL Proximity Transducer System. Typical compatible components include:
- Extension Cables: 330130 Series (matched length required)
- Proximitor Sensors: 3300 XL 8mm Proximitor (e.g., 330180 Series)
- Monitors: 3500 Series Machinery Protection System
- Junction Boxes: Bently Nevada 3300 Series field junction enclosures
Note: Total system cable length (probe + extension) must match the Proximitor calibration. Consult Bently Nevada System 1 documentation or contact Konmask technical support for system matching assistance.
Global Sourcing & Shipping Capabilities
- Stock Location: Warehoused in China with global export capability
- Lead Time: In-stock orders typically ship within 1–3 business days
- Shipping Methods: DHL Express, FedEx International Priority, UPS Worldwide, sea freight for bulk orders
- Export Documentation: Commercial invoice, packing list, certificate of origin, and Konmask inspection certificate provided as standard
- Customs Support: HS Code 8543.70 (electronic instruments); Konmask can assist with customs declaration documentation
- Minimum Order: 1 unit (bulk pricing available for orders of 5+ units — contact us)
Certifications & Compliance Statement
Bently Nevada 330104-00-07-90-02-05 proximity probes are manufactured to comply with the following standards (verify current certification status with Bently Nevada / Baker Hughes for your specific application):
- CE Marking — EU Machinery Directive compliance
- ATEX Directive 2014/34/EU — Zone 1 & Zone 2 hazardous areas
- FM Approved — North American hazardous location certification
- CSA Certified — Canadian Standards Association
- RoHS Compliant — Restriction of Hazardous Substances
Konmask.com Compliance Statement: We do not alter, re-label, or modify OEM components. All products are sold as-sourced with full traceability documentation. Konmask.com is an independent distributor and is not an authorized Bently Nevada / Baker Hughes dealer. Buyers are responsible for confirming suitability for their specific application.
How to Order
- Add to Cart — Select quantity and click “Add to Cart” or “Buy Now”.
- Request a Quote — For bulk orders (5+ units), email support@konmask.com for volume pricing.
- Technical Consultation — Unsure about system compatibility? Contact our engineering team before ordering — we’ll verify the fit.
- Payment — We accept T/T bank transfer, PayPal, and major credit cards. LC accepted for orders above USD 5,000.
- Shipping Confirmation — You will receive a tracking number and export documents within 24 hours of dispatch.
Authenticity & Trust FAQ
Q: Are these genuine Bently Nevada parts?
A: Yes. All units are sourced from verified OEM or authorized surplus channels and pass our 4-step inspection process. We do not sell clones or compatible substitutes.
Q: Can you provide a certificate of conformance?
A: Yes. A Konmask inspection certificate is included with every shipment. Original manufacturer CoC is provided where available from our supply chain.
Q: What is your return policy?
A: We accept returns within 30 days for unused, unopened units in original packaging. Defective units are replaced or refunded — contact support@konmask.com within 7 days of receipt.
Q: Do you offer warranty?
A: Yes — 12-month warranty against manufacturing defects. This does not cover damage from improper installation or use outside OEM specifications.
Q: Can you source other Bently Nevada part numbers?
A: Absolutely. Konmask.com specializes in hard-to-find industrial automation components. Submit your part number to support@konmask.com and we will respond within 24 hours.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
