Turbine & Compressor Vibration Monitoring Solution – Bently Nevada 330104-00-12-05-02-CN | 3300 XL Series
The Bently Nevada 330104-00-12-05-02-CN is a high-precision eddy-current proximity transducer system engineered for continuous shaft vibration, position, and eccentricity measurement in rotating machinery. Part of the industry-standard 3300 XL Series, this system delivers the signal integrity and environmental resilience demanded by power generation, oil & gas, and heavy industrial applications.
Where This Product Is Used
Engineers and reliability teams specify the 330104-00-12-05-02-CN across a wide range of critical rotating equipment:
- Steam & Gas Turbines — Continuous radial shaft vibration monitoring per API 670 requirements
- Centrifugal Compressors — Real-time rotor displacement measurement to prevent surge and mechanical failure
- Pumps & Fans — Bearing journal orbit analysis and early fault detection
- Gearboxes — Gear mesh frequency monitoring and shaft position tracking
- Hydro Turbines — Axial position and thrust bearing protection
- Marine Propulsion Systems — Shaft alignment verification under dynamic load conditions
Technical Specifications
- Part Number: 330104-00-12-05-02-CN
- Series: Bently Nevada 3300 XL Proximity Transducer System
- Probe Cable Length: 5 m (standard)
- Extension Cable Length: 5 m
- Probe Thread: 3/8-24 UNF
- Measurement Range: 0–90 mil pp (0–2.286 mm pp)
- Sensitivity: 200 mV/mil (7.87 V/mm)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Operating Temperature: –35°C to +177°C (probe tip)
- Output Voltage: –18 VDC nominal (with –24 VDC supply)
- Connector: CN-type (China regional standard connector)
- Agency Approvals: CE, ATEX, IECEx (consult datasheet for zone ratings)
Why Engineers Specify This Model
- API 670 Compliant — Meets the machinery protection standard for critical turbomachinery installations
- 3300 XL Compatibility — Direct drop-in replacement for existing 3300 XL monitor systems; no recalibration required
- CN Connector — Optimized for installations in China and Asia-Pacific facilities using regional wiring standards
- Proven EMI Immunity — Coaxial cable design rejects electrical noise in VFD-heavy environments
- Long-Term Stability — Thermally compensated circuitry maintains calibration accuracy across wide temperature swings
- Minimal Maintenance — Solid-state, no-contact sensing eliminates wear and extends MTBF beyond 100,000 hours
Complete System Bill of Materials
The 330104-00-12-05-02-CN ships as a complete, pre-matched system. Typical BOM for a single measurement channel:
- 330104-00-12-05-02-CN Proximity Probe + Extension Cable + Proximitor® Sensor (matched set)
- Bently Nevada 3300/16 or 3500/42 Vibration Monitor Module
- 3300 XL Mounting Bracket & Probe Guard (site-specific)
- –24 VDC Power Supply (e.g., Bently Nevada 3300/20)
- Interconnect Cable to DCS/PLC (4–20 mA or ±10 V output)
Contact Konmask for complete channel pricing and system integration support.
Compliance & Industry Standards
- API 670 (4th & 5th Edition) — Machinery Protection Systems
- ISO 10816 / ISO 20816 — Mechanical Vibration Evaluation
- IEC 61511 — Functional Safety (SIL-capable installations)
- ATEX Directive 2014/34/EU & IECEx — Hazardous Area Certification
- CE Marking — EMC Directive 2014/30/EU
Quality Assurance & Sourcing
Every Bently Nevada 330104-00-12-05-02-CN unit supplied by Konmask.com is:
- Sourced from authorized distributors or verified OEM-surplus channels
- Inspected for physical integrity, connector condition, and cable continuity prior to dispatch
- Supplied with original manufacturer documentation where available
- Traceable via serial number for warranty and calibration records
We do not supply counterfeit, re-labeled, or non-OEM components. All units are tested against Bently Nevada factory specifications.
How to Source This Part
Ready to order or need a formal quotation?
- In-Stock Orders: Add to cart and check out directly — we ship globally via DHL, FedEx, and UPS Express
- Bulk / Project Quotes: Email support@konmask.com with your quantity and delivery timeline
- Urgent Requirement: Call or WhatsApp +0086 19859288691 for same-day response
- Lead Time: In-stock units ship within 1–2 business days; ex-stock lead time 3–7 business days
Application-Specific FAQ
Q: Is the 330104-00-12-05-02-CN a direct replacement for the 330104-00-12-05-02-00?
A: Yes. The CN suffix denotes the regional CN-type connector. Electrically and mechanically, the system is identical to the standard -00 variant. Verify connector compatibility at your junction box before installation.
Q: What Proximitor® driver is required for this probe?
A: This probe is calibrated for use with the Bently Nevada 3300 XL Proximitor® Sensor (e.g., 330180 series). Do not mix with 7200 or 3000 series drivers without recalibration.
Q: Can this transducer be used in a hazardous (Ex) area?
A: Yes, subject to the specific ATEX/IECEx zone rating of the installed Proximitor® sensor. Consult the system datasheet and your site safety authority before installation in Zone 1 or Zone 2 areas.
Q: What is the maximum shaft speed this system can monitor?
A: The 3300 XL system supports shaft speeds up to 600,000 RPM (10,000 Hz frequency response), making it suitable for high-speed compressors and expanders.
Q: Does Konmask provide calibration certificates?
A: Factory calibration documentation is included where available. Third-party NIST-traceable calibration can be arranged on request — contact us for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






