Bently Nevada 330104-11-15-10-02-00 — Eddy Current Proximity Transducer System | 3300 XL Series
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system is deployed globally in critical turbomachinery protection and condition monitoring applications where measurement accuracy and long-term reliability are non-negotiable.
Product Positioning: Part number 330104-11-15-10-02-00 is a complete eddy current transducer system comprising a 5 mm probe tip, 1.5 m armored probe cable, 5 m extension cable, and a matched driver/oscillator. It is designed for direct integration with Bently Nevada 3300 and 3500 series monitoring racks, delivering a calibrated output of –24 VDC at mid-gap with a sensitivity of 200 mV/mil (7.87 V/mm).
Complete Technical Specifications
- Part Number: 330104-11-15-10-02-00
- Series / Platform: Bently Nevada 3300 XL
- Transducer Type: Eddy Current (Non-Contact) Proximity Probe
- Probe Tip Diameter: 5 mm (11 mm body)
- Probe Cable Length: 1.5 m (armored, integral)
- Extension Cable Length: 5 m
- Driver / Oscillator: Included (matched, factory-calibrated)
- Output Voltage (Mid-Gap): –24 VDC nominal
- Sensitivity: 200 mV/mil | 7.87 V/mm
- Linear Range: 0.25 mm – 2.25 mm (10 mil – 90 mil)
- Supply Voltage: –24 VDC (±1 VDC)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Operating Temperature: –35°C to +177°C (probe); –35°C to +85°C (driver)
- Target Material: AISI 4140 steel (standard calibration)
- Connector Type: 2-pin MIL-C-5015 (probe); BNC (driver output)
- Ingress Protection: IP67 (probe assembly)
- Compliance: API 670, CE, RoHS
- Weight: Approx. 80 g (probe + cable assembly)
- Country of Origin: USA
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal compressor rotor position and thrust measurement
- Pump and motor bearing journal orbit analysis
- Gearbox high-speed shaft eccentricity detection
- Expander and blower critical speed runup/coastdown testing
- Petrochemical, LNG, power generation, and offshore platforms
Engineering Advantages
- Factory-Matched System: Probe, extension cable, and driver are calibrated as a matched set — eliminates field calibration errors and ensures API 670 traceability.
- Wide Thermal Range: Probe rated to +177°C for high-temperature bearing housings without signal degradation.
- High Frequency Response: DC–10 kHz bandwidth captures sub-synchronous instabilities, blade-pass frequencies, and gear mesh events.
- Armored Cable Construction: Stainless steel armor on probe cable resists mechanical damage in harsh industrial environments.
- Direct Rack Compatibility: Plug-and-play with Bently Nevada 3300 and 3500 series monitor cards — no signal conditioning adapters required.
- Long-Term Stability: Eddy current technology provides drift-free measurement over years of continuous operation.
System Architecture & Signal Flow
The 330104-11-15-10-02-00 system operates on the eddy current principle: the probe tip generates a high-frequency electromagnetic field (oscillator frequency ~1 MHz). When a conductive target (shaft) enters the field, eddy currents are induced, loading the oscillator and producing a DC voltage proportional to the gap distance. Signal flow: Probe Tip → Integral Probe Cable (1.5 m) → Extension Cable (5 m) → Driver/Oscillator → Monitor Card Input (3300/3500 rack). The driver outputs a buffered –24 VDC-referenced analog signal directly compatible with Bently Nevada Keyphasor and vibration monitor inputs.
Sourcing & Quality Verification
- All units sourced from authorized distributors or verified surplus channels with documented chain of custody.
- Each system undergoes incoming inspection: visual, dimensional, and functional output verification against factory calibration curves.
- Serialization and date codes are checked against Bently Nevada manufacturing records where available.
- Units shipped with inspection report and, where applicable, original factory calibration certificate.
- Konmask.com maintains a no-counterfeit policy — any unit failing authentication is quarantined and not listed.
Procurement Process
- Inquiry: Submit your PO number, required quantity, and delivery timeline via email or the contact form.
- Quote & Lead Time: We respond within 1 business day with pricing, availability, and estimated ship date.
- Order Confirmation: Payment via T/T, PayPal, or credit card. Pro-forma invoice issued upon request.
- Inspection & Packing: Unit inspected, photographed, and packed in anti-static foam with desiccant.
- Shipping: DHL / FedEx Express worldwide. Export documentation (commercial invoice, packing list, COO) included.
- After-Sales: 90-day warranty against defects. Technical support available via email.
Technical FAQ
Q: Is this a complete system or just the probe?
A: This is a complete matched system — probe (5 mm tip, 1.5 m cable), 5 m extension cable, and driver/oscillator are all included and factory-calibrated together.
Q: Which Bently Nevada monitor cards is this compatible with?
A: Compatible with 3300 series (3300/16, 3300/20, 3300/25, 3300/55) and 3500 series (3500/42, 3500/45, 3500/46) radial vibration and position monitor cards.
Q: Can I use a different extension cable length?
A: The system is calibrated for a specific total cable length (probe + extension = 6.5 m total). Substituting a different extension cable will shift the calibration curve and require field recalibration. Contact us if you need a different configuration.
Q: What target material is the calibration based on?
A: Standard calibration is for AISI 4140 steel. For other target materials (stainless, titanium, Inconel), a material correction factor must be applied per Bently Nevada application notes.
Q: Do you provide a calibration certificate?
A: Where available, original factory calibration documentation is included. All units are functionally verified prior to shipment.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






