Vibration Monitoring Solution – Bently Nevada 330104-10-21-10-02-00 | 3300 XL Series
The Bently Nevada 330104-10-21-10-02-00 is a complete eddy-current proximity transducer system engineered for continuous, high-accuracy shaft vibration and position measurement in rotating machinery. Part of the industry-standard 3300 XL Series, this system delivers the signal fidelity and environmental robustness demanded by power generation, oil & gas, and petrochemical plant engineers worldwide.
Where This Product Is Used
- Steam & Gas Turbines — Shaft radial vibration monitoring on HP/LP turbine stages; early detection of rotor imbalance and bearing wear.
- Centrifugal Compressors — Continuous rotor position and vibration surveillance in pipeline and refinery compression trains.
- Pumps & Fans — Axial position and eccentricity measurement on large BFW pumps and induced-draft fans.
- Gearboxes — Gear mesh frequency analysis and shaft orbit monitoring in high-speed gearbox applications.
- Hydro Turbines — Radial shaft vibration and thrust position monitoring in hydro-electric generating units.
- Marine Propulsion — Shaft alignment and vibration monitoring on ship propulsion shafting systems.
Technical Specifications
- Part Number: 330104-10-21-10-02-00
- Series: 3300 XL Proximity Transducer System
- Probe Length: 10 mm (standard)
- Cable Length: 2.1 m (extension cable)
- Driver/Oscillator: 3300 XL 8 mm Driver
- Measurement Range: 0.25 mm – 2.25 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Temperature Range: –35 °C to +177 °C (probe tip)
- Output Voltage: –18 VDC nominal (at mid-range)
- Supply Voltage: –24 VDC ± 1 VDC
- Target Material: AISI 4140 steel (or equivalent ferromagnetic alloy)
- Ingress Protection: IP67 (probe & connector)
- Approvals: CE, ATEX, IECEx (consult datasheet for zone classification)
Why Engineers Specify This Model
- Drop-in 3300 XL Compatibility — Direct replacement for legacy 3300 series installations; no re-cabling or re-calibration of existing monitors required.
- Extended Temperature Stability — Maintains ±1% sensitivity accuracy across the full –35 °C to +177 °C operating envelope, critical for hot-section turbine bearing pedestals.
- High EMI Immunity — Shielded coaxial cable construction rejects VFD switching noise and high-voltage interference common in power plant environments.
- API 670 Compliant — Meets the mandatory machinery protection standard for critical rotating equipment in oil & gas facilities.
- Long MTBF — Solid-state eddy-current technology with no moving parts; typical field life exceeds 15 years in continuous service.
Complete System Bill of Materials
- 330104-10-21-10-02-00 Proximity Probe (8 mm, 10 mm tip length)
- 330130-045-00-00 Extension Cable (4.5 m, armored)
- 330180-X1-05 3300 XL 8 mm Driver (–24 VDC)
- 3500/42M Proximitor Monitor Module (rack-mount, 4-channel)
- 3500/05-01-02-00-00-01 Rack Power Supply
- Mounting bracket & probe holder (application-specific; consult Konmask application engineers)
Compliance & Industry Standards
- API 670 (5th Edition) — Machinery Protection Systems
- ISO 10816 / ISO 20816 — Mechanical Vibration Evaluation
- IEC 61508 — Functional Safety (SIL assessment available)
- ATEX Directive 2014/34/EU — Equipment for Explosive Atmospheres
- IECEx Scheme — International Explosive Atmospheres Certification
- CE Marking — EU Declaration of Conformity
Quality Assurance & Sourcing
Every Bently Nevada 330104-10-21-10-02-00 unit supplied by Konmask.com undergoes incoming inspection including sensitivity verification, linearity check, and insulation resistance testing before dispatch. We source exclusively from authorized distributors and verified OEM channels. A calibration certificate and full traceability documentation are available upon request. All units are shipped in original anti-static packaging with tamper-evident seals.
How to Source This Part
- In-Stock Orders: Add to cart and check out — standard lead time 3–7 business days (DHL Express / FedEx International Priority).
- Bulk / Project Quotes: Email support@konmask.com with your BOM and required delivery date for a project price.
- Urgent Shutdown Support: Call +0086 19859288691 for same-day quotation on emergency plant shutdown requirements.
- Export & Customs: We handle export documentation, HS code classification, and CITES/dual-use compliance for all international shipments.
Application-Specific FAQ
Q: Is the 330104-10-21-10-02-00 compatible with the 3500 Series monitoring rack?
A: Yes. The 3300 XL driver output (–24 VDC, 200 mV/mil) is fully compatible with all Bently Nevada 3500 Series monitor modules including the 3500/42M and 3500/40M.
Q: What target material is required for accurate measurement?
A: The probe is calibrated for AISI 4140 steel. For other target materials (stainless steel, titanium, Inconel), a material correction factor must be applied — contact our application engineers for a correction curve.
Q: Can this transducer be used in a hazardous (classified) area?
A: Yes, subject to the correct ATEX/IECEx zone classification and use of an approved safety barrier or Zener barrier in the associated apparatus circuit. Consult the Bently Nevada ATEX certificate for zone and group details.
Q: What is the difference between the 330104 and 330105 probe series?
A: The 330104 uses an 8 mm probe tip diameter; the 330105 uses a 5 mm tip. The 8 mm probe provides a wider linear range (0.25–2.25 mm) and is preferred for large-shaft applications (>75 mm diameter).
Q: How do I verify the system is functioning correctly after installation?
A: Perform a static gap voltage check at the driver output. At the nominal 1.0 mm gap, output should read –10.2 VDC ± 0.5 VDC. Use a Bently Nevada 330180 calibrator for full system verification per API 670 Annex D.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






