Bently Nevada 330104-18-22-10-02-00 – Eddy Current Proximity Transducer | 3300 XL Series Platform
Engineering Background: The Bently Nevada 3300 XL Proximity Transducer System is the industry benchmark for non-contact shaft vibration and position measurement in rotating machinery. Engineered to API 670 standards, this system delivers continuous, real-time displacement data critical for turbine, compressor, and pump protection in process-critical environments.
Product Positioning: The 330104-18-22-10-02-00 is a complete eddy current transducer assembly configured for 18 mm probe diameter, 22-inch (558.8 mm) integral cable, 10-meter extension cable, standard 200 mV/mil sensitivity, and -24 VDC bias output. It is the preferred choice for OEM machinery builders and MRO replacement programs requiring drop-in compatibility with existing Bently Nevada 3300 monitor racks.
Complete Technical Specifications
- Part Number / SKU: 330104-18-22-10-02-00
- Series / Platform: Bently Nevada 3300 XL Proximity Transducer System
- Probe Diameter: 18 mm
- Integral Cable Length: 22 inches (558.8 mm)
- Extension Cable Length: 10 meters
- Sensitivity: 200 mV/mil (7.87 V/mm)
- Bias Voltage Output: -24 VDC (nominal)
- Linear Range: 25–325 mil (0.635–8.255 mm)
- Frequency Response: DC to 10,000 Hz (–3 dB)
- Supply Voltage: -24 VDC ± 1 VDC
- Operating Temperature: -35°C to +121°C (probe); -35°C to +66°C (driver)
- Target Material: AISI 4140 steel (standard); other alloys per calibration
- Connector Type: Standard BNC / MIL-spec per configuration code
- Approvals: CE, FM, CSA, ATEX (per variant)
- Compliance: API 670 5th Edition
- Weight: Approx. 210 g (complete assembly)
- Country of Origin: United States
Proven Application Environments
- Steam and gas turbine shaft radial vibration monitoring
- Centrifugal and reciprocating compressor rotor position measurement
- Boiler feed pump and cooling water pump protection systems
- Gearbox and motor bearing displacement monitoring
- Petrochemical, LNG, power generation, and offshore platform machinery
- OEM integration with GE, Siemens, MAN, and Solar Turbines equipment
Engineering Advantages
- API 670 Compliant: Meets the most stringent international standard for machinery protection instrumentation
- Non-Contact Measurement: Zero mechanical wear; suitable for continuous 24/7 operation
- Wide Frequency Bandwidth: DC to 10 kHz captures both slow-roll runout and high-frequency vibration events
- Integral Cable Design: Eliminates field-assembly errors; maintains calibrated system performance
- Drop-In Replacement: Direct compatibility with 3300 series monitor racks — no reconfiguration required
- Hazardous Area Rated: ATEX/FM certified for Zone 1 / Division 1 installations
System Architecture & Signal Flow
The 330104-18-22-10-02-00 operates as a three-component eddy current system:
- Probe (330104): 18 mm diameter sensing element generates a high-frequency electromagnetic field. Gap changes between probe tip and rotating target shaft modulate the field impedance.
- Extension Cable (330130-10-00): 10-meter coaxial cable transmits the modulated signal from probe to driver with minimal signal degradation.
- Driver / Oscillator-Demodulator: Converts impedance modulation into a DC-proportional voltage output (–24 VDC bias, 200 mV/mil sensitivity) compatible with 3300 series monitor inputs.
Output signal feeds directly into Bently Nevada 3300 series monitor cards for real-time vibration, position, and eccentricity measurement with alarm and trip relay outputs.
Sourcing & Quality Verification
- Source: Konmask.com sources 330104-18-22-10-02-00 units from authorized distributors, decommissioned OEM spares programs, and certified MRO channels
- Inspection: Each unit undergoes visual inspection, connector integrity check, and documentation verification prior to shipment
- Traceability: Original Bently Nevada part labels, date codes, and calibration records preserved where available
- Warranty: 90-day functional warranty against defects in materials and workmanship
- Condition: New surplus or refurbished — condition specified at time of quotation
Procurement Process
- Step 1: Submit RFQ via Konmask.com product page or email support@konmask.com with quantity and required delivery date
- Step 2: Receive stock confirmation, condition report, and firm quotation within 1 business day
- Step 3: Approve proforma invoice; payment via T/T, PayPal, or credit card
- Step 4: Unit packed to IEC 60068 transport standards; shipped via DHL / FedEx with tracking
- Step 5: Receive shipment with packing list, inspection report, and available OEM documentation
Technical FAQ
Q: Is the 330104-18-22-10-02-00 compatible with the 3500 series monitors?
A: No. The 330104 series is calibrated for 3300 XL monitor inputs. For 3500 series compatibility, the 330730 or 330780 series probes are required.
Q: Can the extension cable length be changed in the field?
A: No. The probe, integral cable, and extension cable are a calibrated system. Changing cable length requires full system recalibration by a Bently Nevada authorized service center.
Q: What target material is the standard calibration based on?
A: AISI 4140 steel. For other target materials (e.g., Inconel, titanium), a material correction factor or custom calibration is required — contact our engineering team.
Q: Do you provide calibration certificates?
A: Original calibration documentation is provided where available. For new calibration, we can refer you to a certified Bently Nevada service partner.
Q: What is the minimum order quantity?
A: Single units are available. Volume pricing is available for orders of 3 or more units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






