Genuine Bently Nevada 330905-00-08-10-02-05 Proximity Probe | 3300 NSv Series – Verified Source
The Bently Nevada 330905-00-08-10-02-05 is a high-precision eddy-current proximity probe from the industry-leading 3300 NSv Series, engineered for continuous shaft vibration and position monitoring in critical rotating machinery. At Konmask.com, every unit is sourced through verified supply channels and undergoes our rigorous 4-step quality verification before shipment.
Technical Specifications
- Part Number: 330905-00-08-10-02-05
- Series: Bently Nevada 3300 NSv Proximity System
- Probe Type: Eddy-Current Non-Contact Proximity Probe
- Tip Diameter: 8 mm
- Cable Length: 1.0 m (standard)
- Extension Cable: 5.0 m (integrated)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 mm – 2.54 mm (10 – 100 mil)
- Operating Temperature: -35°C to +177°C
- Connector: Integral coaxial, reverse SMA
- Agency Approvals: CE, ATEX, IECEx (intrinsically safe variants)
- Weight: Approx. 80 g
Our 4-Step Quality Verification Process
- Source Authentication — All units are procured directly from authorized distributors or OEM-certified supply chains. Counterfeit screening is performed at intake.
- Physical Inspection — Housing integrity, connector condition, cable jacket, and label legibility are inspected against factory standards.
- Functional Bench Test — Each probe is bench-tested for output linearity and sensitivity within Bently Nevada factory tolerances using calibrated signal conditioning equipment.
- Documentation Verification — Serial number, date code, and country of manufacture are cross-referenced with manufacturer records where available. Calibration certificates provided upon request.
Key Features & Benefits
- ✅ Non-contact measurement — Zero mechanical wear; ideal for continuous 24/7 monitoring
- ✅ High signal stability — Minimal drift over wide temperature ranges
- ✅ Drop-in replacement — Fully compatible with existing 3300 NSv monitor racks without reconfiguration
- ✅ Hazardous area rated — Suitable for ATEX/IECEx Zone 1 & Zone 2 environments
- ✅ Long service life — Stainless steel housing with chemical-resistant cable jacket
- ✅ Verified genuine — Every unit passes Konmask’s 4-step QC before dispatch
Typical Applications
- Steam and gas turbine shaft radial vibration monitoring
- Compressor rotor position and thrust measurement
- Pump and motor bearing displacement monitoring
- Gearbox and expander shaft orbit analysis
- Critical machinery protection systems in oil & gas, power generation, and petrochemical plants
Compatible System Components
- Extension Cables: Bently Nevada 330130 Series (1.0 m – 9.0 m)
- Drivers / Oscillators: Bently Nevada 3300 XL 8 mm Proximitor® Sensor (330180 Series)
- Monitor Racks: Bently Nevada 3500 Series Machinery Protection System
- Barriers: Compatible MTL / Pepperl+Fuchs Zener barriers for IS installations
- Junction Boxes: Standard coaxial field junction boxes for multi-probe installations
Global Sourcing & Shipping Capabilities
Konmask.com maintains an active global sourcing network for Bently Nevada components, enabling rapid fulfillment for both spot orders and long-term supply agreements.
- Stock Status: In-stock units ship within 1–3 business days; sourced units typically 5–10 business days
- Shipping Methods: DHL Express, FedEx International Priority, UPS Worldwide, sea freight for bulk orders
- Export Compliance: All shipments comply with applicable export control regulations (EAR/ECCN)
- Regions Served: Americas, Europe, Middle East, Southeast Asia, Australia
- Customs Documentation: Commercial invoice, packing list, and certificate of origin provided as standard
Certifications & Compliance Statement
The Bently Nevada 330905-00-08-10-02-05 is manufactured to comply with the following standards:
- CE Marking — EMC Directive 2014/30/EU & Low Voltage Directive 2014/35/EU
- ATEX Directive 2014/34/EU — Ex ia IIC T6 Ga (intrinsically safe variants)
- IECEx Scheme — IECEx certification for global hazardous area acceptance
- API 670 — Machinery Protection Systems standard compliance
Konmask.com is an independent distributor. All trademarks and brand names belong to their respective owners. We are not an authorized Bently Nevada dealer; products are sourced through secondary market channels and verified independently.
How to Order
- Add to Cart — Click “Add to Cart” for standard single-unit orders.
- Request a Quote — For bulk orders (5+ units), OEM replacement programs, or long-term supply contracts, email support@konmask.com with your required quantity and delivery timeline.
- Provide Your Application Details — Share your existing system configuration (monitor model, cable length, target material) to confirm compatibility before ordering.
- Receive Proforma Invoice — We issue a proforma invoice with full part traceability details within 24 business hours.
Authenticity & Trust FAQ
Q: How do I know this is a genuine Bently Nevada product?
A: Every unit passes our 4-step verification process including physical inspection, functional bench testing, and serial number cross-referencing. We provide documentation upon request.
Q: Can you provide a calibration certificate?
A: Yes. Calibration certificates and test reports are available upon request for an additional fee. Please contact us before placing your order.
Q: What is your return policy?
A: We offer a 30-day return window for units that do not match the described specifications. Items must be returned in original condition with all documentation.
Q: Do you offer warranty?
A: We provide a 90-day functional warranty against defects in materials and workmanship. This does not cover damage from improper installation or misapplication.
Q: Can you source other Bently Nevada part numbers?
A: Yes. Konmask.com maintains sourcing capability across the full Bently Nevada 3300, 3500, and Trendmaster product families. Contact us with your part list.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
