Bently Nevada 330906-02-12-70-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330906-02-12-70-02-00 is a complete eddy-current proximity transducer system designed for continuous, non-contact measurement of shaft vibration, position, and eccentricity in rotating machinery. Engineered to integrate seamlessly with Bently Nevada 3300 Series monitoring systems, it delivers high-accuracy displacement signals in demanding industrial environments.
Technical Specifications
- Part Number: 330906-02-12-70-02-00
- Series: Bently Nevada 3300 XL / 330900 Series
- Type: Eddy-Current Proximity Transducer System
- Probe Cable Length: 2 m (integral)
- Extension Cable Length: 12 m
- Driver/Oscillator: 3300 XL 8mm Proximitor® Sensor
- Measurement Range: 0–2 mm (linear range)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Supply Voltage: –24 VDC (nominal)
- Output: –1 VDC to –11 VDC (proportional to gap)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: –35°C to +121°C (probe); –35°C to +66°C (driver)
- Connector: 2-pin MIL-C-5015 (probe end)
- Approvals: CE, ATEX, FM (refer to datasheet for zone ratings)
- Weight: ~300 g (system)
Compatible Replacement & Equivalent Models
When the original part is unavailable or cost-sensitive, the following models are verified functional equivalents or drop-in replacements. Always confirm cable lengths, connector types, and driver compatibility before substitution.
- 330906-02-12-05-02-00 – Same probe/driver, 5 m extension cable variant
- 330906-02-12-30-02-00 – 30 m extension cable variant for remote installations
- 330905-02-12-70-02-00 – 5 mm probe variant; verify gap range compatibility
- 330180-91-00 – 3300 XL 8mm Proximitor® Sensor (driver only replacement)
- Emerson 330906-02-12-70-02-00 – OEM-equivalent under Emerson branding post-acquisition
- Third-party 8mm eddy-current systems – Must match: –24 VDC supply, 200 mV/mil sensitivity, MIL-C-5015 connector
Contact Konmask.com for cross-reference verification before ordering a replacement.
Why Choose the Original Model
- Guaranteed OEM performance: Factory-calibrated sensitivity and linearity, no field adjustment required.
- System-certified integration: Plug-and-play with Bently Nevada 3300, 3500, and System 1 platforms.
- Proven reliability: Widely deployed in turbines, compressors, pumps, and generators worldwide.
- Full traceability: Serialized components with calibration certificates available on request.
- Long service life: Robust stainless-steel probe body rated for high-temperature, high-vibration environments.
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor eccentricity and runout detection
- Gearbox and fan shaft displacement monitoring
- API 670-compliant machinery protection systems
System Compatibility
- Monitors: Bently Nevada 3300 Series, 3500 Series, 1900/65A
- Software: System 1 Condition Monitoring, Orbit 60 Series
- Standards: API 670 (4th & 5th Edition), ISO 10816, IEC 61511
- Hazardous Area: ATEX Zone 1/2, FM Class I Div 1/2 (verify suffix codes)
Selection Guide
Use the part number suffix structure to select the correct configuration:
- 330906 – [Probe Dia.] – [Probe Cable m] – [Extension Cable m] – [Driver Type] – [Connector]
- Position 1 (02): 8 mm probe diameter
- Position 2 (12): 2 m integral probe cable
- Position 3 (70): 7 m extension cable (note: full system = 12 m with driver)
- Position 4 (02): Standard 3300 XL Proximitor® driver
- Position 5 (00): Standard connector configuration
If your installation requires a different cable length, hazardous-area rating, or connector type, contact our team for the correct suffix combination.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels.
- Each system inspected and tested prior to shipment.
- Calibration certificates and original packaging available where applicable.
- Konmask.com maintains strict anti-counterfeit sourcing protocols for all Bently Nevada / Emerson products.
How to Order
- Confirm your full part number: 330906-02-12-70-02-00
- Specify quantity and required delivery timeline.
- Contact us for pricing, lead time, and availability: support@konmask.com | +0086 19859288691
- Add to cart or request a formal quotation via the product page.
Replacement & Compatibility FAQ
Q: Can I use a 330905 probe with a 330906 driver?
A: Not directly. The 330905 (5 mm) and 330906 (8 mm) probes use different gap ranges and sensitivities. Mixing requires recalibration of the monitor.
Q: Is the 330906-02-12-70-02-00 compatible with the 3500 Series monitor?
A: Yes, with the appropriate I/O module. Verify the 3500/42M or 3500/40M module is configured for 8 mm eddy-current input.
Q: What is the difference between -70- and -05- in the part number?
A: The third suffix segment denotes extension cable length in decimeters. -70- = 7.0 m extension; -05- = 0.5 m extension. Total system reach depends on probe cable + extension cable.
Q: Can Konmask.com provide a calibration certificate?
A: Yes. Calibration documentation is available upon request for units sourced from OEM or authorized surplus channels.
Q: Do you offer expedited shipping for critical plant shutdowns?
A: Yes. Contact us directly at support@konmask.com with your urgency and we will prioritize accordingly.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






