Bently Nevada 330104-00-11-50-02-00 Proximity Transducer System | Replacement, Equivalent & Selection Guide
The Bently Nevada 330104-00-11-50-02-00 is a high-precision eddy-current proximity transducer system designed for continuous, non-contact measurement of shaft vibration, position, and speed in rotating machinery. As an authorized sourcing partner, Konmask.com provides genuine, tested, and equivalent-grade units with full traceability for industrial automation environments.
Technical Specifications
- Part Number: 330104-00-11-50-02-00
- Brand / Manufacturer: Bently Nevada (Baker Hughes)
- Series: 3300 XL 8mm Proximity Transducer System
- Sensing Technology: Eddy-current (non-contact)
- Probe Tip Diameter: 8 mm
- Cable Length: 1.0 m (extension cable)
- Measurement Range: 0–2.0 mm (linear range)
- Output Signal: –24 VDC nominal (standard Bently Nevada output)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Frequency Response: DC to 10,000 Hz
- Operating Temperature: –35°C to +121°C (probe); –35°C to +66°C (driver)
- Target Material: AISI 4140 steel or equivalent
- Connector: Standard BNC / MIL-spec
- Weight: ~80 g
- Compliance: CE, API 670
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330104-00-11-50-02-00. Always verify electrical and mechanical compatibility before substitution:
- Bently Nevada 330104-00-11-10-02-00 – Same series, shorter cable (0.5 m); direct drop-in for space-constrained installations
- Bently Nevada 330104-00-11-05-02-00 – 0.25 m cable variant; suitable for compact panel-mount configurations
- Bently Nevada 330180-X1-05 – 3300 NSv series; compatible driver/monitor interface, verify gap voltage
- Epro PR6423/010-040 – Third-party 8 mm eddy-current probe; API 670 compliant, widely used as functional equivalent
- Metrix ST5484E – Equivalent proximity transducer system; confirm output polarity and sensitivity before use
Note: Konmask.com recommends using OEM Bently Nevada parts wherever possible. Third-party equivalents are provided for reference and engineering evaluation only.
Why Choose the Original Model
- Factory-calibrated sensitivity (7.87 V/mm) ensures measurement accuracy without field recalibration
- Full API 670 compliance for machinery protection systems
- Seamless integration with Bently Nevada 3500 Series monitors and System 1 software
- Traceable lot documentation and OEM warranty support
- Proven reliability in turbines, compressors, pumps, and gearboxes worldwide
Typical Applications
- Shaft radial vibration monitoring on steam and gas turbines
- Axial position measurement on centrifugal compressors
- Differential expansion monitoring in power generation equipment
- Speed and phase reference (Keyphasor) measurement
- Bearing clearance and rotor dynamics analysis
System Compatibility
- Monitors: Bently Nevada 3500 Series, 3300 Series, TDXnet
- Software: System 1 Evolution, Orbit 60 Series
- DCS / PLC Integration: 4–20 mA output modules, PROFIBUS, Modbus RTU via signal conditioners
- Driver / Oscillator: Bently Nevada 330180 driver (sold separately)
Selection Guide
Use the table below to select the correct 330104 variant for your application:
- Cable Length: -05 = 0.25 m | -10 = 0.5 m | -11 = 1.0 m | -50 = 5.0 m
- Connector Type: -02-00 = Standard armored cable with BNC
- Target Material Code: Confirm AISI 4140 or equivalent for rated sensitivity
- Temperature Class: Verify probe and driver operating range against installation environment
- API 670 Requirement: Confirm monitor channel is certified for machinery protection use
If you are unsure which variant fits your system, contact support@konmask.com with your monitor model number and installation drawing.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Pre-shipment functional test and visual inspection on every unit
- Serialized traceability documentation available on request
- Secure anti-static packaging with humidity indicators
- Export compliance screening (EAR / ECCN) completed for international orders
How to Order
- Add the 330104-00-11-50-02-00 to your cart directly on this page
- For bulk orders (>5 units) or urgent requirements, email support@konmask.com
- Provide your monitor model, installation site, and required delivery date for expedited sourcing
- Payment: T/T, PayPal, credit card, and trade-term (EXW/FOB Xiamen) options available
Replacement & Compatibility FAQ
Q: Can I use a 330104-00-11-10-02-00 in place of the 330104-00-11-50-02-00?
A: Yes, the only difference is cable length (0.5 m vs 1.0 m). Verify that the shorter cable reaches your driver/monitor without adding extension cable, which can affect system accuracy.
Q: Is the Epro PR6423 a true drop-in replacement?
A: Functionally equivalent in most installations, but requires gap voltage verification and may need recalibration of the monitor channel. Not recommended for API 670 certified protection systems without engineering review.
Q: What is the lead time for the 330104-00-11-50-02-00?
A: In-stock units ship within 1–3 business days. Out-of-stock units typically have a 2–6 week sourcing lead time. Contact us for real-time availability.
Q: Do you provide calibration certificates?
A: Factory calibration data is included with new OEM units. For surplus units, functional test reports are available. Third-party NIST-traceable calibration can be arranged on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






