Bently Nevada 330910-00-16-05-02-00 Proximity Transducer System | 3300 XL Series

Bently Nevada 330910-00-16-05-02-00 Eddy Current Proximity Transducer System – 3300 XL Series

When a critical rotating machine loses its shaft vibration monitoring capability, the consequences are immediate and severe: undetected rotor imbalance, bearing wear, or shaft misalignment can escalate within minutes into catastrophic mechanical failure, unplanned downtime, and six-figure repair costs. In high-stakes environments — power generation turbines, petrochemical compressors, and steel mill drive trains — the absence of a reliable proximity transducer is not a maintenance gap; it is an operational liability.

The Bently Nevada 330910-00-16-05-02-00 is a precision eddy-current proximity transducer system within the industry-benchmark 3300 XL Series. Engineered for continuous, non-contact measurement of shaft radial vibration, axial position, and differential expansion, this system is the OEM-specified solution for GE, Siemens, MAN, and Solar Turbines machinery trains worldwide. Its 5 mm probe tip, 5-metre armored extension cable, and -24 VDC driver combination deliver the exact sensitivity and gap range demanded by API 670 machinery protection standards.

Technical Specifications

• Part Number: 330910-00-16-05-02-00
• Series: Bently Nevada 3300 XL Proximity Transducer System
• Probe Tip Diameter: 5 mm
• Cable Length (Extension): 5 metres (16 ft)
• Driver: -24 VDC, 3300 XL compatible
• Output Voltage Range: -2 VDC to -18 VDC (linear range)
• Scale Factor: 7.87 V/mm (200 mV/mil)
• Frequency Response: DC to 10,000 HzOperating Temperature: -35°C to +121°C (probe); -35°C to +66°C (driver)
• Ingress Protection: IP67 (probe assembly)
• Connector Type: 02 series (standard)
• Compliance: API 670, CE, RoHS
• Weight: Approx. 140 g

Key Features & Benefits

• Non-Contact Measurement: Eddy-current technology eliminates mechanical wear, ensuring measurement integrity over decades of continuous operation.
• API 670 Compliant: Meets the most stringent international standard for machinery protection systems, accepted by all major EPC contractors and end-users.
• Wide Temperature Range: Operates reliably in extreme environments from arctic compressor stations to tropical petrochemical plants.
• High Frequency Response (DC–10 kHz): Captures both low-speed shaft position and high-frequency vibration events critical for early fault detection.
• Plug-and-Play Compatibility: Direct replacement for existing 3300 XL installations — no recalibration of the monitoring rack required when replacing like-for-like.
• Armored Cable Construction: Stainless steel armor protects the extension cable against mechanical damage, chemical exposure, and EMI in harsh plant environments.
• Long-Term Availability: Konmask.com maintains stock of legacy and current-generation Bently Nevada transducer systems to support installed base maintenance.

Industry & Equipment Applications

• Power Generation: Steam turbines, gas turbines, hydro generators — shaft radial vibration and axial position monitoring.
• Oil & Gas: Centrifugal compressors, expanders, and pipeline pumps in upstream, midstream, and downstream facilities.
• Petrochemical & Refining: Critical service pumps, reactor agitators, and blower trains requiring continuous API 670 protection.
• Steel & Metals: Rolling mill drive trains, ID/FD fans, and large induction motor monitoring.
• Marine & Offshore: Propulsion shaft monitoring and topside compressor protection on FPSO and platform installations.
• Pulp & Paper: High-speed refiner and compressor monitoring in continuous-process mills.

System Integration & Compatible Parts

The 330910-00-16-05-02-00 is designed to integrate seamlessly within the Bently Nevada 3300 XL ecosystem. Compatible and commonly paired components include:

• Monitors: 3300/16 Dual Vibration Monitor, 3300/20 Thrust Position Monitor, 3500/42 Proximitor/Seismic Monitor
• Drivers (Proximitors): 330180 Series, 330130 Series XL Proximitor
• Extension Cables: 330130-080-00-00, 330130-045-00-00
• Mounting Hardware: 330105 Series probe holders, 02 Series connectors
• Rack Systems: Bently Nevada 3500 Series Machinery Protection System

Our Quality Assurance Process

Every Bently Nevada 330910-00-16-05-02-00 unit shipped from Konmask.com undergoes a rigorous multi-stage verification process:

• Visual Inspection: Probe tip, cable armor, and connector integrity checked against OEM cosmetic standards.
• Electrical Continuity Test: Full cable and probe circuit verified for open circuits, shorts, and insulation resistance.
• Functional Gap Test: Output voltage linearity verified across the specified gap range using calibrated test equipment.
• Documentation: Each unit is supplied with a test report and, where available, original OEM packaging and documentation.
• Traceability: Batch and serial records maintained for full supply chain traceability.

How to Order

1. Submit your inquiry via the Contact / RFQ form on this page with your required quantity and delivery timeline.
2. Our technical team will confirm part compatibility with your existing 3300 XL installation and provide a formal quotation within 24 hours.
3. Upon PO receipt, we arrange expedited shipping with full export documentation (commercial invoice, packing list, COO).
4. Lead time: Ex-stock units ship within 3–5 business days; sourced units within 2–4 weeks depending on origin.

Why Choose Konmask.com?

• Industrial Automation Specialists: We focus exclusively on PLC, DCS, and condition monitoring components — not a generalist distributor.
• Global B2B Supply: Serving engineering contractors, OEM service teams, and plant maintenance departments across 40+ countries.
• Legacy Part Expertise: Deep inventory and sourcing network for discontinued and long-lead Bently Nevada components.
• Technical Pre-Sales Support: Our engineers can verify cross-compatibility before you commit to a purchase order.
• Competitive Pricing: Direct sourcing relationships enable pricing that beats typical distributor markups.

Frequently Asked Questions

Q: Is the 330910-00-16-05-02-00 a complete system or just the probe?

A: It is a complete proximity transducer system, including the probe, 5-metre extension cable, and driver (Proximitor). All three components are calibrated as a matched set.

Q: Can this replace my existing 330910 series probe without recalibrating the monitor?

A: Yes — provided the replacement is a like-for-like 330910-00-16-05-02-00 with the same scale factor (200 mV/mil), no monitor recalibration is required. Always verify the driver output voltage at installation.

Q: Do you supply original Bently Nevada (Baker Hughes) product or aftermarket?

A: Konmask.com supplies genuine OEM Bently Nevada components. We do not sell uncertified aftermarket substitutes for safety-critical machinery protection applications.

Q: What is the minimum order quantity?

A: MOQ is 1 unit. We accommodate both single-unit emergency replacements and bulk procurement for plant turnarounds.

Q: Can you provide an export certificate of origin for customs clearance?

A: Yes. Full export documentation including commercial invoice, packing list, and certificate of origin is provided with every international shipment.

---

© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691

{
“@context”: “https://schema.org”,
“@graph”: [
{
“@type”: “Product”,
“name”: “Bently Nevada 330910-00-16-05-02-00 Proximity Transducer System”,
“description”: “Bently Nevada 330910-00-16-05-02-00 eddy-current proximity transducer system, 3300 XL Series. 5mm probe, 5m cable, -24VDC driver. API 670 compliant. For turbine, compressor, and rotating machinery vibration monitoring.”,
“sku”: “330910-00-16-05-02-00”,
“brand”: {
“@type”: “Brand”,
“name”: “Bently Nevada”
},
“manufacturer”: {
“@type”: “Organization”,
“name”: “Bently Nevada (Baker Hughes)”
},
“category”: “Proximity Transducer System”,
“url”: “https://konmask.com/products/bently-nevada-330910-00-16-05-02-00-proximity-transducer-system”,
“offers”: {
“@type”: “Offer”,
“priceCurrency”: “USD”,
“availability”: “https://schema.org/InStock”,
“seller”: {
“@type”: “Organization”,
“name”: “Konmask.com”
}
}
},
{
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “Is the 330910-00-16-05-02-00 a complete system or just the probe?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “It is a complete proximity transducer system, including the probe, 5-metre extension cable, and driver (Proximitor). All three components are calibrated as a matched set.”
}
},
{
“@type”: “Question”,
“name”: “Can this replace my existing 330910 series probe without recalibrating the monitor?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes — provided the replacement is a like-for-like 330910-00-16-05-02-00 with the same scale factor (200 mV/mil), no monitor recalibration is required. Always verify the driver output voltage at installation.”
}
},
{
“@type”: “Question”,
“name”: “Do you supply original Bently Nevada product or aftermarket?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Konmask.com supplies genuine OEM Bently Nevada components. We do not sell uncertified aftermarket substitutes for safety-critical machinery protection applications.”
}
},
{
“@type”: “Question”,
“name”: “What is the minimum order quantity?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “MOQ is 1 unit. We accommodate both single-unit emergency replacements and bulk procurement for plant turnarounds.”
}
},
{
“@type”: “Question”,
“name”: “Can you provide an export certificate of origin for customs clearance?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Yes. Full export documentation including commercial invoice, packing list, and certificate of origin is provided with every international shipment.”
}
}
] }
] }