Endress+Hauser FMU41-ARB2A2 Pulse Radar Level Transmitter | Replacement, Equivalent & Selection Guide
The Endress+Hauser FMU41-ARB2A2 is a compact, non-contact pulse radar level transmitter from the renowned Micropilot series, engineered for reliable continuous level measurement in liquids and bulk solids. Whether you are sourcing an original unit, seeking a compatible replacement, or evaluating alternatives, Konmask.com provides verified, traceable supply with global logistics support.
Technical Specifications
- Manufacturer: Endress+Hauser
- Model / SKU: FMU41-ARB2A2
- Series: Micropilot FMU41
- Measurement Principle: Pulse Radar (FMCW-compatible, non-contact)
- Frequency: approx. 6.3 GHz (C-band)
- Measuring Range: Up to 5 m (liquids) / 3 m (solids)
- Process Connection: Thread G 1½ / MNPT 1½
- Output Signal: 4–20 mA HART
- Supply Voltage: 10.5–36 V DC (2-wire)
- Enclosure Rating: IP67 / NEMA 4X
- Ambient Temperature: −40 to +80 °C
- Process Temperature: −40 to +80 °C
- Approvals: CE, ATEX (zone-dependent variant), SIL 2 capable
- Weight: approx. 2.0 kg
- Housing Material: Polycarbonate / Aluminium (variant-dependent)
Compatible Replacement & Equivalent Models
If the FMU41-ARB2A2 is discontinued, on long lead time, or outside budget, the following models offer functional equivalence or direct replacement capability:
- Endress+Hauser FMU42 – Next-generation Micropilot with extended range and improved diagnostics; direct upgrade path
- Endress+Hauser FMU43 – Enhanced version with SIL 2 certification and wider process temperature range
- Endress+Hauser FMU44 – High-performance variant for challenging media (foam, vapour, dust)
- VEGA VEGAPULS C 11 – 80 GHz compact radar; compatible 4–20 mA HART output; suitable for most liquid applications
- Siemens SITRANS LR100 – 2-wire loop-powered radar; equivalent output and process connection options
- Emerson Rosemount 5300 – Guided wave radar alternative for narrow tanks or agitated surfaces
Note: Always verify process conditions, flange dimensions, and output protocol before substituting. Contact Konmask.com for a free compatibility assessment.
Why Choose the Original FMU41-ARB2A2
- Proven field reliability in thousands of global installations since launch
- Seamless integration with Endress+Hauser FieldCare / DeviceCare and Asset Management systems
- Factory-calibrated and fully traceable to OEM quality standards
- Genuine spare parts and firmware updates available through authorised channels
- Consistent HART DD library support across all major DCS/PLC platforms
- Lower total cost of ownership vs. frequent replacement of lower-grade alternatives
Typical Applications
- Water and wastewater treatment – sumps, tanks, open channels
- Chemical storage – acids, alkalis, solvents in closed tanks
- Food & beverage – hygienic liquid level in process vessels
- Bulk solids – grain silos, powder hoppers, aggregate bins
- Oil & gas – produced water, condensate, fuel storage
- Utilities – cooling water towers, buffer tanks, fire suppression reservoirs
System Compatibility
- DCS: Siemens PCS 7, Honeywell Experion, ABB 800xA, Yokogawa CENTUM VP
- PLC: Siemens S7-300/400/1500, Allen-Bradley ControlLogix, Schneider Modicon M340/M580
- Asset Management: Endress+Hauser FieldCare, PACTware, AMS Device Manager
- Protocol: HART 5/6/7 (primary variable: level; secondary: distance, signal strength)
- Power Supply: Standard 24 V DC loop supply; compatible with all major I/O cards
Selection Guide
Use the table below to identify the right Micropilot variant for your application:
- FMU41-ARB2A2 – Standard liquid/solid, G 1½ thread, 4–20 mA HART, polycarbonate housing → General purpose, cost-effective
- FMU42-ARB2A2 – Extended range up to 10 m, aluminium housing → Larger tanks, outdoor installations
- FMU43-ARB2A2 – SIL 2, stainless process parts → Safety-critical, hygienic applications
- FMU44-ARB2A2 – High-frequency 26 GHz, narrow beam → Foam, vapour, dust-laden atmospheres
Not sure which model fits? Send your datasheet or P&ID to [email protected] and our engineers will recommend the optimal selection within 24 hours.
Quality Assurance & Sourcing
- All units sourced from authorised distributors or verified OEM-surplus channels
- Pre-shipment inspection: visual, label verification, and functional check where applicable
- Serialised traceability records retained for 5 years
- Packaging inspected and resealed to OEM standards before dispatch
- Certificate of Conformance (CoC) available on request
- Anti-counterfeit verification available for Endress+Hauser products via E+H serial number portal
How to Order
- Step 1: Confirm model number: FMU41-ARB2A2 (or specify your required variant)
- Step 2: State required quantity and delivery timeline
- Step 3: Submit enquiry via [email protected] or WhatsApp +0086 19859288691
- Step 4: Receive quotation with lead time, CoC availability, and shipping options within 24 hours
- Step 5: Confirm order and receive tracking within 1–2 business days of payment
We accept T/T bank transfer, PayPal, and major credit cards. Export documentation (commercial invoice, packing list, CO) provided for all international shipments.
Replacement & Compatibility FAQ
Q: Can the FMU41-ARB2A2 directly replace an older FMU40?
A: In most cases yes — the FMU41 series uses the same process connection and output signal. Verify housing dimensions and cable entry before installation.
Q: Is the FMU41-ARB2A2 suitable for ATEX Zone 1 environments?
A: The ARB2A2 ordering code is the standard non-Ex variant. For ATEX Zone 1, specify the FMU41-ARB2A2 Ex variant or contact us for the correct Ex ordering code.
Q: What is the difference between FMU41 and FMU42?
A: The FMU42 offers a longer measuring range (up to 10 m vs. 5 m for liquids), a more robust aluminium housing, and enhanced diagnostics. Both share the same HART output and process connection options.
Q: Can I use a VEGA or Siemens radar as a drop-in replacement?
A: Electrically yes (4–20 mA HART), but you will need to re-configure the HART DD in your DCS and verify the antenna beam angle and process connection dimensions match your nozzle.
Q: Do you supply calibration certificates?
A: Yes. Factory calibration certificates are available for new units. For refurbished stock, we provide inspection reports. Third-party calibration can be arranged on request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691











