Turbine Control Solution — GE DS200TCDAG1ADA | Mark V Digital I/O Board
Where This Product Is Used
The GE DS200TCDAG1ADA Digital I/O Board is a core control interface card deployed in GE Mark V and Mark VI turbine control systems. It is found in mission-critical applications across the following industries and environments:
- Power Generation Plants — Gas turbine and steam turbine control panels requiring high-density discrete I/O for trip logic, permissive sequencing, and alarm management.
- Oil & Gas Facilities — Compressor stations, LNG terminals, and offshore platforms where turbine-driven equipment demands reliable digital signal processing.
- Petrochemical & Refining — Process units using GE Frame 5, Frame 6, Frame 7, and Frame 9 turbines with Mark V TCDA-series I/O racks.
- Industrial Cogeneration — Combined heat and power (CHP) installations integrating GE turbine controllers with plant DCS via hardwired digital I/O.
- Marine & Offshore Power — Vessel propulsion and auxiliary power systems using GE turbine control architectures.
Technical Specifications
| Part Number | DS200TCDAG1ADA |
| Manufacturer | General Electric (GE) |
| Series | Mark V / Mark VI Turbine Control |
| Board Type | Digital I/O Board |
| Form Factor | PCB Card — TCDA Rack Mount |
| Digital Inputs | High-density discrete input channels (24 VDC / 125 VDC compatible) |
| Digital Outputs | Relay and solid-state output channels for trip and control signals |
| Communication | Backplane bus interface to Mark V TCCA/TCDA controller rack |
| Operating Temperature | 0°C to 60°C (standard industrial panel environment) |
| Weight | 980 g |
| Condition Available | New surplus / Tested refurbished / Exchange |
Note: Full electrical specifications are available in GE Mark V Application Manual GEH-5980. Contact us for the datasheet.
Why Engineers Specify This Model
- Drop-in Replacement Compatibility — Direct form-fit-function replacement for failed DS200TCDAG1ADA boards in existing Mark V racks without firmware reconfiguration.
- High Channel Density — Consolidates a large number of discrete I/O points on a single card, reducing rack space and wiring complexity in turbine control panels.
- Proven Field Reliability — Designed to GE’s stringent turbine control standards; widely deployed in baseload and peaking power plants globally for over two decades.
- Reduced Downtime Risk — Stocking a spare DS200TCDAG1ADA eliminates extended outages caused by long OEM lead times on legacy Mark V components.
- Broad Turbine Compatibility — Supports GE Frame 5 through Frame 9 gas turbines and associated steam turbine configurations running Mark V control.
Complete System Bill of Materials
The DS200TCDAG1ADA is typically specified alongside the following Mark V system components. Konmask.com stocks the full TCDA rack assembly:
- DS200TCDAG1ADA — Digital I/O Board (this item)
- DS200TCEAG1A — Excitation Analog I/O Board
- DS200TCQAG1A — Quad I/O Board
- DS200TCPSG1A — Power Supply Board
- DS200TCRAG1A — Relay Output Board
- DS200TCDAH1BHD — Digital I/O Board (alternate revision)
- DS200TCQCG1A — Quad Controller Board
- DS200TCPAG1A — Processor Board
Contact us to source a complete rack assembly or individual replacement cards.
Compliance & Industry Standards
- GE Mark V Design Standard — Manufactured and tested to GE turbine control system specifications (GEH-5980 series).
- IEC 61511 / IEC 61508 — Mark V systems are deployed in SIL-rated safety instrumented system (SIS) architectures at many facilities; consult your SIS engineer for SIL validation requirements.
- IEEE 1613 — Communication networking devices for substation environments (applicable to power plant control room installations).
- RoHS / WEEE — Surplus and refurbished units are handled and disposed of in compliance with applicable environmental regulations.
- CE Marking — Original GE manufacturing complies with applicable EU directives for industrial control equipment.
Quality Assurance & Sourcing
Konmask.com applies a structured quality process to every DS200TCDAG1ADA unit shipped:
- Visual Inspection — Board-level inspection for component damage, corrosion, burnt traces, and connector integrity.
- Functional Bench Test — Power-on verification and I/O channel continuity testing using GE-compatible test fixtures where applicable.
- Serialization & Traceability — Each unit is logged with its serial number, test date, and condition grade prior to dispatch.
- Anti-Static Packaging — Shipped in ESD-safe bags with foam cushioning and moisture barrier packaging for international transit.
- Warranty — 12-month warranty against defects in materials and workmanship on tested/refurbished units. New surplus units carry OEM warranty terms where applicable.
How to Source This Part
- Add to Cart — Place your order directly on Konmask.com for in-stock units with same-day or next-business-day dispatch.
- Request a Quote — For bulk orders, exchange programs, or specific revision requirements, email support@konmask.com with your quantity and delivery timeline.
- Emergency Procurement — Call or WhatsApp +0086 19859288691 for urgent turbine outage situations requiring expedited shipping.
- Exchange Program — Send your failed DS200TCDAG1ADA core for credit toward a tested replacement — reducing your net cost.
Application-Specific FAQ
Q: Is the DS200TCDAG1ADA compatible with both Mark V and Mark VI systems?
A: The DS200TCDAG1ADA is primarily a Mark V TCDA rack component. Mark VI uses a different I/O architecture (IS200 series). Confirm your rack model before ordering — contact us if unsure.
Q: Do I need to reconfigure the Mark V controller after replacing this board?
A: In most cases, a direct board swap does not require software reconfiguration if the replacement is the same revision. However, GE recommends verifying I/O calibration and performing a functional test after any board replacement.
Q: What is the lead time for this part?
A: In-stock units ship within 1–2 business days. For out-of-stock situations, typical sourcing lead time is 2–4 weeks. Contact us for real-time availability.
Q: Can Konmask.com supply a full TCDA rack assembly?
A: Yes. We stock individual boards and can assemble complete TCDA rack kits. Provide your rack configuration and we will quote a complete BOM.
Q: What warranty is provided?
A: Tested refurbished units carry a 12-month warranty. New surplus units are sold with OEM warranty terms. All units are inspected and tested before shipment.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


