Industrial Ethernet Communication Solution — GE IC695ETM001 | PACSystems RX3i
Where This Product Is Used
The GE IC695ETM001 Ethernet Module is purpose-built for demanding industrial environments where reliable, high-speed network communication is non-negotiable. Engineers and system integrators specify this module across a wide range of critical applications:
- Automotive Manufacturing: Real-time data exchange between PACSystems RX3i controllers and MES/SCADA systems on assembly lines, enabling traceability and OEE monitoring.
- Oil & Gas Processing: Connecting remote PAC controllers to DCS networks via Modbus TCP for pipeline monitoring, valve control, and safety interlock systems.
- Power Generation & Utilities: Integrating RX3i racks into plant-wide Ethernet backbones for substation automation and load management.
- Water & Wastewater Treatment: Supervisory communication between distributed RX3i controllers and central SCADA platforms over standard Ethernet infrastructure.
- Food & Beverage Processing: High-availability network connectivity for batch control systems requiring deterministic communication and minimal downtime.
- Pharmaceutical Manufacturing: Validated network communication in GMP environments where audit trails and data integrity are regulatory requirements.
- Material Handling & Logistics: Coordinating conveyor, sortation, and warehouse automation systems through centralized Ethernet-based control architectures.
Technical Specifications
| Part Number | IC695ETM001 |
| Manufacturer | GE (General Electric / GE Fanuc / Emerson) |
| Series | PACSystems RX3i |
| Module Type | Ethernet Communications Module |
| Network Ports | 2 × RJ-45 (10/100 Mbps, auto-negotiation) |
| Supported Protocols | SRTP, Modbus TCP, EGD (Ethernet Global Data), FTP, HTTP, SNMP |
| Max Connections | 32 simultaneous Ethernet connections |
| Backplane Interface | RX3i Universal Backplane (IC695CHS012 / IC695CHS016) |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% non-condensing |
| Power Consumption | 3.3W typical |
| Weight | 240 g |
| Firmware Compatibility | PME 7.0 and above |
| Form Factor | Single-slot RX3i module |
Why Engineers Specify This Model
- Dual-Port Flexibility: Two independent 10/100 Mbps Ethernet ports allow simultaneous connection to separate network segments — e.g., plant floor and enterprise network — without additional switches or media converters.
- Protocol Breadth: Native support for SRTP (GE’s proprietary high-performance protocol), Modbus TCP (universal interoperability), and EGD (peer-to-peer broadcast) covers virtually all industrial communication scenarios in a single module.
- Deterministic EGD Performance: Ethernet Global Data enables time-stamped, scheduled data exchange between RX3i controllers with sub-millisecond jitter — critical for synchronized multi-axis or multi-rack control.
- Drop-In Compatibility: Occupies a single universal backplane slot with no special rack position requirements, simplifying system expansion and replacement.
- Proven Field Reliability: Widely deployed in continuous-process industries since its introduction; extensive installed base means proven MTBF data and readily available field expertise.
- Integrated Web Server: Built-in HTTP server provides browser-based diagnostics and module status without additional software licenses.
Complete System Bill of Materials
A typical PACSystems RX3i Ethernet communication node requires the following components:
- IC695ETM001 — Ethernet Communications Module (this item)
- IC695CPU310 / IC695CPU315 / IC695CPU320 — RX3i CPU Module (select per processing requirement)
- IC695CHS012 / IC695CHS016 — RX3i Universal Backplane (12-slot or 16-slot)
- IC695PSA040 / IC695PSD040 — RX3i Power Supply (AC or DC input)
- IC695ACC400 — Backplane Expansion Cable (for multi-rack configurations)
- Standard CAT5e/CAT6 Ethernet Cable — Field-supplied
- GE Proficy Machine Edition (PME) v7.0+ — Programming and configuration software
Contact support@konmask.com for complete system quotations including all required components.
Compliance & Industry Standards
- CE Marking — European conformity for EMC and Low Voltage Directives
- UL Listed — UL 508 (Industrial Control Equipment)
- RoHS Compliant — Restriction of Hazardous Substances Directive 2011/65/EU
- IEEE 802.3 — Ethernet standard compliance (10BASE-T / 100BASE-TX)
- IEC 61131-2 — Programmable controllers: equipment requirements and tests
- ATEX / IECEx — Consult factory for hazardous location installation requirements
Quality Assurance & Sourcing
Konmask.com sources the IC695ETM001 exclusively through verified industrial automation distributors and authorized channel partners. Every unit offered undergoes the following quality process:
- Visual Inspection: Board-level examination for physical damage, counterfeit indicators, and label authenticity verification.
- Firmware Version Check: Confirmed against GE’s published firmware revision history prior to shipment.
- Functional Test (where applicable): Power-on and communication handshake testing on RX3i backplane test fixtures.
- Traceability Documentation: Country of origin, lot code, and supply chain documentation available upon request for regulated industries.
- Warranty: 12-month replacement warranty against manufacturing defects. Extended warranty options available — contact us for details.
How to Source This Part
- Add to Cart — For standard in-stock units with immediate dispatch.
- Request a Quote — Email support@konmask.com with your required quantity, delivery timeline, and any documentation requirements (COO, test reports, etc.).
- Bulk / Project Orders — For BOM-level procurement of complete RX3i systems, our team provides consolidated quotations with lead-time commitments.
- Expedite Requests — Same-day quotation available for urgent plant-down or shutdown situations. Call +0086 19859288691 directly.
We ship globally with DHL Express, FedEx International Priority, and sea freight consolidation for large orders. Export documentation (commercial invoice, packing list, COO) provided as standard.
Application-Specific FAQ
Q: Can the IC695ETM001 communicate with third-party PLCs or SCADA systems?
A: Yes. Via Modbus TCP, the IC695ETM001 interoperates with virtually any SCADA platform (Wonderware, iFIX, Ignition, WinCC) and third-party PLCs that support the Modbus TCP client/server protocol.
Q: How many IC695ETM001 modules can be installed in a single RX3i rack?
A: Multiple ETM001 modules can coexist in the same backplane, subject to total backplane power budget. Each module occupies one universal slot. Consult GE’s PACSystems RX3i System Manual (GFK-2314) for power budget calculations.
Q: Is the IC695ETM001 compatible with the older Series 90-30 or VersaMax systems?
A: No. The IC695ETM001 is designed exclusively for the PACSystems RX3i backplane. For Series 90-30 Ethernet communication, refer to the IC693CMM321. For VersaMax, refer to the IC200ETM001.
Q: What is the maximum cable length for each Ethernet port?
A: Per IEEE 802.3 standard, maximum segment length is 100 meters (328 ft) using CAT5e or better UTP cable. Fiber media converters can extend this for long-distance plant floor runs.
Q: Can I use this module for PROFINET or EtherNet/IP communication?
A: The IC695ETM001 does not natively support PROFINET or EtherNet/IP. For EtherNet/IP connectivity on RX3i, refer to the IC695EIS001 (EtherNet/IP Scanner) module.
Q: What programming software is required to configure this module?
A: GE Proficy Machine Edition (PME) version 7.0 or higher is required for hardware configuration and ladder/function block programming. The module’s web server provides runtime diagnostics without additional software.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






