GE IS200ISBBG1AAA Bus Bypass Card | Replacement, Equivalent & Selection Guide
The GE IS200ISBBG1AAA is a Bus Bypass Card designed for GE’s Mark VI Turbine Control System. It provides critical bus bypass functionality to maintain system continuity during maintenance or fault isolation. Konmask.com supplies genuine and compatible-grade IS200ISBBG1AAA modules for industrial automation engineers worldwide.
Technical Specifications
- Part Number: IS200ISBBG1AAA
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control
- Function: Bus Bypass Card
- Form Factor: PCB Card Module
- Weight: 970 g (approx.)
- Condition Available: New, Refurbished, Tested
- Compatibility: GE Mark VI / Mark VIe Control Systems
- Communication Bus: IONet / ARCNET (Mark VI architecture)
- Operating Environment: Industrial control cabinet, DIN-rail or card rack mount
Compatible Replacement & Equivalent Models
When the IS200ISBBG1AAA is unavailable or end-of-life, the following models may serve as functional equivalents or drop-in replacements depending on your system revision:
- IS200ISBBG1A – Base revision, functionally equivalent in most Mark VI configurations
- IS200ISBBG1B – Revised PCB layout, same electrical interface
- IS200ISBBG1AAB – Minor firmware variant; verify firmware compatibility before substitution
- IS215ISBBG1A – Mark VIe series equivalent; confirm rack and backplane compatibility
- DS200ISBBG1A – Legacy Mark V equivalent; not directly interchangeable without engineering review
⚠ Always verify part revision, firmware version, and backplane slot compatibility before substitution. Contact Konmask.com engineering support for cross-reference validation.
Why Choose the Original IS200ISBBG1AAA
- ✅ Factory-validated for GE Mark VI control architecture
- ✅ Guaranteed pin-compatible with original backplane connectors
- ✅ Supports GE Toolbox configuration without firmware re-flashing
- ✅ Minimizes commissioning risk in safety-critical turbine applications
- ✅ Traceable serial number and manufacturing lot for audit compliance
Typical Applications
- Gas turbine and steam turbine control panels (GE Frame 5, 6, 7, 9)
- Combined-cycle power plant automation
- Compressor station control systems
- Offshore platform turbine control upgrades
- Industrial plant DCS/PLC hybrid architectures using GE Mark VI
System Compatibility
| System | Compatible | Notes |
|---|---|---|
| GE Mark VI | ✅ Yes | Primary target platform |
| GE Mark VIe | ⚠ Verify | Check IS215 series for direct fit |
| GE Mark V | ❌ No | Different bus architecture |
| GE Mark IV | ❌ No | Not compatible |
| Third-party DCS | ❌ No | GE proprietary bus protocol |
Selection Guide
Use the following criteria to confirm IS200ISBBG1AAA is the correct module for your application:
- Step 1 – Identify your Mark VI panel revision (R, S, or T series backplane)
- Step 2 – Confirm slot assignment in your GE Toolbox I/O configuration file
- Step 3 – Check firmware baseline – IS200ISBBG1AAA requires Mark VI firmware ≥ R04.x
- Step 4 – Verify bus termination – Ensure IONet bus termination resistors are correctly set
- Step 5 – Cross-reference with BOM – Match against your original GE engineering BOM for exact suffix (AAA)
Not sure which revision you need? Send your panel nameplate photo or GE Toolbox export to [email protected] for a free selection review.
Quality Assurance & Sourcing
- All IS200ISBBG1AAA units sourced through verified industrial surplus and authorized distribution channels
- 100% functional test performed prior to shipment (power-on, bus communication, I/O signal verification)
- Anti-static packaging with humidity indicator card
- Certificate of conformance (CoC) available upon request
- 90-day warranty on all tested units; 12-month warranty on new-in-box stock
How to Order
- Add IS200ISBBG1AAA to cart and proceed to checkout, or
- Email [email protected] with your PO and required quantity
- For urgent requirements, call/WhatsApp: +0086 19859288691
- Lead time: In-stock units ship within 1–3 business days; EXW Xiamen, China
- Payment: T/T, PayPal, credit card, and trade assurance accepted
Replacement & Compatibility FAQ
Q: Can IS200ISBBG1AAA replace IS200ISBBG1A directly?
A: In most Mark VI systems, yes. The AAA suffix denotes a minor PCB revision. Functional behavior is identical. Confirm with your GE Toolbox configuration file.
Q: Is IS200ISBBG1AAA compatible with Mark VIe?
A: Mark VIe uses the IS215 series. IS200ISBBG1AAA may physically fit but is not officially supported. Use IS215ISBBG1A for Mark VIe applications.
Q: Do you provide a test report?
A: Yes. A functional test report is available for all refurbished units. Request it at time of order.
Q: What is the lead time for new-in-box stock?
A: New-in-box IS200ISBBG1AAA typically ships within 5–10 business days depending on availability. Contact us to confirm current stock.
Q: Can I return the module if it doesn’t fit my system?
A: Yes, within 30 days of receipt, subject to our returns policy. Module must be unused and in original packaging.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
