GE IS200TVIBH2BCC Vibration Terminal Board | Replacement, Equivalent & Selection Guide
The GE IS200TVIBH2BCC is a Vibration Terminal Board designed for use in GE Mark VI Turbine Control Systems. It serves as the primary interface for vibration and dynamic signal conditioning, connecting proximity probes and accelerometers to the Mark VI control platform. Konmask.com supplies new, refurbished, and equivalent replacement units with full traceability and quality verification.
Technical Specifications
- Part Number: IS200TVIBH2BCC
- Manufacturer: GE (General Electric)
- Series: Mark VI Turbine Control
- Function: Vibration Terminal Board
- Signal Type: Proximity probe / accelerometer inputs
- Form Factor: PCB terminal board module
- Weight: ~800 g
- Compatible System: GE Mark VI, Mark VIe
- Condition Available: New OEM / Refurbished / Equivalent
Compatible Replacement & Equivalent Models
If the IS200TVIBH2BCC is unavailable or cost-prohibitive, the following models may serve as functional equivalents depending on your system revision and wiring configuration. Always verify firmware and hardware revision compatibility before substitution.
- IS200TVIBH2ACC – Earlier revision; same functional role, minor BOM differences
- IS200TVIBH2DCC – Later revision with enhanced EMI shielding
- IS200TVIBH1BCC – Single-channel variant; verify channel count requirements
- IS200TSVOH1B – Servo terminal board; cross-reference only if vibration I/O is remapped
- Third-party compatible boards from approved Mark VI aftermarket suppliers (contact us for cross-reference)
Note: Revision suffix (A/B/C/D) affects hardware compatibility. Confirm with your GE Mark VI system documentation before ordering.
Why Choose the Original IS200TVIBH2BCC
- Factory-validated signal conditioning for GE Mark VI vibration channels
- Guaranteed pin-for-pin compatibility — no rewiring required
- Supports full diagnostic and trip logic within the Mark VI architecture
- Traceable serial number for OEM warranty and service records
- Minimizes commissioning risk in critical turbine protection applications
Typical Applications
- Gas turbine vibration monitoring (shaft, bearing, casing)
- Steam turbine proximity probe interfacing
- Compressor train vibration protection systems
- Power generation plant DCS/turbine control upgrades
- Retrofit and spare-parts programs for aging Mark VI installations
System Compatibility
- Primary: GE Mark VI Turbine Control System
- Secondary: GE Mark VIe (verify I/O mapping)
- Not compatible with: Mark V, Mark IV without adapter hardware
- Software: Works with GE Toolbox / ControlST configuration environment
Selection Guide
Use the table below to select the correct vibration terminal board for your application:
- Standard Mark VI vibration I/O, dual-channel: IS200TVIBH2BCC ✓ (this model)
- Need enhanced EMI protection: Consider IS200TVIBH2DCC
- Single-channel application: IS200TVIBH1BCC
- Budget-sensitive / refurbished acceptable: Contact Konmask for tested refurbished IS200TVIBH2BCC stock
- Unsure of revision: Provide your Mark VI cabinet serial number — we will cross-reference for you
Quality Assurance & Sourcing
- All units inspected and tested prior to shipment
- Refurbished units include functional burn-in test report
- Original OEM units supplied with manufacturer traceability documentation
- Packaging: ESD-safe anti-static bag + foam-lined carton
- Export compliance: HTS / HS code verified for international shipments
- Lead time: In-stock units ship within 1–3 business days; sourced units 5–15 business days
How to Order
- Confirm your part number: IS200TVIBH2BCC (check revision suffix on existing board label)
- Select condition: New OEM / Refurbished / Equivalent
- Add to cart or contact us for bulk / urgent orders
- Provide PO number or project reference for B2B invoicing
- We issue proforma invoice within 24 hours for wire transfer / LC payment
📧 Email: support@konmask.com | 📞 Phone/WhatsApp: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can IS200TVIBH2ACC replace IS200TVIBH2BCC?
A: In most cases yes — the ACC and BCC revisions share the same circuit topology. Verify with your GE Mark VI system integrator before swapping.
Q: Is a refurbished unit safe for turbine protection applications?
A: Yes, when sourced from a reputable supplier with documented functional testing. Konmask provides test reports for all refurbished units.
Q: Do you supply the full Mark VI I/O board set?
A: Yes. We stock a wide range of Mark VI terminal boards, I/O packs, and controllers. Contact us with your full BOM for a consolidated quote.
Q: What is the lead time for new OEM units?
A: In-stock: 1–3 business days. If sourcing from distribution: 5–15 business days. Expedited options available.
Q: Can you help identify the correct replacement if I only have the cabinet model?
A: Yes. Provide your Mark VI cabinet serial number or system drawing number and we will identify the correct board revision.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
