Turbine & Excitation Control Solution — GE IS210AEAAH1BKE | IS210AEAAH1
Where This Product Is Used
The GE IS210AEAAH1BKE (also referenced as IS210AEAAH1) is a dedicated Turbine & Excitation Control board deployed in GE Mark VI and Mark VIe turbine control systems. It is found in the following industrial environments:
- Gas Turbine Power Plants — Manages excitation feedback loops and turbine speed regulation in combined-cycle and simple-cycle gas turbine units.
- Steam Turbine Facilities — Provides closed-loop excitation control for steam-driven generators in utility and cogeneration plants.
- Hydroelectric Stations — Interfaces with generator excitation systems to maintain voltage stability and reactive power output.
- Industrial Co-generation Plants — Supports synchronization and load-sharing between on-site generators and the utility grid.
- Oil & Gas Processing Facilities — Controls compressor-drive turbines where precise speed and excitation management is critical to process safety.
- LNG Terminals & Refineries — Deployed in turbine-driven booster compressors requiring SIL-rated excitation control.
Technical Specifications
| Attribute | Value |
|---|---|
| Manufacturer | General Electric (GE) |
| Part Number | IS210AEAAH1BKE |
| Alternate Reference | IS210AEAAH1 |
| Series / Platform | Mark VI / Mark VIe Turbine Control |
| Module Function | Turbine & Excitation Control Board |
| Form Factor | VME / Rack-mount PCB Assembly |
| Weight | 520 g (approx.) |
| Communication Interface | IONet / Ethernet (Mark VIe) |
| Operating Temperature | 0 °C to +60 °C |
| Power Supply | 24 VDC (via backplane) |
| Redundancy Support | TMR (Triple Modular Redundancy) capable |
| Condition Available | New / Refurbished / Tested Surplus |
Note: Specifications are based on published GE Mark VI documentation. Confirm exact revision requirements with your GE system integrator before ordering.
Why Engineers Specify This Model
- Proven TMR Architecture — The IS210AEAAH1BKE is designed for Triple Modular Redundancy configurations, providing fault-tolerant excitation control with no single point of failure.
- Direct OEM Replacement — Drop-in compatible with existing Mark VI / Mark VIe racks; no firmware re-flashing required when replacing a like-for-like board.
- Tight Excitation Loop Performance — Delivers fast closed-loop response times critical for generator AVR (Automatic Voltage Regulator) stability during load transients.
- Long Field Life — GE Mark VI hardware is engineered for 20+ year service life in continuous-duty power generation environments.
- Broad Compatibility — Interfaces with GE EX2100, EX2100e, and LCI excitation systems commonly found in combined-cycle plants.
- Reduced Downtime Risk — Sourcing a tested spare from Konmask.com ensures rapid swap-out during unplanned outages, minimizing generation loss.
Complete System Bill of Materials
The IS210AEAAH1BKE typically operates alongside the following Mark VI / Mark VIe components. Konmask.com can source the complete BOM:
- IS215VCMIH2B — VME Communication Module
- IS200TREGH1B — Turbine Reference & Excitation Gate Driver Board
- IS210BPPCH1A — Backplane Power & Protection Card
- IS200EPCTG1A — Excitation Protection & Control Terminal Board
- IS215ACLEH1A — AC Line Excitation Interface Module
- DS200TCQAG1BHF — Turbine Control Quad Analog I/O Board
- IS200TSVOH1A — Turbine Servo Output Module
Contact support@konmask.com for bundle pricing on multi-module BOM orders.
Compliance & Industry Standards
- IEC 61511 — Functional Safety for Process Industry Sectors (SIL-rated excitation control loops)
- IEC 61508 — Functional Safety of E/E/PE Safety-related Systems
- IEEE Std 421.5 — Recommended Practice for Excitation System Models for Power System Stability Studies
- NERC CIP — Compatible with NERC Critical Infrastructure Protection cybersecurity frameworks when deployed in utility environments
- CE Marking — GE Mark VI hardware carries CE conformity for EU installations
- RoHS — Compliant per GE product documentation (verify revision-specific status with GE)
Quality Assurance & Sourcing
At Konmask.com, every IS210AEAAH1BKE unit goes through a structured quality process before shipment:
- Visual Inspection — PCB examined for physical damage, corrosion, burnt components, and connector integrity.
- Functional Bench Test — Module powered and tested against GE Mark VI diagnostic routines where test fixtures are available.
- Firmware Version Verification — Revision label and firmware stamp documented and disclosed to buyer prior to shipment.
- Anti-Static Packaging — Shipped in ESD-safe bags with foam cushioning inside double-wall cartons.
- Traceability Documentation — Certificate of conformance and test report available upon request for MRO and insurance purposes.
- 90-Day Warranty — All tested surplus units carry a 90-day warranty against DOA or functional failure under normal operating conditions.
How to Source This Part
- Confirm your Mark VI / Mark VIe rack slot and revision requirement — Check the existing board label or GE ToolboxST configuration for the exact part suffix (e.g., H1BKE vs H1AKE).
- Submit an RFQ — Email support@konmask.com or call +0086 19859288691 with your PO number, required quantity, and delivery deadline.
- Receive quotation within 24 hours — Konmask provides itemized pricing, lead time, and available condition (new / refurbished / tested surplus).
- Order confirmation & payment — Supports T/T bank transfer, PayPal, and trade assurance for international B2B buyers.
- Shipping & tracking — DHL / FedEx express available for urgent orders; sea freight for bulk BOM orders. Full tracking provided.
Application-Specific FAQ
Q: Is the IS210AEAAH1BKE compatible with both Mark VI and Mark VIe systems?
A: The IS210AEAAH1 base board is used across Mark VI and early Mark VIe platforms. The BKE suffix denotes a specific hardware revision. Always verify the suffix against your GE ToolboxST project file before ordering.
Q: Can this board be used as a hot-standby spare in a TMR configuration?
A: Yes. In a TMR Mark VI system, the IS210AEAAH1BKE can be installed as the R, S, or T controller board. GE’s voting logic will automatically detect and isolate a failed board without process interruption.
Q: What is the typical lead time for a tested surplus unit?
A: In-stock units typically ship within 1–3 business days. If not in stock, Konmask’s sourcing network can locate units within 5–10 business days for most GE Mark VI part numbers.
Q: Do you provide a test report with the shipment?
A: Yes. A functional test report and visual inspection checklist are available upon request at no additional charge. Certificate of conformance is also available for MRO documentation requirements.
Q: Can Konmask source the full Mark VI BOM for a plant overhaul?
A: Absolutely. Konmask.com specializes in complete Mark VI / Mark VIe BOM sourcing for planned outages and plant overhauls. Contact us with your full parts list for consolidated pricing.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
