GE IS210MACCH1AKH IS210BPPBH2CAA Backup Protection Module | Replacement, Equivalent & Selection Guide
The GE IS210MACCH1AKH paired with IS210BPPBH2CAA forms the Backup Protection Module assembly used in GE Mark VIe turbine control systems. Designed for mission-critical redundancy in gas and steam turbine applications, this module ensures continuous protection and failover capability when primary control paths are compromised. Sourced and verified by Konmask.com for industrial automation buyers worldwide.
Technical Specifications
- Manufacturer: GE (General Electric)
- Series: Mark VIe
- Part Numbers: IS210MACCH1AKH / IS210BPPBH2CAA
- Function: Backup Protection Module
- Weight: 2,900 g (approx.)
- Application: Gas turbine, steam turbine, combined-cycle plant control
- Communication: IONet / Ethernet-based Mark VIe backplane
- Mounting: Mark VIe rack-compatible
- Operating Environment: Industrial grade, DIN rail / rack mount
- Country of Origin: USA
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents. Always verify firmware revision and hardware compatibility before substitution:
- IS210MACCH1AEH – earlier hardware revision, same functional role
- IS210MACCH1AAH – alternate suffix variant
- IS210BPPBH1CAA – prior revision of the BPP board
- IS210BPPBH2CAB – updated revision with minor firmware changes
- IS215MACCH1AKH – Mark VIeS series equivalent (verify system compatibility)
Note: Suffix letters (e.g., AKH, CAA) denote hardware revision and configuration. Always cross-reference with your GE Mark VIe system BOM before ordering a replacement.
Why Choose the Original Model
- Factory-validated firmware and hardware revision matching your Mark VIe system
- Full OEM traceability and documentation support
- Guaranteed compatibility with GE Toolbox configuration software
- Minimizes re-commissioning risk in live turbine environments
- Preferred by OEM service teams for warranty-covered repairs
Typical Applications
- Gas turbine backup protection and trip logic
- Steam turbine overspeed and flame-out protection
- Combined-cycle power plant DCS redundancy
- Compressor station emergency shutdown (ESD) systems
- LNG plant turbine control backup
System Compatibility
- Primary System: GE Mark VIe Turbine Control System
- Compatible Racks: IS200 / IS210 series Mark VIe I/O racks
- Software: GE Toolbox (ToolboxST)
- Communication Protocol: IONet (proprietary GE Ethernet)
- Not compatible with: Mark V, Mark VI (without hardware adapter), or third-party DCS platforms without gateway
Selection Guide
Use the checklist below to confirm the correct module for your application:
- ✅ Confirm your Mark VIe system revision (R01, R02, etc.) via ToolboxST
- ✅ Match the hardware suffix (e.g., AKH) to your existing BOM or spare parts list
- ✅ Verify IS210MACCH1AKH (MACC board) and IS210BPPBH2CAA (BPP board) are both required as a set
- ✅ Check firmware version compatibility before hot-swap replacement
- ✅ Consult GE Mark VIe system manual GEH-6721 for slot assignment and wiring
Quality Assurance & Sourcing
- All modules at Konmask.com are inspected prior to shipment
- Sourced from authorized distributors, OEM surplus, and verified industrial channels
- Each unit ships with basic functional test documentation
- Packaging: anti-static ESD bag + foam-protected carton
- Warranty: 90-day replacement warranty on all stocked units
How to Order
- Add the module to your cart or contact us directly for bulk/project pricing
- Provide your system revision and application details for compatibility confirmation
- Our team will verify stock, lead time, and shipping options within 24 hours
- Expedited shipping available for urgent plant maintenance needs
📧 Email: support@konmask.com
📞 Phone/WhatsApp: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can IS210MACCH1AEH replace IS210MACCH1AKH?
A: In most cases yes, but the AKH revision includes hardware updates. Confirm with your GE service engineer before substitution.
Q: Do I need to replace both IS210MACCH1AKH and IS210BPPBH2CAA together?
A: These two boards function as a paired assembly. Replacing only one may cause initialization errors. We recommend replacing as a set.
Q: Is this module compatible with Mark VI (not Mark VIe)?
A: No. Mark VI and Mark VIe use different backplane architectures. IS210-series modules are Mark VIe specific.
Q: What is the lead time for this module?
A: In-stock units ship within 1–3 business days. Out-of-stock items typically have a 2–6 week lead time. Contact us for current availability.
Q: Can Konmask.com provide a test report?
A: Yes. Basic functional test documentation is included. Full factory test reports (FAT) are available upon request for OEM-sourced units.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
