GE GEVW-202AL-A Vibration Sensor | Replacement, Equivalent & Selection Guide
The GE GEVW-202AL-A is an industrial-grade vibration sensor designed for continuous machinery health monitoring in demanding automation and process control environments. This page provides full technical specifications, verified compatible replacements, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Manufacturer: GE (General Electric)
- Part Number: GEVW-202AL-A
- Type: Vibration / Velocity Sensor
- Output Signal: Analog (mV/mm/s or mV/in/s, model-dependent)
- Measurement Range: 0–50 mm/s RMS (typical)
- Frequency Response: 10–1000 Hz
- Supply Voltage: 18–30 VDC
- Operating Temperature: -40°C to +120°C
- Protection Rating: IP67
- Connector: M12 / Flying lead (verify with datasheet)
- Housing Material: Stainless steel
- Mounting: Threaded stud or magnetic base
- Certifications: CE, RoHS compliant
Note: Always verify specifications against the official GE datasheet for your specific revision. Contact us if you need the datasheet.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional equivalents or drop-in replacements for the GEVW-202AL-A. Compatibility depends on your system’s wiring, mounting, and signal conditioning requirements — consult the selection guide below before substituting.
| Brand | Model | Compatibility Notes |
|---|---|---|
| GE Bently Nevada | 330500-02-00 | Same GE ecosystem; verify connector pinout |
| Emerson / CSI | A0760-01 | Analog output; confirm frequency range |
| Wilcoxon Sensing | 786A | IEPE type; requires signal conditioner check |
| PCB Piezotronics | 603C01 | 4–20 mA loop; wiring adaptation may be needed |
| Hansford Sensors | HS-100S | Cost-effective alternative; IP67 rated |
Need a confirmed cross-reference? Send us your system model and we will verify compatibility before shipment.
Why Choose the Original Model
- Guaranteed system compatibility: Designed and validated for GE monitoring systems — no signal conditioning adjustments required.
- Proven reliability: Factory-calibrated with traceable QC documentation.
- Reduced commissioning risk: Drop-in fit for existing GE installations with no firmware or parameter changes.
- Long-term support: OEM spare parts availability and GE technical documentation.
- Regulatory compliance: CE and RoHS certified for global deployment.
Typical Applications
- Rotating machinery health monitoring (pumps, motors, compressors, fans)
- Predictive maintenance (PdM) programs
- Turbine and generator vibration monitoring
- Process plant condition monitoring systems
- OEM machine builder integration
- Offshore and heavy industrial environments
System Compatibility
The GEVW-202AL-A is designed for integration with GE condition monitoring platforms and is also compatible with third-party systems that accept standard analog vibration sensor inputs. Verified compatible systems include:
- GE System 1 / System 1 Evolution (S1E)
- GE Bently Nevada 3500 Series Machinery Protection System
- GE Bently Nevada 1900/65A General Purpose Equipment Monitor
- Third-party DCS/SCADA systems with 4–20 mA or mV analog input cards
- Portable vibration analyzers with standard BNC or M12 inputs
Selection Guide
Use the following criteria to confirm the GEVW-202AL-A is the right sensor for your application, or to select an appropriate alternative:
- Step 1 — Measurement type: Confirm whether you need velocity (mm/s), acceleration (g), or displacement (µm). The GEVW-202AL-A measures velocity.
- Step 2 — Frequency range: Verify your machinery’s fault frequencies fall within 10–1000 Hz. For low-speed machinery (<600 RPM), consider a displacement probe instead.
- Step 3 — Output signal: Match the sensor output (mV analog) to your monitoring system’s input card specification.
- Step 4 — Mounting: Confirm stud thread size and mounting surface. Magnetic base adapters are available.
- Step 5 — Environment: Verify operating temperature and IP rating against your installation conditions.
- Step 6 — Connector: Match the connector type (M12 / flying lead) to your existing cable infrastructure.
Not sure which model fits? Contact our technical team with your system model number and we will recommend the correct sensor.
Quality Assurance & Sourcing
- Authentic parts only: All GE sensors supplied by Konmask.com are sourced from authorized distributors or verified surplus channels with full traceability.
- Inspection before shipment: Each unit undergoes visual and functional inspection prior to dispatch.
- Documentation available: Certificate of conformance, test reports, and original packaging available on request.
- Anti-counterfeit policy: We do not supply grey-market or counterfeit components. Provenance documentation provided on request.
- Warranty: 12-month warranty against manufacturing defects.
How to Order
- Online: Add to cart directly on this page.
- Email RFQ: Send your part number, quantity, and required delivery date to support@konmask.com.
- Phone / WhatsApp: +0086 19859288691
- Bulk / project orders: Request a formal quotation — volume pricing available.
- Lead time: In-stock items ship within 1–3 business days. Ex-stock lead times provided at inquiry.
- Export: We support international shipping with full export documentation (commercial invoice, packing list, COO).
Replacement & Compatibility FAQ
Q: Can I use a third-party replacement without recalibrating my monitoring system?
A: It depends on the replacement’s output sensitivity and signal type. If the sensitivity (mV/mm/s) differs from the original, your monitoring system alarm thresholds will need recalibration. We recommend using the original GE part or a verified equivalent with matching sensitivity.
Q: Is the GEVW-202AL-A still in production?
A: GE periodically updates its sensor lineup. Contact us to confirm current production status and available stock. We maintain surplus inventory of legacy GE parts.
Q: What is the difference between GEVW-202AL-A and GEVW-202AL-B?
A: Suffix revisions typically indicate connector, cable length, or sensitivity changes. Provide your full part number and system model for a precise cross-reference.
Q: Do you provide installation support?
A: We provide technical documentation and pre-sales application support. On-site installation services are not included but can be arranged through our partner network.
Q: Can I return the sensor if it is not compatible?
A: Yes, subject to our returns policy. Sensors must be unused and in original packaging. Contact us within 14 days of receipt.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
