Bently Nevada 330902-00-95-05-02-00 3300 NSv Proximity Probe | Replacement, Equivalent & Selection Guide
The Bently Nevada 330902-00-95-05-02-00 is a high-performance proximity probe from the 3300 NSv Series, engineered for continuous non-contact vibration and position measurement in rotating machinery. This guide covers technical specifications, compatible replacements, equivalent models, and selection criteria to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
- Part Number: 330902-00-95-05-02-00
- Series: Bently Nevada 3300 NSv
- Type: Eddy-Current Proximity Probe
- Cable Length: 5 m / 16 ft
- Tip Diameter: 5 mm
- Thread Size: M8 x 1.0
- Connector: 02 (standard)
- Sensitivity: 7.87 V/mm (200 mV/mil)
- Linear Range: 0.25 – 2.25 mm (10 – 90 mil)
- Operating Temperature: -35°C to +177°C
- Agency Approvals: CE, CSA, FM (Intrinsically Safe)
- Weight: ~800 g (probe + cable assembly)
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as replacements or equivalents for the 330902-00-95-05-02-00. Always verify system compatibility before substitution:
- 330902-00-95-05-02-05 – Same probe, 5 m armored cable variant
- 330902-00-95-05-02-CN – China-market equivalent, same electrical specs
- 330905-00-95-05-02-00 – 3300 NSv 8 mm probe, wider linear range (drop-in for some applications)
- 330780-90-00 – 3300 XL 8 mm probe (requires driver/conditioner check)
- Emerson 330902 Series – Post-acquisition part numbering; functionally identical
- Third-party 5 mm eddy-current probes – Must match sensitivity (200 mV/mil), thread (M8×1.0), and connector pinout
Note: Konmask supplies genuine Bently Nevada / Emerson parts. Contact us to confirm cross-reference compatibility for your specific system.
Why Choose the Original Model
- System-Certified Accuracy: Factory-calibrated to work with 3300 NSv drivers and Bently Nevada monitoring systems without recalibration
- Intrinsic Safety Ratings: FM/CSA-certified for hazardous area installations (Zone 0/1, Div. 1/2)
- Long-Term Reliability: Designed for 24/7 continuous operation in high-temperature, high-vibration environments
- OEM Warranty Compliance: Using genuine parts preserves system warranty and API 670 compliance
- Traceability: Full lot traceability and calibration certificates available on request
Typical Applications
- Steam and gas turbine shaft vibration monitoring
- Centrifugal compressor radial and axial position measurement
- Pump and motor bearing vibration surveillance
- Gearbox and expander rotor dynamics monitoring
- API 670-compliant machinery protection systems
System Compatibility
The 330902-00-95-05-02-00 probe is designed for use with the following Bently Nevada / Emerson systems:
- 3300 NSv Proximitor® Sensor (330180 series) – Primary driver
- 3500 Machinery Protection System – Via 3500/42M and 3500/40M modules
- System 1® Software – Full data integration
- Orbit 60 Series – Compatible with appropriate I/O modules
Not directly compatible with 3300 XL drivers without sensitivity verification.
Selection Guide
Use the table below to select the correct 330902 variant for your application:
- Cable Length: 05 = 5 m | 09 = 9 m | 14 = 14 m (extension cable required for longer runs)
- Tip Diameter: 5 mm standard for most turbine OEM brackets
- Connector Code: 02 = standard BNC-compatible; confirm with your junction box
- Armoring: Select armored variant (-05 suffix) for high-abrasion or outdoor routing
- Temperature Rating: Standard probe rated to 177°C; high-temp variants available for exhaust-zone installations
If your application requires a different cable length, connector, or temperature rating, contact our engineering team for a custom part number recommendation.
Quality Assurance & Sourcing
- All units sourced from authorized Emerson / Bently Nevada distribution channels or verified surplus with full traceability
- Pre-shipment inspection: visual, dimensional, and electrical continuity checks
- Calibration certificates and material test reports (MTR) available upon request
- Export-compliant packaging with ESD protection and moisture barrier
- Lead time: typically 3–10 business days; expedited options available
How to Order
- Confirm your part number: 330902-00-95-05-02-00
- Specify quantity and required delivery date
- Request calibration certificate or test report if needed
- Submit your PO or inquiry to support@konmask.com or call +0086 19859288691
- Receive order confirmation with lead time and tracking within 1 business day
Replacement & Compatibility FAQ
Q: Can I use a 330905 (8 mm) probe as a direct replacement for the 330902 (5 mm)?
A: Only if your mounting bracket accommodates the larger tip diameter. Electrical sensitivity is the same, but physical fit must be verified.
Q: Is the 330902-00-95-05-02-00 compatible with the 3500 system?
A: Yes, when used with the appropriate 3500 series I/O module and a compatible Proximitor sensor.
Q: Do you supply third-party equivalent probes?
A: We primarily supply genuine Bently Nevada / Emerson parts. Contact us if you need a cost-optimized alternative and we will advise on verified equivalents.
Q: What is the lead time for this part?
A: Typically 3–10 business days from order confirmation. Expedited shipping available.
Q: Can I get a calibration certificate?
A: Yes. Calibration certificates and lot traceability documents are available upon request at no additional charge.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
