Process Control & DCS Analog Input Solution – Honeywell 51196694-928/U1 | TDC 3000 / PlantScape Series
Where This Product Is Used
The Honeywell 51196694-928/U1 (alternate part number 9373-02305-004/A) Analog Input Module is purpose-built for distributed control systems (DCS) in continuous-process industries. Engineers specify this module in:
- Oil & Gas Refineries – monitoring pressure transmitters, flow meters, and temperature sensors across process units
- Chemical & Petrochemical Plants – acquiring 4–20 mA signals from field instruments in hazardous-area loops
- Power Generation Facilities – integrating analog measurements into Honeywell TDC 3000 and PlantScape supervisory layers
- Pulp & Paper Mills – continuous acquisition of process variables for quality and throughput control
- Pharmaceutical Manufacturing – validated analog signal conditioning in GMP-regulated environments
- Water & Wastewater Treatment – remote I/O analog acquisition in SCADA-integrated DCS architectures
Technical Specifications
- Part Number: 51196694-928/U1
- Alternate / Assembly P/N: 9373-02305-004/A
- Module Type: Analog Input (AI)
- Compatible Platform: Honeywell TDC 3000, PlantScape, Experion PKS (legacy I/O racks)
- Signal Type: 4–20 mA / 1–5 V analog process signals
- Form Factor: Card / module for Honeywell I/O rack
- Weight: 300 g (approx.)
- Country of Origin: USA
- Condition: New / Surplus / Refurbished (specify at inquiry)
Why Engineers Specify This Model
- Platform Continuity – direct drop-in replacement for aging TDC 3000 I/O racks without controller migration
- Dual Part Number Traceability – both 51196694-928/U1 and 9373-02305-004/A are cross-referenced for procurement and MRO accuracy
- Proven Field Reliability – Honeywell’s TDC 3000 platform has decades of installed base in tier-1 process facilities worldwide
- Reduced Downtime Risk – stocking a verified spare eliminates extended lead times during unplanned shutdowns
- Signal Integrity – hardware-level analog conditioning minimizes noise in long cable runs typical of large process plants
Complete System Bill of Materials
This module is typically deployed alongside the following Honeywell TDC 3000 / PlantScape components:
- Honeywell I/O Link Interface Module (ILM)
- Honeywell High-Performance Process Manager (HPM) or Basic Process Manager (BPM)
- Honeywell I/O Termination Assembly / Field Termination Panel
- Honeywell Power Supply Module (24 VDC rack power)
- Shielded twisted-pair field wiring (per ISA-5.1 standard)
- Honeywell Universal Control Network (UCN) coaxial cable and taps
Contact support@konmask.com for complete BOM sourcing assistance.
Compliance & Industry Standards
- Designed and tested to Honeywell factory specifications
- Compatible with IEC 61511 functional safety lifecycle requirements (SIL-rated loop design)
- Suitable for use in ISA-84 safety instrumented system (SIS) architectures when properly applied
- RoHS compliance status: consult datasheet revision for specific suffix
- CE / UL listing: per original Honeywell product certification (verify suffix /U1 for UL-listed variant)
Quality Assurance & Sourcing
Every unit sourced through Konmask.com undergoes the following verification process:
- Visual inspection for physical damage, corrosion, and counterfeit indicators
- Label and date-code authentication against Honeywell factory markings
- Functional bench test where applicable (surplus and refurbished units)
- Secure anti-static packaging with humidity indicator card
- Full traceability documentation available upon request
How to Source This Part
To request a quote or check real-time availability for the Honeywell 51196694-928/U1 / 9373-02305-004/A:
- 📧 Email: support@konmask.com
- 📞 Phone / WhatsApp: +0086 19859288691
- 🌐 Web: https://konmask.com
Provide your required quantity, acceptable condition (new / surplus / refurbished), and target delivery date. Expedited sourcing available for shutdown and turnaround (TAR) scenarios.
Application-Specific FAQ
Q: Is 51196694-928/U1 compatible with Experion PKS?
A: This module is native to TDC 3000 and PlantScape I/O racks. Experion PKS uses a different I/O architecture (Series C / CHARM). Consult your Honeywell system integrator for migration path options.
Q: What is the difference between 51196694-928/U1 and 9373-02305-004/A?
A: These are the same physical module — 51196694-928 is the Honeywell catalog part number and 9373-02305-004/A is the assembly drawing / revision number. Both appear on the module label.
Q: Can this module be used in a Safety Instrumented System (SIS)?
A: Only when the complete loop (sensor, module, logic solver, final element) is validated to the required SIL level per IEC 61511. Consult your functional safety engineer.
Q: What is the typical lead time?
A: In-stock units ship within 1–3 business days. Sourced surplus units typically ship within 5–10 business days. Contact us for urgent requirements.
Q: Do you provide a warranty?
A: Yes. Konmask.com provides a 90-day functional warranty on all tested surplus and refurbished units. New/sealed units carry the original manufacturer warranty.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
