Process Automation Control Solution — HONEYWELL 51405046-175 CC-PCNT01 | C300 Series
Where This Product Is Used
The HONEYWELL CC-PCNT01 C300 Controller Module (P/N 51405046-175) is a core processing unit deployed across demanding continuous and batch process industries. Engineers specify this module in environments where deterministic control, high-availability redundancy, and seamless integration with Experion PKS are non-negotiable.
- Oil & Gas: Upstream wellhead automation, midstream pipeline control, and downstream refinery DCS loops
- Petrochemical & Chemical Plants: Reactor temperature/pressure regulation, distillation column control, and safety interlock systems
- Power Generation: Boiler management systems (BMS), turbine governor control, and load-following applications
- Pulp & Paper: Digester control, bleach plant sequencing, and paper machine drive coordination
- Pharmaceutical & Life Sciences: FDA 21 CFR Part 11-compliant batch processing, CIP/SIP cycle automation
- Water & Wastewater Treatment: SCADA-integrated pump station control and chemical dosing loops
- Mining & Minerals: Flotation cell control, conveyor sequencing, and crusher automation
Technical Specifications
| Manufacturer | Honeywell Process Solutions |
| Part Number | 51405046-175 |
| Model / Catalog ID | CC-PCNT01 |
| Series | C300 Controller |
| Platform | Experion PKS (Process Knowledge System) |
| Controller Type | Process Controller Node — Primary / Redundant capable |
| Communication Bus | FTE (Fault Tolerant Ethernet) — dual-port |
| I/O Capacity | Up to 2,000 I/O points per controller node (with CIOM/RIOM expansion) |
| Execution Rate | Configurable scan rates from 100 ms to 1 s (standard loops) |
| Memory | Non-volatile flash; retains configuration on power loss |
| Power Supply | 24 VDC (supplied via C300 chassis backplane) |
| Operating Temperature | 0 °C to +60 °C |
| Humidity | 5% to 95% RH, non-condensing |
| Mounting | C300 Controller Carrier (CC-PCNT01 slots into CC-PCN001 / CC-PCN002 carrier) |
| Weight | 480 g (module only) |
| Certifications | CE, UL, cUL, ATEX (zone 2 with appropriate enclosure) |
| Firmware | Upgradeable via Experion PKS Engineering Console |
Why Engineers Specify This Model
- Native Redundancy: The CC-PCNT01 supports 1:1 hot-standby redundancy with bumpless transfer — critical for zero-downtime process environments. Switchover occurs in <100 ms without process upset.
- Experion PKS Deep Integration: Fully managed through Honeywell’s Experion engineering console. Control strategies, alarm management, and historian data flow natively without third-party middleware.
- Scalable I/O Architecture: Pairs with CIOM (Cabinet I/O Module) and RIOM (Remote I/O Module) to distribute I/O across the plant floor — reducing field wiring costs significantly.
- Deterministic Execution: Guaranteed scan-cycle execution ensures regulatory loops (PID, cascade, ratio) meet process response requirements even under peak load.
- Long Product Lifecycle: Honeywell’s commitment to 20+ year lifecycle support makes the C300 a low-risk platform choice for greenfield and brownfield projects alike.
- Cybersecurity Hardened: Supports role-based access control (RBAC) and encrypted FTE communications aligned with IEC 62443 industrial cybersecurity standards.
Complete System Bill of Materials
The CC-PCNT01 operates within the C300 controller subsystem. A complete, functional node typically requires the following components:
- CC-PCNT01 (51405046-175) — Controller Module (this item)
- CC-PCN001 / CC-PCN002 — C300 Controller Carrier (single or redundant)
- CC-PWR001 / CC-PWR002 — Power Supply Module for C300 chassis
- CC-TCNT01 — C300 Termination Assembly (FTE network connection)
- CIOM-A / CC-CIOM13 — Cabinet I/O Module (local I/O expansion)
- CC-RIOM01 — Remote I/O Module (field-distributed I/O)
- FTE Switch — Honeywell-qualified managed Ethernet switch for FTE backbone
- Experion PKS Server — Engineering / Operator Station with R500+ software
Contact support@konmask.com to source complete C300 system assemblies or individual replacement modules.
Compliance & Industry Standards
- IEC 61131-3 — Structured programming environment for control logic (Function Block, Ladder, Structured Text)
- IEC 62443 — Industrial cybersecurity framework compliance (network segmentation, access control)
- ISA-18.2 — Alarm management lifecycle support via Experion Alarm Management
- NAMUR NE 107 — Field device status signals integration via HART/FF I/O modules
- CE Marking — EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UL / cUL Listed — UL 508 Industrial Control Equipment
- ATEX Category 3G — Suitable for Zone 2 hazardous area installation with appropriate certified enclosure
- RoHS Compliant — Restriction of Hazardous Substances Directive 2011/65/EU
Quality Assurance & Sourcing
Konmask.com specializes in the procurement of genuine, traceable industrial automation components for MRO (Maintenance, Repair & Operations) and capital project requirements.
- Authenticity: All HONEYWELL modules are sourced from authorized distribution channels or verified surplus with full traceability documentation available on request.
- Inspection: Each unit undergoes visual inspection, label verification, and functional pre-shipment checks prior to dispatch.
- Packaging: Shipped in ESD-safe anti-static packaging with foam cushioning to prevent transit damage to sensitive electronics.
- Documentation: Certificate of Conformance (CoC) and packing list provided with every shipment. Calibration records available where applicable.
- Warranty: 12-month warranty against manufacturing defects. DOA (Dead on Arrival) replacement policy within 30 days of receipt.
How to Source This Part
Procurement of the HONEYWELL 51405046-175 CC-PCNT01 is straightforward through Konmask.com:
- Step 1 — Submit RFQ: Email support@konmask.com with your required quantity, delivery timeline, and project details. Include your P.O. number or project reference if available.
- Step 2 — Receive Quote: Our sourcing team will respond within 1 business day with pricing, lead time, and availability confirmation.
- Step 3 — Order Confirmation: Upon PO acceptance, we issue an order acknowledgment with estimated ship date.
- Step 4 — Shipment & Tracking: Units are dispatched via DHL / FedEx International Priority with full tracking. Export documentation (commercial invoice, packing list, HS code declaration) included.
- Step 5 — After-Sales Support: Our technical team is available post-delivery for installation guidance and compatibility queries.
Phone / WhatsApp: +0086 19859288691 | Email: support@konmask.com
Application-Specific FAQ
- Q: Can the CC-PCNT01 operate in a redundant configuration without additional hardware?
- A: Redundancy requires a second CC-PCNT01 module and the CC-PCN002 dual-slot carrier. Both modules must run identical firmware versions. The FTE network handles synchronization automatically.
- Q: Is the 51405046-175 compatible with older C200/C200E controllers?
- A: No. The C300 uses a different backplane architecture and FTE communication protocol. It is not backward-compatible with C200 carriers. Migration from C200 to C300 requires a carrier and termination assembly change.
- Q: What Experion PKS software version is required?
- A: The CC-PCNT01 requires Experion PKS R400 or later. For full feature support (including advanced cybersecurity features), R500+ is recommended.
- Q: Can this module be used in SIL-rated safety applications?
- A: The C300 CC-PCNT01 is a standard process controller, not a Safety Instrumented System (SIS) module. For SIL 1–3 applications, Honeywell’s Safety Manager SC (SM-SC) platform should be specified. The C300 can interface with Safety Manager via peer-to-peer FTE links.
- Q: What is the typical lead time for this part?
- A: In-stock units ship within 3–5 business days. For sourced/surplus units, lead time is typically 7–15 business days depending on global availability. Contact us for current stock status.
- Q: Do you provide installation or commissioning support?
- A: Konmask provides remote technical support for installation and configuration. On-site commissioning services can be arranged through our partner network — contact us for details.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






