Honeywell 8C-PAONA1 (51454469-175) Analog Output Module | Replacement, Equivalent & Selection Guide
The Honeywell 8C-PAONA1 (Part No. 51454469-175) is an 8-channel analog output module designed for use in Honeywell’s C300 Controller platform within the Experion PKS distributed control system (DCS). It delivers precision 4–20 mA current output signals to field devices such as control valves, positioners, and variable-speed drives. This page provides full technical specifications, compatible replacement options, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
- Part Number: 8C-PAONA1 / 51454469-175
- Manufacturer: Honeywell Process Solutions
- Module Type: Analog Output (AO)
- Number of Channels: 8 channels
- Output Signal: 4–20 mA current loop
- Output Resolution: 16-bit DAC
- Load Impedance: Up to 750 Ω per channel
- Isolation: Channel-to-channel and channel-to-bus isolation
- Communication Bus: C300 Series FIM (Field Interface Module) backplane
- Power Supply: Supplied via backplane (no external power required)
- Operating Temperature: 0°C to 60°C
- Humidity: 5% to 95% RH, non-condensing
- Dimensions: Standard C300 I/O module form factor
- Certifications: CE, UL, FM (Class I, Div 2)
- Platform Compatibility: Honeywell Experion PKS, C300 Controller
Compatible Replacement & Equivalent Models
When the original 8C-PAONA1 is unavailable, end-of-life, or cost-prohibitive, the following models may serve as functional replacements or equivalents. Always verify firmware, backplane, and FIM compatibility before substitution.
| Model | Manufacturer | Channels | Output Type | Compatibility Notes |
|---|---|---|---|---|
| 8C-PAONA1 51454469-175 | Honeywell | 8 CH | 4–20 mA AO | Original — direct fit for C300 platform |
| 51454469-175 (alternate label) | Honeywell | 8 CH | 4–20 mA AO | Same module, alternate part number format |
| 8C-PAONA2 | Honeywell | 8 CH | 4–20 mA AO + HART | Upgraded variant with HART communication support |
| CC-PAON01 / 51308366-175 | Honeywell | 8 CH | 4–20 mA AO | C300 Series — verify FIM slot compatibility |
| Yokogawa AAI543 | Yokogawa | 8 CH | 4–20 mA AO | Third-party equivalent; requires signal conditioning adapter |
Note: Third-party replacements require engineering validation. Konmask.com recommends using OEM or certified refurbished Honeywell modules for safety-critical applications.
Why Choose the Original Model
- Guaranteed Backplane Compatibility: Designed exclusively for the Honeywell C300 FIM backplane — no adapter or re-engineering required.
- Firmware Integrity: Fully supported by Experion PKS R500+ firmware with native diagnostics and loop health monitoring.
- Safety Compliance: Meets FM Class I, Div 2 and CE/UL certifications for hazardous area installations.
- Reduced Commissioning Risk: Plug-and-play replacement with zero configuration changes in the Experion Control Builder.
- Long-Term Support: Honeywell provides extended lifecycle support and spare parts availability through authorized channels.
Typical Applications
- Control valve positioner command signals in oil & gas processing plants
- Variable frequency drive (VFD) speed reference output in power generation
- Setpoint transmission to field-mounted PID controllers
- Analog output to I/P transducers in chemical and petrochemical facilities
- Burner management and boiler control systems
- Water treatment and municipal utility SCADA integration
- Pharmaceutical batch process control (FDA 21 CFR Part 11 environments)
System Compatibility
- DCS Platform: Honeywell Experion PKS (Process Knowledge System)
- Controller: C300 Process Controller
- Field Interface Module (FIM): Compatible with standard C300 FIM chassis
- Engineering Tool: Honeywell Control Builder (R400 and above)
- Communication Protocol: Proprietary Honeywell FTE (Fault Tolerant Ethernet) backplane bus
- HART Support: Not available on this model (see 8C-PAONA2 for HART variant)
- Redundancy: Supports module-level redundancy when paired with redundant FIM configuration
Selection Guide
Use the following criteria to confirm the 8C-PAONA1 is the right module for your application:
- ✔ Platform: Your system uses Honeywell Experion PKS with C300 controllers
- ✔ Signal Type: You require 4–20 mA analog output (not voltage output)
- ✔ Channel Count: 8 output channels per module meets your I/O density requirement
- ✔ HART Not Required: Field devices do not require HART communication (if HART is needed, select 8C-PAONA2)
- ✔ Environment: Installation is in a non-IS (non-intrinsically safe) zone or Class I Div 2 area
- ✔ Load: Field device loop impedance is ≤ 750 Ω per channel
If your requirements differ from the above, contact our technical team at support@konmask.com for a customized selection recommendation.
Quality Assurance & Sourcing
- Source: Konmask.com sources 8C-PAONA1 modules from authorized distributors, certified refurbishers, and verified surplus inventory channels.
- Inspection: All modules undergo visual inspection, functional power-on testing, and firmware version verification prior to shipment.
- Authenticity: Counterfeit screening is performed on all Honeywell modules. Certificates of conformance available upon request.
- Warranty: 90-day replacement warranty on all tested modules. Extended warranty available for volume orders.
- Packaging: ESD-safe anti-static packaging with foam insert protection for international shipping.
How to Order
- Confirm your part number: 8C-PAONA1 or 51454469-175
- Specify quantity and required delivery timeline
- Add to cart directly or contact us for bulk pricing and lead time confirmation
- For urgent requirements, email support@konmask.com with your PO or RFQ
- International orders: provide HS code confirmation and import documentation requirements
Lead Time: In-stock orders ship within 1–3 business days. Out-of-stock items: 7–21 business days depending on sourcing channel.
Replacement & Compatibility FAQ
Q: Can I replace 8C-PAONA1 with 8C-PAONA2?
A: Yes, the 8C-PAONA2 is a drop-in hardware replacement and adds HART communication capability. No backplane changes are required, but Control Builder configuration must be updated to enable HART.
Q: Is 51454469-175 the same as 8C-PAONA1?
A: Yes. 51454469-175 is Honeywell’s internal part number for the 8C-PAONA1 module. Both refer to the identical hardware.
Q: Can this module be used in a non-Honeywell DCS?
A: No. The 8C-PAONA1 uses a proprietary Honeywell FTE backplane interface and is not compatible with third-party DCS platforms such as ABB, Emerson, or Siemens without significant hardware adaptation.
Q: What is the maximum cable length for the 4–20 mA output?
A: Cable length is limited by total loop impedance. With a 750 Ω maximum load, standard 0.5 mm² shielded cable can typically run up to 500 meters depending on cable resistance per meter.
Q: Do you provide a test report with the module?
A: Yes. A functional test report is available upon request for all refurbished units. New OEM units include Honeywell’s factory test documentation.
Q: Can I return a module if it is not compatible?
A: Yes. We offer a 30-day return policy for unused, uninstalled modules in original packaging. Contact support@konmask.com to initiate a return.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


