Honeywell 900CP1-0300 – HC900 Hybrid Control Designer Processor Module | HC900 DCS Platform
Engineering Background
The Honeywell HC900 platform is a field-proven distributed control system (DCS) widely deployed in continuous process industries including refining, chemicals, power generation, and specialty manufacturing. Designed for hybrid and batch process control, the HC900 architecture separates I/O from the controller, enabling scalable, fault-tolerant automation topologies.
Product Positioning
The 900CP1-0300 is the central processing unit of the HC900 controller rack. It executes the control strategy, manages peer-to-peer communications, and coordinates all I/O module data acquisition. This module is the authoritative source of real-time control logic for the entire HC900 node, making it the most critical component in any HC900-based control system.
Complete Technical Specifications
| Part Number | 900CP1-0300 |
| Manufacturer | Honeywell Process Solutions |
| Product Series | HC900 Hybrid Control Designer |
| Module Type | Control Processor Module (CPU) |
| Processor Speed | 300 MHz (embedded RISC processor) |
| Control Execution Rate | Configurable: 100 ms / 500 ms / 1000 ms scan cycles |
| Program Memory | Non-volatile Flash; retains configuration on power loss |
| Communication Ports | 2× Ethernet (10/100 Mbps), 1× RS-485 (peer-to-peer), 1× USB (configuration) |
| Supported Protocols | Modbus TCP/IP, OPC DA, Honeywell FTE (Fault Tolerant Ethernet) |
| Max I/O Modules per Rack | Up to 16 I/O modules per local rack |
| Remote I/O Support | Yes – via HC900 Remote I/O expansion racks |
| Operating Temperature | 0 °C to +60 °C (32 °F to 140 °F) |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 5% to 95% non-condensing |
| Power Consumption | ≤ 8 W (from rack backplane, 5 VDC) |
| Weight | 320 g |
| Mounting | HC900 Controller Rack (backplane slot 0) |
| Certifications | CE, UL, cUL, FM Class I Div 2 |
| Country of Origin | USA |
Proven Application Environments
- Refinery & Petrochemical Plants – Continuous process control for distillation columns, heat exchangers, and reactor loops
- Specialty Chemical Manufacturing – Batch sequencing and recipe management with HC900 Hybrid Control Designer software
- Power Generation – Boiler combustion control, turbine auxiliary systems, and BOP automation
- Pharmaceutical & Biotech – FDA 21 CFR Part 11-compatible batch control with full audit trail support
- Food & Beverage Processing – CIP/SIP sequence control and temperature regulation
- Water & Wastewater Treatment – SCADA-integrated process control with Modbus TCP/IP connectivity
Engineering Advantages
- Deterministic Scan Execution – Configurable 100 ms scan cycle ensures real-time response for fast process loops
- Dual Ethernet Redundancy – Two independent Ethernet ports support redundant network topologies without additional hardware
- Non-Volatile Configuration Storage – Flash memory retains full control strategy through power cycles and brownouts
- Hot-Swap Compatible Rack Design – Minimizes process downtime during module replacement in live systems
- Peer-to-Peer RS-485 Bus – Enables direct controller-to-controller data exchange without SCADA intermediary
- Unified Engineering Environment – Fully integrated with Honeywell HC900 Designer software for function block programming
System Architecture & Signal Flow
The 900CP1-0300 occupies Slot 0 of the HC900 controller rack. On power-up, it loads the control strategy from onboard Flash, initializes the backplane bus, and begins scanning all installed I/O modules at the configured cycle rate. Process values are read from analog and digital I/O modules, processed through the function block control strategy, and output commands are written back to the I/O modules within the same scan cycle.
Ethernet Port 1 connects to the supervisory SCADA/DCS network (Modbus TCP or OPC DA). Ethernet Port 2 can be configured for a dedicated engineering workstation connection or redundant network path. The RS-485 port enables peer-to-peer data sharing between up to 32 HC900 controllers on a single segment, supporting distributed control architectures without a central server dependency.
Sourcing & Quality Verification
- ✅ OEM-Sourced Inventory – All 900CP1-0300 units are sourced from authorized Honeywell distribution channels or verified industrial surplus with full traceability
- ✅ Pre-Shipment Functional Test – Each module undergoes power-on verification and communication port testing before dispatch
- ✅ Authentic Label & Firmware Verification – Part number, revision level, and firmware version confirmed against Honeywell documentation
- ✅ ESD-Safe Packaging – Shipped in anti-static bags with foam cushioning inside double-wall corrugated cartons
- ✅ 90-Day Warranty – Covered against DOA and latent defects with direct RMA support from Konmask
Procurement Process
- Confirm Part Number – Verify 900CP1-0300 against your HC900 rack configuration and firmware revision requirements
- Request Quote – Contact support@konmask.com for volume pricing, lead time, and export documentation
- Place Order – Purchase directly via this listing or submit a PO for NET-30 terms (approved accounts)
- Shipping & Documentation – Commercial invoice, packing list, and COO certificate provided; DDP/DAP Incoterms available
- Incoming Inspection – Konmask provides test reports and label photos on request prior to shipment
Technical FAQ
Q: Is the 900CP1-0300 compatible with all HC900 rack sizes?
A: Yes. It is compatible with the 4-slot, 8-slot, and 16-slot HC900 controller racks. It always occupies Slot 0.
Q: Can this module be used in a redundant CPU configuration?
A: The 900CP1-0300 supports simplex (single CPU) operation. For redundant CPU configurations, refer to the 900CP2-0300 (redundant processor pair).
Q: What software is required to program this module?
A: Honeywell HC900 Designer software (v4.x or later recommended). Configuration is uploaded via USB or Ethernet.
Q: What is the firmware revision on available units?
A: Firmware revision is confirmed at time of order. Contact us to specify minimum firmware version requirements.
Q: Do you provide export documentation for international shipments?
A: Yes. We provide commercial invoice, packing list, ECCN classification, and COO certificate. HS Code: 8537.10.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






