HONEYWELL CC-PDIL01 (51405040-175) Digital Input 24V Module | Replacement, Equivalent & Selection Guide
The HONEYWELL CC-PDIL01 (Part No. 51405040-175) is a 24V DC Digital Input module designed for Honeywell’s C300 Controller platform within the Experion PKS distributed control system (DCS). It delivers reliable field-level digital signal acquisition for process automation environments demanding high availability and precision. Whether you are sourcing an original unit, evaluating a compatible replacement, or selecting the right DI module for a new project, this guide covers everything you need.
Technical Specifications
- Part Number: CC-PDIL01 / 51405040-175
- Manufacturer: Honeywell Process Solutions
- Module Type: Digital Input (DI)
- Input Voltage: 24V DC
- Channel Count: 32 channels (16 per I/O Link)
- Signal Type: Discrete / Digital (dry contact or 24V sourcing)
- Communication: C300 I/O Link (proprietary Honeywell bus)
- Isolation: Channel-to-channel and field-to-system isolation
- Mounting: DIN rail / C300 I/O chassis
- Operating Temperature: 0°C to 60°C
- Certifications: CE, UL, FM (refer to Honeywell datasheet for full listing)
- Weight: Approx. 400 g
Compatible Replacement & Equivalent Models
When the CC-PDIL01 is unavailable, discontinued, or end-of-life, the following models may serve as functional replacements or equivalents depending on your system configuration:
- CC-PDIL01 Rev. B / C — Direct hardware revision replacements; verify firmware compatibility before installation
- CC-PDIL01R — Redundant variant; drop-in for redundant I/O configurations with reconfiguration in Control Builder
- CC-PDOB01 — Digital Output counterpart; used in paired DI/DO architectures
- Honeywell 51304485-100 — Legacy DI module for older Experion R200/R300 systems; not a direct replacement
- Third-party DI modules with C300 I/O Link compatibility — Consult Honeywell-certified integrators before substitution; native support is not guaranteed
⚠ Always validate firmware version, I/O Link revision, and Experion release compatibility before substituting any module in a live system.
Why Choose the Original Model
- Native Experion PKS Integration: Plug-and-play with C300 Controller — no custom configuration required
- Proven Reliability: Engineered for continuous 24/7 industrial operation in process-critical environments
- Full Honeywell Support: Covered under Honeywell’s lifecycle management and firmware update programs
- Safety Compliance: Meets IEC 61511 functional safety requirements for SIL-rated loops when properly configured
- Reduced Engineering Risk: Eliminates integration uncertainty and commissioning delays associated with third-party substitutes
- Long-term Availability: Stocked by authorized distributors and verified surplus channels globally
Typical Applications
- Oil & gas upstream/downstream process monitoring and control
- Chemical and petrochemical plant DCS integration
- Power generation facility control systems
- Pharmaceutical manufacturing batch control
- Pulp & paper and water treatment automation
- Any Experion PKS installation requiring 24V DC digital field signal acquisition
System Compatibility
- DCS Platform: Honeywell Experion PKS (R400 and above recommended)
- Controller: C300 Process Controller
- I/O Chassis / IOTA: CC-TDIL01 (I/O Termination Assembly) — must be paired correctly
- Software: Honeywell Control Builder, Experion Configuration Studio
- Redundancy: Supports non-redundant and redundant I/O configurations (redundant variant: CC-PDIL01R)
- Not Compatible With: TDC 3000, PlantScape, or non-Honeywell DCS platforms
Selection Guide
Use the following criteria to confirm the CC-PDIL01 is the right module for your application:
- Signal voltage: Field signals must be 24V DC — for 120V AC inputs, consider CC-PDIL02 or equivalent AC DI modules
- Channel count: 32 DI channels per module — for higher density, evaluate multi-module configurations
- Redundancy requirement: Non-redundant → CC-PDIL01 | Redundant → CC-PDIL01R
- Experion release: Confirm module support in your installed Experion PKS release (check Honeywell compatibility matrix)
- IOTA pairing: Must be paired with CC-TDIL01 termination assembly — verify IOTA availability before ordering
- Replacement scenario: For like-for-like swap, match part number and hardware revision; for upgrade, consult Honeywell migration guide
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels with full traceability
- Pre-shipment functional inspection and visual QC performed on every unit
- Original manufacturer packaging preserved where available
- Traceability documentation (Certificate of Conformance, test records) available upon request
- Refurbished units clearly labeled and priced separately — contact us for availability
- Warranty: 90-day replacement warranty on all stocked units
How to Order
- Step 1: Confirm your Experion PKS release and C300 firmware version
- Step 2: Verify IOTA (CC-TDIL01) availability at your site
- Step 3: Add CC-PDIL01 (51405040-175) to cart, or contact us for bulk/project pricing
- Step 4: Provide PO number or project reference for expedited processing
- Lead Time: In-stock units ship within 1–3 business days; contact us for urgent or large-quantity requirements
📧 support@konmask.com | 📞 +0086 19859288691
Replacement & Compatibility FAQ
Q: Can CC-PDIL01 replace older Honeywell DI modules from TDC 3000?
A: No. CC-PDIL01 is designed exclusively for the C300/Experion PKS platform and is not backward-compatible with TDC 3000 or PlantScape systems.
Q: Is CC-PDIL01 interchangeable with CC-PDIL01R?
A: Physically similar, but CC-PDIL01R is the redundant variant. Substituting one for the other requires reconfiguration in Control Builder and may affect system redundancy status.
Q: What IOTA is required for CC-PDIL01?
A: The CC-TDIL01 termination assembly is the standard IOTA pairing. Confirm your cabinet wiring before ordering.
Q: Can I use a third-party 24V DI module as a replacement?
A: Third-party modules are generally not supported on the C300 I/O Link bus without Honeywell certification. Consult your system integrator before substitution.
Q: Do you offer tested or refurbished units?
A: Yes. All units undergo pre-shipment QC. Refurbished units are clearly labeled and priced accordingly. Contact us for availability and lead time.
Q: What is the difference between CC-PDIL01 and CC-PDIL02?
A: CC-PDIL01 accepts 24V DC field signals; CC-PDIL02 is designed for 120V AC inputs. Selecting the wrong module will result in incorrect signal acquisition and potential hardware damage.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






