Process Control I/O Solution – Honeywell CC-PUIO31 | C300 Series DCS
Where This Product Is Used
The Honeywell CC-PUIO31 Universal I/O Module is purpose-built for demanding process industries where flexible, high-density signal termination is critical. Engineers specify this module across the following environments:
- Oil & Gas Refineries – Integrates with Experion PKS to monitor pressure transmitters, thermocouples, and control valves across distillation and separation units.
- Chemical & Petrochemical Plants – Handles mixed analog/digital I/O from reactor instrumentation, enabling real-time process variable monitoring and interlock logic.
- Power Generation Facilities – Deployed in turbine control and boiler management systems where signal integrity and redundancy are non-negotiable.
- Pulp & Paper Mills – Manages multi-loop control for drying, pressing, and coating processes with deterministic scan times.
- Water & Wastewater Treatment – Supports SCADA-integrated control of pumping stations, dosing systems, and filtration loops.
- Pharmaceutical Manufacturing – Meets the signal isolation and audit-trail requirements of GMP-regulated batch processes.
Technical Specifications
- Part Number: CC-PUIO31
- Series: Honeywell C300 / Experion PKS
- Module Type: Universal I/O (configurable AI / AO / DI / DO per channel)
- I/O Channels: 32 universal channels (software-configurable)
- Signal Types Supported: 4–20 mA, 0–10 V, RTD, Thermocouple, Discrete 24 VDC
- Communication Bus: FTE (Fault Tolerant Ethernet) via C300 Controller
- Power Supply: 24 VDC (supplied via backplane)
- Operating Temperature: 0°C to 60°C
- Humidity: 5% to 95% RH, non-condensing
- Mounting: Series C I/O Link backplane (horizontal or vertical)
- Weight: 320 g (approx.)
- Certifications: CE, UL, FM, ATEX (zone 2 with appropriate barriers)
Why Engineers Specify This Model
- Universal Channel Flexibility – Each of the 32 channels is independently configurable via Experion Configuration Studio, eliminating the need for separate AI, AO, DI, and DO modules and reducing cabinet footprint by up to 40%.
- Hot-Swap Capability – Modules can be replaced under power without process interruption, critical for continuous-operation facilities with zero-downtime mandates.
- Integrated HART Pass-Through – Supports HART 5/6/7 on analog channels, enabling asset management and remote diagnostics without additional multiplexers.
- Redundancy Ready – Pairs with CC-PUIO31R for 1:1 redundant I/O configurations, meeting SIL 2 loop requirements when combined with appropriate safety instrumented system architecture.
- Tight Experion PKS Integration – Native support for Continuous Control Builder (CCB) function blocks, reducing engineering hours during commissioning.
Complete System Bill of Materials
For a fully operational C300 DCS node using the CC-PUIO31, engineers typically specify the following components:
- CC-PUIO31 – Universal I/O Module (this item)
- CC-PUIO31R – Redundant Universal I/O Module (optional)
- CC-PCN0x1 – C300 Controller Module
- CC-TCNT01 – I/O Link Termination Assembly
- CC-PWRR01 – Redundant Power Supply Module
- CC-CBMK01 – Mounting Kit / Backplane Assembly
- 51309288-175 – FTE Network Interface Card (for controller)
Compliance & Industry Standards
- IEC 61131-2 – Programmable Controllers: Equipment Requirements and Tests
- IEC 61508 / IEC 61511 – Functional Safety (SIL-capable configurations)
- NAMUR NE 43 – Signal levels for process control transmitters
- IEEE 802.3 – Ethernet standard (FTE backbone)
- CE Marking – EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
- UL 508 – Industrial Control Equipment
- FM Class I, Division 2 – Hazardous Locations (with appropriate installation)
Quality Assurance & Sourcing
Every CC-PUIO31 unit sourced through Konmask.com undergoes a structured verification process before dispatch:
- Visual Inspection – Connector pins, housing integrity, label legibility, and firmware revision label checked against Honeywell factory standards.
- Functional Bench Test – Where applicable, modules are powered and channel configuration is verified using Experion PKS test environment.
- Traceability Documentation – Original factory documentation, serial number records, and test reports provided upon request.
- Packaging – Anti-static ESD packaging with desiccant; double-boxed for international freight.
Konmask.com specializes in genuine and refurbished industrial automation components. All refurbished units are clearly labeled and priced accordingly. New-in-box (NIB) units are available with original Honeywell packaging.
How to Source This Part
- Add to Cart – Select quantity and proceed to checkout directly on this page.
- Request a Quote – For orders of 3+ units or project-based procurement, email support@konmask.com for volume pricing and lead time confirmation.
- Urgent Requirements – Call or WhatsApp +0086 19859288691 for same-day response on critical plant shutdowns or emergency replacements.
- Export & Cross-Border Orders – We ship globally. DDP (Delivered Duty Paid) terms available for select regions. Contact us for customs documentation support.
Application-Specific FAQ
Q: Is the CC-PUIO31 compatible with Experion PKS R500 and later?
A: Yes. The CC-PUIO31 is supported from Experion PKS R400 onward. For R500+ deployments, ensure firmware is updated to the revision specified in Honeywell TPN 51-52-25-109.
Q: Can this module be used in a Safety Instrumented System (SIS)?
A: The CC-PUIO31 is a standard process control I/O module and is not rated as a safety module on its own. For SIL-rated loops, pair with Honeywell’s Safety Manager SC or FSC series and consult your functional safety engineer.
Q: What is the difference between CC-PUIO31 and CC-PUIO31R?
A: The CC-PUIO31R is the redundant variant. In a redundant pair, one module acts as primary and the other as standby, with automatic bumpless transfer on fault detection. The CC-PUIO31 (non-R) operates as a simplex module.
Q: Do you provide the termination assembly (ICTB)?
A: Yes. We stock compatible termination assemblies. Please specify your cable type (screw terminal vs. pre-wired) when ordering to ensure the correct accessory is included.
Q: What lead time should I expect?
A: In-stock units ship within 1–3 business days. For out-of-stock items, typical lead time is 2–6 weeks depending on global availability. Contact us for real-time stock status.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691






