Honeywell CC-TAOX01 Analog Output Module | Replacement, Equivalent & Selection Guide
The Honeywell CC-TAOX01 is a high-precision Analog Output (AO) module designed for the Honeywell C300 Controller / Experion PKS distributed control system (DCS). It delivers reliable 4–20 mA current loop outputs for process control applications across oil & gas, chemical, power generation, and industrial automation sectors. This page serves as a comprehensive selection, replacement, and compatibility reference for engineers and procurement teams sourcing the CC-TAOX01 or its functional equivalents.
Technical Specifications
- Part Number: CC-TAOX01
- Manufacturer: Honeywell Process Solutions
- Series: Experion PKS / C300 DCS I/O
- Module Type: Analog Output (AO)
- Output Channels: 8 channels (isolated)
- Output Signal: 4–20 mA current loop
- Resolution: 16-bit DAC
- Accuracy: ±0.1% of full scale
- Loop Compliance Voltage: Up to 24 VDC
- Communication: FTE (Fault Tolerant Ethernet) via C300 backplane
- Isolation: Channel-to-channel and channel-to-bus isolation
- Operating Temperature: 0°C to 60°C
- Power Consumption: Supplied via C300 I/O chassis backplane
- Mounting: C300 I/O chassis (IOTA required)
- Certifications: CE, UL, FM (Class I, Div 2)
- Firmware: Compatible with Experion PKS R400 and above
Compatible Replacement & Equivalent Models
When the CC-TAOX01 is unavailable or under evaluation, the following models may serve as functional replacements or equivalents depending on system configuration:
- CC-TAOX11 — Enhanced version with HART communication support; direct upgrade path
- CC-TAIM01 — Analog Input module (for cross-reference in mixed I/O chassis planning)
- 51304485-150 — Legacy Honeywell AO module used in TDC 3000 / PlantScape systems (not pin-compatible; requires IOTA change)
- Yokogawa AAI543-S00 — Functional analog output equivalent for cross-vendor migration studies (requires engineering re-mapping)
- ABB AI830A / AO810V2 — Comparable AO modules in ABB 800xA DCS; not plug-compatible but functionally equivalent in 4–20 mA output
Note: Always verify IOTA compatibility, firmware version, and channel count before substituting modules in a live DCS environment.
Why Choose the Original CC-TAOX01
- Native C300 Integration: Plug-and-play with Experion PKS — no re-engineering of control strategies required.
- Proven Reliability: Widely deployed in critical process industries with documented MTBF exceeding 200,000 hours.
- Redundancy Support: Supports 1:1 module redundancy when paired with redundant C300 controllers.
- Diagnostics: Built-in online diagnostics accessible via Experion Station without process interruption.
- Regulatory Compliance: FM-approved for hazardous area installations (Class I, Division 2).
Typical Applications
- Oil & gas upstream/downstream process control (valve positioner outputs, flow control)
- Chemical plant reactor temperature and pressure setpoint transmission
- Power generation boiler and turbine control loops
- Pharmaceutical batch process automation
- Water treatment and municipal utility SCADA integration
- Pulp & paper mill process control
System Compatibility
- Controller: Honeywell C300 Process Controller
- Platform: Experion PKS (R400, R410, R430, R500 and above)
- I/O Chassis: CC-PCF901 / CC-PCF902 (standard and extended chassis)
- IOTA Required: CC-TAOX01 IOTA (field termination assembly)
- Network: FTE (Fault Tolerant Ethernet) — 100 Mbps dual-ring
- Not Compatible With: Honeywell TDC 3000, PlantScape, or Safety Manager platforms without hardware and software re-engineering
Selection Guide
Use the following criteria to confirm the CC-TAOX01 is the correct module for your application:
- Step 1 — Confirm Platform: Verify your DCS is Experion PKS with C300 controllers. The CC-TAOX01 is not compatible with legacy Honeywell platforms.
- Step 2 — Count Output Channels: CC-TAOX01 provides 8 AO channels. If you need 16 channels, consider two modules or the CC-TAOX11 (HART-enabled).
- Step 3 — HART Requirement: If field devices require HART communication for diagnostics or remote configuration, select CC-TAOX11 instead.
- Step 4 — Hazardous Area: For Zone 1 / Class I Div 1 installations, a Zener barrier or galvanic isolator is required in addition to this module.
- Step 5 — Redundancy: For critical loops, plan for 1:1 module redundancy and confirm chassis slot availability.
- Step 6 — Firmware: Confirm Experion PKS firmware version is R400 or above before ordering.
Quality Assurance & Sourcing
At Konmask.com, all Honeywell CC-TAOX01 modules are sourced through verified industrial supply channels. Each unit undergoes:
- Visual and physical inspection upon receipt
- Firmware version verification
- Functional power-on test where applicable
- Anti-static packaging and secure export-grade shipping
We supply both new-in-box (NIB) and tested surplus units. All surplus units are clearly labeled with condition grade. Certificates of conformance available upon request.
How to Order
- Part Number: CC-TAOX01
- Minimum Order: 1 unit
- Lead Time: In-stock units ship within 2–5 business days; sourced units 7–21 days
- Payment: T/T (Wire Transfer), PayPal, Trade Assurance
- Shipping: DHL / FedEx / UPS worldwide; sea freight available for bulk orders
- RFQ: Email support@konmask.com with quantity and required delivery date
- Phone/WhatsApp: +0086 19859288691
Replacement & Compatibility FAQ
Q: Can CC-TAOX01 replace CC-TAOX11?
A: Functionally yes for standard 4–20 mA outputs, but CC-TAOX11 adds HART support. If your field devices use HART, do not downgrade to CC-TAOX01.
Q: Is CC-TAOX01 compatible with Experion R500?
A: Yes. The module is backward and forward compatible across Experion PKS R400 through R500 series.
Q: Can I use a third-party AO module as a drop-in replacement?
A: No. The C300 I/O bus uses a proprietary backplane protocol. Only Honeywell-certified C300 I/O modules are plug-compatible.
Q: What IOTA is required for CC-TAOX01?
A: The CC-TAOX01 requires its dedicated IOTA (field termination assembly). Using an incorrect IOTA will result in wiring errors and potential process upsets.
Q: Do you provide a warranty?
A: Yes. New-in-box units carry the original Honeywell warranty. Tested surplus units carry a 90-day Konmask functional warranty.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691


