Honeywell CC-TNWD01 Network Module IOTA DIN Rail | Replacement, Equivalent & Selection Guide
The Honeywell CC-TNWD01 is a Network Module IOTA (Input/Output Termination Assembly) designed for DIN Rail mounting, used within Honeywell’s Experion PKS C300 Controller series. It provides the physical network interface termination point for field I/O modules in distributed control system (DCS) architectures. Konmask.com supplies genuine and compatible CC-TNWD01 units with full traceability for industrial automation projects worldwide.
Technical Specifications
- Part Number: CC-TNWD01
- Manufacturer: Honeywell Process Solutions
- Series: Experion PKS / C300 DCS
- Module Type: Network Module IOTA (Termination Assembly)
- Mounting: DIN Rail
- Weight: 380 g
- Communication: FTE (Fault Tolerant Ethernet) / Control Network
- Operating Environment: Industrial DCS cabinet
- Compliance: CE, UL (per Honeywell Experion PKS certification)
Compatible Replacement & Equivalent Models
When the CC-TNWD01 is unavailable or end-of-life, the following models may serve as functional equivalents or replacements depending on your system revision. Always verify firmware and backplane compatibility before substitution.
- CC-TNWD01R – Revised/repaired variant (same form factor)
- CC-TCNT01 – C300 Controller Network Termination (alternative termination topology)
- CC-PCNT01 – Process Controller Network Termination (compatible in select C300 configurations)
- 51304485-100 – Legacy Honeywell network termination module (older Experion revisions)
- Third-party DIN Rail FTE termination modules – Consult Konmask engineering team for validated alternatives
Note: Replacement compatibility depends on Experion PKS revision level and C300 firmware version. Contact support@konmask.com for a validated cross-reference.
Why Choose the Original CC-TNWD01
- Factory-certified for Honeywell Experion PKS C300 architecture
- Guaranteed signal integrity on FTE (Fault Tolerant Ethernet) network segments
- Plug-and-play DIN Rail installation — no field wiring modification required
- Full Honeywell lifecycle support and firmware compatibility assurance
- Traceable serial number and manufacturing date for compliance audits
Typical Applications
- Oil & gas refinery DCS control loops
- Chemical plant process automation
- Power generation distributed control systems
- Pharmaceutical batch control (FDA 21 CFR Part 11 environments)
- Pulp & paper and water treatment plant automation
System Compatibility
- Platform: Honeywell Experion PKS R400 / R410 / R430 / R500+
- Controller: C300 Process Controller
- Network: FTE (Fault Tolerant Ethernet) backbone
- I/O Series: Series C I/O modules (CC-PAIX01, CC-PDOB01, etc.)
- Cabinet: Standard 19″ rack or DIN Rail enclosure
Selection Guide
Use the table below to identify the correct network termination module for your Experion PKS system:
- C300 + FTE network + DIN Rail cabinet → CC-TNWD01 ✓ (this model)
- C300 + FTE network + 19″ rack → CC-TCNT01
- C200 / C200E controller → 51304485-100 or CC-PCNT01
- Experion R500+ with redundant FTE → Verify with Honeywell TAC or Konmask team
Not sure which module fits your system? Send your Experion revision and C300 model number to support@konmask.com and our engineers will confirm compatibility within 24 hours.
Quality Assurance & Sourcing
- All CC-TNWD01 units sourced from authorized Honeywell distributors or verified surplus channels
- 100% functional test prior to shipment
- Anti-static packaging with humidity indicator card
- Certificate of conformance (CoC) available on request
- Warranty: 12 months from date of shipment
How to Order
- Add CC-TNWD01 to cart and proceed to checkout, or
- Email support@konmask.com with your PO and required quantity
- For bulk orders (>5 units) or urgent requirements, call +0086 19859288691
- Lead time: In-stock units ship within 2 business days; sourced units 7–15 business days
Replacement & Compatibility FAQ
Q: Can CC-TNWD01 replace CC-TCNT01?
A: They serve similar functions but differ in mounting form factor (DIN Rail vs. rack). Physical substitution requires cabinet modification. Confirm with your system integrator.
Q: Is CC-TNWD01 compatible with Experion R500?
A: Yes, in most configurations. Verify the FTE network topology and C300 firmware revision with Honeywell TAC before installation.
Q: Do you supply refurbished units?
A: Yes. All refurbished units are fully tested and include a 12-month warranty. New and refurbished stock is clearly labeled at checkout.
Q: Can I get a datasheet or wiring diagram?
A: Yes — email support@konmask.com with your request and we will provide the relevant Honeywell documentation.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
