Honeywell TC-CEN011 Ethernet Communication Module | Replacement, Equivalent & Selection Guide
The Honeywell TC-CEN011 is a dedicated Ethernet Communication Module designed for the Experion PKS C300 Controller platform. It provides high-speed, deterministic Ethernet connectivity between the C300 controller and the FTE (Fault Tolerant Ethernet) network backbone, enabling real-time process data exchange in mission-critical DCS environments. Procurement engineers sourcing this module will find complete specifications, verified replacement options, and ordering guidance below.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | TC-CEN011 |
| Manufacturer | Honeywell Process Solutions |
| Platform | Experion PKS — C300 Controller Series |
| Module Type | Ethernet Communication Module (CENet) |
| Network Interface | Fault Tolerant Ethernet (FTE) — Dual-port redundant |
| Communication Protocol | Ethernet/IP, TCP/IP |
| Data Rate | 100 Mbps (Fast Ethernet) |
| Connector Type | RJ-45 (×2, redundant) |
| Backplane Interface | C300 Controller Chassis Slot |
| Power Supply | Supplied via chassis backplane |
| Operating Temperature | 0 °C to +60 °C |
| Storage Temperature | −40 °C to +85 °C |
| Humidity | 5% to 95% RH, non-condensing |
| Weight | 2,160 g (module + packaging) |
| Certifications | CE, UL, FM (Class I Div 2) |
| Country of Origin | USA |
Compatible Replacement & Equivalent Models
When the TC-CEN011 is unavailable or end-of-life, the following models may serve as functional replacements depending on firmware revision and chassis configuration. Always verify compatibility with your Experion PKS system version before substitution.
| Model | Manufacturer | Compatibility Notes | Recommendation |
|---|---|---|---|
| TC-CEN011 | Honeywell | Original OEM module — direct fit | ✅ First Choice |
| TC-CEN021 | Honeywell | Enhanced version; check firmware compatibility | ✅ Recommended Upgrade |
| CC-TCF901 | Honeywell | C300 FTE module variant; verify chassis slot | ⚠️ Verify Before Order |
| TC-CCR014 | Honeywell | Controller module with integrated comms; different form factor | ⚠️ Engineering Review Required |
Note: Third-party equivalents are not recommended for safety-rated loops. Contact Konmask engineering support for a compatibility assessment.
Why Choose the Original TC-CEN011
- Guaranteed OEM Compatibility: Plug-and-play fit within the Experion PKS C300 chassis — no firmware patching required.
- Fault Tolerant Ethernet (FTE) Support: Dual-port redundant design eliminates single points of network failure.
- Deterministic Latency: Engineered for real-time process control loops where communication jitter is unacceptable.
- Long-Term Support: Honeywell provides extended lifecycle support and firmware updates for the C300 platform.
- Safety Loop Integrity: Maintains SIL-rated system integrity when used in certified configurations.
Typical Applications
- Oil & Gas — upstream/downstream DCS network expansion
- Petrochemical & Refining — C300 controller FTE backbone integration
- Power Generation — turbine and boiler control system networking
- Pulp & Paper — process automation network redundancy
- Pharmaceutical — GMP-compliant batch process control
- Water & Wastewater — SCADA/DCS hybrid network architectures
System Compatibility
- Controller: Honeywell C300 Process Controller (all revisions)
- Network: Experion PKS Fault Tolerant Ethernet (FTE) — primary and secondary rings
- Software: Experion PKS R400 and above (verify with Honeywell release notes for earlier versions)
- Chassis: C300 Series I/O Link chassis — standard and extended configurations
- Redundancy: Supports controller redundancy configurations when paired with redundant C300 modules
Selection Guide
Use the following criteria to confirm the TC-CEN011 is the correct module for your application:
- ✅ Your DCS platform is Honeywell Experion PKS with C300 controllers
- ✅ You require FTE (Fault Tolerant Ethernet) network connectivity
- ✅ Your chassis has an available CENet slot for the communication module
- ✅ Your Experion PKS software version is R400 or later
- ✅ You need dual-port redundant Ethernet at the controller level
If any of the above conditions differ, contact our engineering team at [email protected] for a tailored selection recommendation.
Quality Assurance & Sourcing
- Source: Authorized distributor channels and verified surplus OEM stock
- Inspection: Every unit undergoes visual inspection, label verification, and functional pre-check before shipment
- Traceability: Full lot traceability documentation available on request
- Warranty: 12-month warranty against manufacturing defects
- Counterfeit Prevention: All modules verified against Honeywell OEM markings and serial number databases
- Packaging: ESD-safe anti-static packaging with moisture barrier for international shipping
How to Order
- Confirm your part number: TC-CEN011
- Verify chassis slot availability and Experion PKS software version
- Submit your RFQ via email to [email protected] or via the product page inquiry form
- Receive quotation within 24 business hours including lead time and stock status
- Confirm purchase order — payment via T/T, L/C, or agreed terms
- Shipment with full documentation: packing list, commercial invoice, COO, and inspection report
Replacement & Compatibility FAQ
Q: Can TC-CEN021 directly replace TC-CEN011?
A: In most C300 configurations, yes — but firmware compatibility must be verified against your Experion PKS release. Contact us for a compatibility check.
Q: Is TC-CEN011 compatible with Experion PKS R310?
A: Compatibility with versions prior to R400 requires verification. Honeywell release notes should be consulted, and we recommend contacting our technical team.
Q: Do you supply refurbished TC-CEN011 modules?
A: We supply both new OEM and certified refurbished units. All refurbished modules are tested to OEM specifications and carry a 12-month warranty.
Q: What is the lead time for TC-CEN011?
A: In-stock units ship within 3–5 business days internationally. Lead time for sourced units is typically 2–4 weeks depending on availability.
Q: Can I use a third-party Ethernet module as a replacement?
A: Third-party modules are not recommended for safety-rated or SIL-certified loops. For non-critical applications, contact our engineering team for assessment.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691









