LENZE E84AVSCE7514SXO Inverter Drive | Replacement, Equivalent & Selection Guide
The LENZE E84AVSCE7514SXO is a high-performance AC variable frequency inverter drive from LENZE’s E84AVSC series, designed for demanding industrial motion control applications. This page provides full technical specifications, compatible replacement models, equivalent alternatives, and a structured selection guide to help engineers and procurement teams make confident sourcing decisions.
Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | LENZE |
| Part Number / SKU | E84AVSCE7514SXO |
| Series | E84AVSC (Inverter Drives 8400) |
| Drive Type | AC Variable Frequency Drive (VFD / Inverter) |
| Rated Power | 7.5 kW (10 HP) |
| Input Voltage | 3-phase 380–480 V AC, ±10% |
| Output Voltage | 0–480 V AC (3-phase) |
| Output Frequency | 0–650 Hz |
| Control Method | V/f, Sensorless Vector Control |
| Protection Class | IP20 |
| Communication | CANopen / PROFIBUS (suffix-dependent) |
| Ambient Temperature | 0°C to +40°C (operating) |
| Standards | CE, UL, cUL |
Note: Always verify specifications against the official LENZE datasheet for your specific revision. Contact us if you need the full datasheet.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as direct or near-equivalent replacements for the LENZE E84AVSCE7514SXO. Compatibility depends on your application’s voltage, power, and communication requirements.
| Brand | Model | Power | Voltage | Notes |
|---|---|---|---|---|
| LENZE | E84AVSCE7514VXO | 7.5 kW | 380–480 V | Same series, different fieldbus suffix — verify communication module |
| LENZE | E84AVSCE5514SXO | 5.5 kW | 380–480 V | Lower power — suitable for de-rated applications |
| Siemens | 6SL3210-1KE21-3UF1 (SINAMICS G120) | 7.5 kW | 380–480 V | Cross-brand equivalent; requires parameter re-mapping |
| ABB | ACS580-01-018A-4 | 7.5 kW | 380–480 V | Drop-in power equivalent; different I/O wiring |
| Schneider | ATV320U75N4C | 7.5 kW | 380–480 V | Compact alternative; verify mounting dimensions |
| Danfoss | FC-302P7K5T4E20H1 | 7.5 kW | 380–480 V | High-performance alternative with advanced vector control |
Important: Cross-brand replacements require re-commissioning and parameter configuration. Konmask recommends using original LENZE units wherever possible for seamless integration.
Why Choose the Original Model
- Plug-and-play compatibility with existing LENZE 8400 series infrastructure and E-CAM/motion bus networks
- Native LENZE Engineer software support for rapid commissioning and diagnostics
- Proven reliability in continuous-duty industrial environments (conveyors, pumps, compressors, hoists)
- Consistent firmware ecosystem — no cross-brand parameter translation required
- Full OEM warranty and traceability when sourced through authorized channels
Typical Applications
- Conveyor and material handling systems
- Pump and fan speed control
- Compressor drives in HVAC and process industries
- Hoist and crane motion control
- Packaging and filling machinery
- Textile and printing machine drives
- General-purpose industrial automation lines
System Compatibility
- PLC Integration: Compatible with Siemens S7, Allen-Bradley ControlLogix/CompactLogix, Mitsubishi MELSEC, and LENZE PLC series via fieldbus
- Fieldbus Protocols: CANopen, PROFIBUS DP, EtherCAT (module-dependent — confirm suffix)
- HMI: Compatible with standard PROFIBUS/CANopen HMI panels
- Motor Types: Standard asynchronous induction motors; verify motor nameplate data before commissioning
- Braking: Internal braking transistor; external braking resistor required for regenerative loads
Selection Guide
Use the following criteria to confirm the E84AVSCE7514SXO is the right choice — or to identify the best alternative:
- Power Rating: Confirm motor shaft power ≤ 7.5 kW. For higher loads, consider E84AVSCE1104SXO (11 kW).
- Supply Voltage: Verify 3-phase 380–480 V AC supply availability at the installation point.
- Communication Protocol: Match the fieldbus suffix (S = CANopen, V = PROFIBUS, etc.) to your network topology.
- Enclosure & Mounting: IP20 is panel-mount only — ensure cabinet installation with adequate ventilation.
- Duty Cycle: For high-inertia or frequent start/stop cycles, confirm thermal derating requirements.
- Regulatory Compliance: CE-marked for EU; confirm UL listing requirements for North American installations.
Not sure which model fits your system? Contact our technical team at support@konmask.com with your motor nameplate data and control architecture.
Quality Assurance & Sourcing
- Genuine OEM units sourced from authorized LENZE distribution channels
- All units undergo incoming inspection: visual check, label verification, and functional test where applicable
- Traceability documentation available upon request (batch records, COC)
- Secure anti-static packaging with humidity indicators for long-distance shipping
- Stock available for immediate dispatch; lead time for non-stock items typically 3–10 business days
How to Order
- Confirm part number: E84AVSCE7514SXO
- Specify quantity and required delivery timeline
- Submit your inquiry via the product page or email support@konmask.com
- Receive quotation within 1 business day (HKT)
- Payment via T/T, PayPal, or as agreed — shipment via DHL / FedEx / sea freight
For bulk orders (>5 units) or OEM/project procurement, please request a project price.
Replacement & Compatibility FAQ
Q: Can I replace E84AVSCE7514SXO with a Siemens SINAMICS G120 directly?
A: Electrically yes (same power/voltage class), but you will need to re-wire I/O, re-map parameters, and re-commission the drive. Not a plug-and-play swap.
Q: What does the suffix “SXO” mean in the LENZE part number?
A: The suffix encodes the communication option and hardware variant. “S” typically denotes CANopen; “X” and “O” indicate specific hardware/software build options. Always match the full part number when ordering a replacement.
Q: Is the E84AVSCE7514SXO still in production?
A: LENZE has transitioned some 8400 series variants to the i550/i650 platform. Contact us to confirm current production status and available stock.
Q: Do you provide a warranty on this unit?
A: Yes — genuine units carry the standard LENZE warranty. Refurbished or tested units carry a Konmask 90-day functional warranty. Details provided at time of quotation.
Q: Can you supply the LENZE Engineer commissioning software?
A: LENZE Engineer is available as a free download from LENZE’s official portal. We can assist with configuration guidance upon request.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
