LENZE E84DGFCRENPX069 Inverter Drive | Replacement, Equivalent & Selection Guide
The LENZE E84DGFCRENPX069 is a high-performance AC inverter drive from LENZE’s E84DG series, engineered for precise motor speed control in demanding industrial automation environments. This page provides full technical specifications, compatible replacement models, selection guidance, and sourcing information to help engineers and procurement teams make confident decisions.
Technical Specifications
- Manufacturer: LENZE
- Part Number / SKU: E84DGFCRENPX069
- Series: E84DG (Inverter Drives 8400)
- Type: AC Variable Frequency Drive (VFD / Inverter)
- Control Mode: V/f control, Sensorless vector control
- Input Voltage: 3-phase, 380–480 V AC (±10%)
- Output Frequency: 0–650 Hz
- Protection Class: IP20 (panel-mount)
- Communication Interface: CANopen / EtherCAT (suffix-dependent)
- Weight: 1,230 g (approx.)
- Certifications: CE, UL
- Cooling: Forced air cooling
- Operating Temperature: 0 °C to +40 °C
- Storage Temperature: -25 °C to +70 °C
Note: Always verify specifications against the official LENZE E84DG datasheet for your specific application requirements.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as functional replacements or equivalents for the E84DGFCRENPX069. Compatibility depends on power rating, control interface, and application requirements — always verify before substitution.
| Brand | Model | Notes |
|---|---|---|
| LENZE | E84DGFCRENP069 (prior revision) | Same series, check firmware version |
| LENZE | E84AVSCE series | Newer generation, pin-compatible in many configs |
| SEW-EURODRIVE | MOVITRAC® B series | Cross-brand equivalent, verify bus protocol |
| Siemens | SINAMICS G120C | Widely available alternative, different parameterization |
| ABB | ACS355 / ACS580 | Comparable power class, different wiring layout |
| Danfoss | FC 51 / FC 302 | Functional equivalent for standard V/f applications |
Contact [email protected] for cross-reference assistance and availability confirmation.
Why Choose the Original Model
- Drop-in compatibility: Designed as a direct replacement within LENZE E84DG system architectures — no re-parameterization required in most cases.
- Proven reliability: LENZE’s E84DG series has a long track record in packaging, conveyor, and material handling applications.
- Integrated safety functions: Supports STO (Safe Torque Off) per IEC 61800-5-2 for machine safety compliance.
- Fieldbus flexibility: Native CANopen and optional EtherCAT support for seamless integration into existing LENZE or third-party control networks.
- Compact footprint: Optimized for panel-mount installations with minimal cabinet space requirements.
Typical Applications
- Conveyor and material handling systems
- Packaging and filling machines
- Pump and fan speed control
- Textile and printing machinery
- Automated assembly lines
- Crane and hoist control
System Compatibility
- PLC Integration: Compatible with LENZE L-force Controller, Siemens S7, Beckhoff TwinCAT, and other standard PLCs via CANopen/EtherCAT.
- Motor Types: Asynchronous (induction) motors; compatible with LENZE MF/MH motor series.
- Braking: Internal braking transistor; external braking resistor required for regenerative loads.
- EMC Filters: External EMC filter recommended for CE compliance in residential/light industrial environments.
Selection Guide
Use the following criteria to confirm the E84DGFCRENPX069 is the right choice — or to identify the best alternative:
- Power Rating: Match motor kW/HP rating to drive output capacity.
- Input Voltage: Confirm 3-phase 380–480 V AC supply availability.
- Control Mode: V/f for simple speed control; sensorless vector for higher torque accuracy.
- Communication Bus: Verify fieldbus protocol (CANopen vs. EtherCAT vs. Profibus) matches your PLC/HMI.
- Safety Requirements: Confirm STO or other safety function requirements per machine directive.
- Environment: IP20 is panel-mount only; select IP55/IP66 variants for harsh environments.
- Revision/Firmware: Check hardware revision compatibility when replacing an existing unit.
Not sure which model fits your system? Email [email protected] with your motor nameplate data and existing drive part number.
Quality Assurance & Sourcing
- Source: Konmask.com sources industrial automation components from authorized distributors and verified surplus channels.
- Inspection: All units undergo visual inspection and functional verification before dispatch.
- Warranty: 90-day replacement warranty on all stocked units.
- Traceability: Batch and serial number documentation available on request for quality-critical applications.
- Packaging: Anti-static packaging with original or equivalent protective materials.
How to Order
- Add the LENZE E84DGFCRENPX069 to your cart and proceed to checkout.
- For bulk orders (5+ units), B2B pricing, or lead time inquiries — contact us directly.
- Provide your shipping address and preferred freight method at checkout.
- Orders are typically dispatched within 1–3 business days from our warehouse.
Contact: [email protected] | +0086 19859288691
Website: https://konmask.com
Replacement & Compatibility FAQ
Q: Is the E84DGFCRENPX069 still in production?
A: LENZE periodically updates its drive series. Contact us to confirm current production status and available stock.
Q: Can I replace my E84DGFCRENPX069 with a newer LENZE E84AVSCE model?
A: In many cases yes, but parameter migration and wiring verification are required. Consult the LENZE migration guide or contact our technical team.
Q: Does this drive support Profibus DP?
A: The base E84DGFCRENPX069 supports CANopen. Profibus DP requires a specific communication module — verify the suffix code of your unit.
Q: What motor power rating does this drive support?
A: Please confirm with the full LENZE E84DG datasheet or contact us with your motor nameplate data for a precise match.
Q: Do you offer technical support for installation?
A: Yes. Our engineering team can assist with parameter setup, wiring diagrams, and integration guidance. Contact [email protected].
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: [email protected] | +0086 19859288691
