REXROTH TDM3.2-030-300-W1 AC Servo Controller | Replacement, Equivalent & Selection Guide
The Bosch Rexroth TDM3.2-030-300-W1 is a high-performance AC servo controller from the DIAX03 drive series, designed for precision motion control in demanding industrial automation environments. This page provides full technical specifications, compatible replacement models, application guidance, and sourcing information to help engineers and procurement teams make confident selection decisions.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | TDM3.2-030-300-W1 |
| Brand | Bosch Rexroth |
| Series | DIAX03 / TDM |
| Type | AC Servo Controller (Drive) |
| Continuous Output Current | 30 A |
| Peak Output Current | 60 A (estimated, 2× continuous) |
| DC Bus Voltage | 300 V DC |
| Cooling Method | W1 – Water Cooling |
| Control Interface | SERCOS / Analog / Digital I/O |
| Feedback Compatibility | Resolver, Encoder (DSF/MSF) |
| Weight | 8.8 kg |
| Mounting | Panel / Cabinet Mount |
| Protection Class | IP20 |
| Communication | SERCOS fiber optic ring |
Note: Specifications are reference values. Always verify against the original Rexroth documentation for your specific firmware version.
Compatible Replacement & Equivalent Models
The following models are commonly evaluated as direct or functional replacements for the TDM3.2-030-300-W1. Compatibility depends on your system firmware, motor pairing, and bus topology.
| Model | Brand | Current Rating | Bus Voltage | Cooling | Compatibility Notes |
|---|---|---|---|---|---|
| TDM3.2-030-300-W0 | Rexroth | 30 A | 300 V | Air (W0) | Direct electrical equivalent; different cooling method |
| TDM3.2-020-300-W1 | Rexroth | 20 A | 300 V | Water | Lower current; verify motor load requirements |
| TDM3.2-050-300-W1 | Rexroth | 50 A | 300 V | Water | Higher current; drop-in upgrade for heavier loads |
| HDS03.2-W075N | Rexroth | 75 A | 300 V | Water | Next-gen HDS series; requires firmware/parameter migration |
| DKC03.3-040-7-FW | Rexroth (EcoDrive) | 40 A | 300 V | Air | EcoDrive03 series; different parameter structure |
Important: Always confirm motor-drive pairing using Rexroth’s motor selection tool or consult your system integrator before substitution.
Why Choose the Original Model
- Proven DIAX03 platform — field-tested in thousands of CNC and robotics installations worldwide
- Water-cooled design (W1) — ideal for high-duty-cycle applications where ambient temperature management is critical
- SERCOS fiber optic interface — deterministic, noise-immune communication for multi-axis synchronization
- Wide motor compatibility — supports MKD, MHD, and MKE servo motor families via DSF/MSF feedback
- Mature ecosystem — extensive documentation, spare parts availability, and global service network
Typical Applications
- CNC machining centers (milling, turning, grinding)
- Industrial robots and gantry systems
- Injection molding machines
- Printing and packaging machinery
- Semiconductor and electronics manufacturing equipment
- Textile and winding machines
System Compatibility
The TDM3.2-030-300-W1 is designed to operate within the Rexroth DIAX03 drive system and is compatible with:
- Controllers: Rexroth DIAX03 CNC, Indramat TDM/KDS controllers, Siemens SINUMERIK (via SERCOS)
- Motors: Rexroth MKD, MHD, MKE series AC servo motors
- Power Supply Units: Rexroth TVD, TVM, KDV regenerative power supplies (300 V DC bus)
- Feedback Systems: DSF (Digital Servo Feedback), MSF (Motor Sensor Feedback), resolver
- Bus Topology: SERCOS I fiber optic ring (2 Mbps / 4 Mbps / 8 Mbps)
Selection Guide
Use the following criteria to confirm the TDM3.2-030-300-W1 is the right choice — or to identify the correct alternative:
- Step 1 — Verify current rating: Confirm your motor’s continuous and peak current requirements. The TDM3.2-030-300-W1 provides 30 A continuous. If your motor requires more, consider the TDM3.2-050-300-W1.
- Step 2 — Confirm bus voltage: This unit operates on a 300 V DC bus. Ensure your power supply unit (TVD/TVM/KDV) matches.
- Step 3 — Cooling infrastructure: The W1 suffix requires a water cooling circuit. If water cooling is unavailable, select the W0 (air-cooled) variant.
- Step 4 — Feedback type: Confirm your motor uses DSF or MSF feedback. Resolver-only motors may require a different firmware module.
- Step 5 — Firmware version: Match the drive firmware to your CNC controller version. Contact us with your controller type for compatibility confirmation.
Quality Assurance & Sourcing
- All units sourced from authorized distributors or verified surplus channels
- Each unit undergoes visual inspection and functional verification prior to shipment
- Original Rexroth part numbers and labels preserved — no remarking or rebranding
- Traceability documentation available upon request
- Warranty: 90-day replacement warranty on all stocked units
- Export compliance: units shipped in accordance with applicable trade regulations
How to Order
- Online: Add to cart directly on this page — stock availability shown in real time
- Email RFQ: Send your part number, quantity, and required delivery to support@konmask.com
- Phone/WhatsApp: +0086 19859288691 (Mon–Fri, 09:00–18:00 CST)
- Bulk / OEM orders: Contact us for volume pricing and lead time
- We accept T/T bank transfer, PayPal, and major credit cards
- Global shipping available — DHL, FedEx, UPS, and sea freight options
Replacement & Compatibility FAQ
Q: Can I replace TDM3.2-030-300-W1 with TDM3.2-030-300-W0?
A: Yes, electrically they are equivalent. The only difference is cooling method (W1 = water, W0 = air). Ensure your cabinet has adequate airflow if switching to W0.
Q: Is the TDM3.2-030-300-W1 compatible with Siemens controllers?
A: Yes, via SERCOS interface. Siemens SINUMERIK 840D and similar controllers support SERCOS drives. Parameter mapping may be required.
Q: Can I use a newer HDS or HMS drive as a replacement?
A: Functionally possible, but requires parameter migration, new motor feedback cables, and potentially updated CNC software. Consult your system integrator.
Q: Do you provide a test report or inspection certificate?
A: Yes, available upon request for all units. Please specify at time of order.
Q: What is the lead time for out-of-stock units?
A: Typically 2–4 weeks for sourcing from our global supplier network. Contact us for urgent requirements.
© 2026 Konmask.com. All rights reserved.
Original Source: https://Konmask.com
Contact: support@konmask.com | +0086 19859288691
